Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4979 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

0  

1 member has voted

  1. 1. What size tee do you use?

    • 2 1/4"
      4
    • 2 1/2"
      1
    • 2 3/4"
      29
    • 3"
      5
    • 3 1/4"
      22
    • 3 1/2"
      2
    • 3 3/4"
      0
    • 4"
      2
    • Other
      0


Recommended Posts

Posted
2 1/4"
2 1/2"
2 3/4"
3"
3 1/4"
3 1/2"
3 3/4"
4"
Other

What size tee do you use?
What I Play:

Driver: Sasquatch SUMO² 9.5º Stiff
Hybrid: HiBore 16º (3W replacement)
Irons: Staff Ci6 3-PW StiffWedges: Vokey Spin Milled 54.10 60.04Putter: Newport Studio Style 35"Ball: Pro V1xAge: 15

Posted
Started playing the 2.75" zero friction tees this season. I like them and have noticed a slightly tighter shot dispersion. Not a lot, but enough to notice.

Driver: Cobra S2 9.5 Fubuki 73 Stiff | Wood: Titleist 909H 17 Aldila Voodoo Stiff | Irons: Titleist ZB 3-5, ZM 6-PW DG S300 | Wedges: Titleist Vokey SMTC 50.08, 54.11, 60.04 DG S200 | Putter: Scotty Cameron Fastback 1.5 33" | Ball: Titleist Pro V1x


Posted
2 3/4". I don't care about the brand or anything. I tee up pretty low, so I can use as little as a 2 1/4", but I don't prefer it.

Driver: Big Ben C-S3
3w: Tight Lies
Irons: T-Zoid True
Wedges: Vokey 56* and 60* spin-milled
Putter: unknown 3-ballBall: HX-Tour/Tour ix


Posted
I've tried many varities of tees, but nothing really seems to be so problem free as 2 3/4 wooden tees. With the expensive new plastic ones from Callaway, I'm worried about trying to find them. The brush tees have problems with getting the ball to sit right, plastic tees also are touchy in getting the ball to sit, and they offer more resistance.

So hit the ball, and don't worry about where the tee is, that's the best.

2009 Burner R
FT-I Fusion Squareway 3W 15* Fujikura Speeder Fit-On R
5W R7 R
FT Fusion Hybrids Draw 3/21*, 4/24*
G5 5-PW X-forged Vintage: 52.12, 56.14MDScotty Cameron: Newport 2 ProV1


Posted
Used to only use the "standard" size white tees.

I still mainly use those.

My driver gets teed up just enough to put the ball's equator at the top of the clubhead....not very high by todays standards.

I imagine the I'll have to go with taller tees once I replace my driver with a more modern offering.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
Ill use whatever i can get my hands on. Im not picky about tees at all.
THE WEAPONS CACHE..

Titleist 909 D2 9.5 Degree Driver| Titleist 906f4 13.5 degree 3-Wood | Titleist 909 17 & 21 degree hybrid | Titleist AP2 irons
Titleist Vokey Wedges - 52 & 58 | Scotty Cameron Studio Select Newport 2 Putter | ProV1 Ball

Posted
With a driver I'll use a 3 1/4", but with a 3 wood or on par 3's ill use something shorter.

In My Bag:

Driver: R7 460
5w: Bah!
3w: F Speed LDHybrid: CPR3 3iIrons: Acer XK High Trajectory 4-PWWedges: Vokey Spin Milled 52* 54* 60*Putter: Daytona CGBBall: One Platinum Tour ix


Posted
2 1/4°"
Not sure that I have a reason for this....other than I feel I'll break less of the shorter tees.

Posted
All dependent on the turf conditions of the tee box. I use anything I find...but generally 2-3/4" to 3"...and has to be wooden and not plastic (will dent and mar your drivers)

I don't think about the length of the tee...rather placement to where 1/4 of the ball is above the crown for my driver....and 1/8" above turf line for all other tee shots. Want consistency of the ball to the club face.

Posted
I currently use a 2 3/4 tee
Perfect for me
  • 1 month later...
Posted
i use a 5 7/19" this season as opposed to the 5 6/19" i used during the winter due to the grass growing a fraction of an inch.

tees are a waste of money

Posted
plastic tees also are touchy in getting the ball to sit, and they offer more resistance.

...and has to be wooden and not plastic (will dent and mar your drivers)

either of ya'll have a link to back up either of those statements?

What's in the bag... ( Revolver)

Driver: Big Bertha Diablo 8*
3 Wood: 4DX Fairway 15*
3I-PW: X20 Tours (Rifle Project X Flighted 6.0)Wedges: CG12 Black Pearl 50* 54* SM Vokey X-Forged 58* C GrindPutter: Classic #2 66* lieBalls: Various

  • 3 years later...
Posted

Currently, I use 2¾ Professional Tee Systems tees. I really like them as I put them in the ground up to the painted yellow line and it seems to put half the ball over the head and half just right. Reading though, my driver is 460cc and it recommends 4" tees. Anyone know why that is?

I might try out the 3¼ so I can get more tee in the ground and have a sturdier base for my ball.

2013 Nike VR_S Covert Performance Driver

2013 Nike VR_S Covert Perfomance 15° 3W

18° Burner 1.0 Superlaunch Rescue Hybrid

:mizuno: 4-PW MP-69 Irons

50°, 54° & 58° ATV wedges

Classic Collection #1 Black Putter

:bridgestone: Tour B330 Balls

2013 Tour v3 Laser Rangefinder w/ Jolt Technology

You don't know what pressure is until you play for five bucks with only two bucks in your pocket. -Lee Trevino


Note: This thread is 4979 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.