Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6386 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Right now, I have two drivers: Titleist 905T 9.5 * and Callaway BB460 10*. I hit the BB460 way too high, but I am more consistent with it. It has the stock Aldila NVS 55 shaft while the Titleist has the Grafalloy Blue shaft. I am wanting to put a new shaft in the BB460. I was wondering how much of a difference a shaft can make on spin and launch angle. I have a swing speed of about 105 mph. Also, what shafts should I consider.

And while I'm at it, what difference do different shaft options (torgue and stiffness, etc.) have with irons and wedges. Is there a way to increase spin on irons with different shafts?

Thanks for the wisdom guys.

In my bag:

DRIVER: 905T w/ Fujikura E360 Shaft
3 Wood 906 F4 w/ Aldila Proto "By You"
Irons: MP 30 w/ Rifle 5.5 Wedges Oil Can 50*, Vokey SM 54* and 58*Putter: C-06


Posted
if you like your BB460 then you might want to try a heavier shaft. this will keep it lower (the nvs 55 is VERY light!!!). I believe the shaft plays a VERY important part in getting the correct launch conditions. i have never used one of the launch monitors that golf shops now carry, so you may look into that and see if that can stear you in the right direction. as for your second question. it plays a factor in any golf club...woods or irons. a lot of guys are using the "Spinner" steel shaft in there wedges, made by Royal Precision (Rifle), so there may be something to that shaft of the wedges.

♠ In the bag ♠
Driver► R7 SuperQuad 10.5º, ProForce V2 X
3 Wood► Steelhead III 15º
Hybrid► 2008 Baffler Pro 18º 2/R
Irons 3-P► 2008 Pro CB, Project X 6.0, +¼", 2° UpWedges► 52° RTG+DSG, 58º RTG+DSGPutter► White Hot Tour #1Ball► Pro V1xWhere I play:...


Posted
if you like your BB460 then you might want to try a heavier shaft. this will keep it lower (the nvs 55 is VERY light!!!). wedges.

How does the weight in the shaft play a part in launch angle? I thought the torque, kick point and flex would play that part? Or does the weight allow the shaft to have these properties? I'm very intrigued by all of this!

In my bag:

DRIVER: 905T w/ Fujikura E360 Shaft
3 Wood 906 F4 w/ Aldila Proto "By You"
Irons: MP 30 w/ Rifle 5.5 Wedges Oil Can 50*, Vokey SM 54* and 58*Putter: C-06


Posted
I'm also thinking i need a new shaft: I had a great driving day this past weekend, with drives consistently in the 280 range, but they were a mile high it felt. I'm wondering if I'd get a better carry if my trajectory were lower on impact.

My current is R7 9.5 + ProLaunch Blue R65. No idea on my swing speed. Thoughts?

Ken
http://labs.live.com/photosynth

Driver: R7 425 9.5 ProLaunch Blue R65
3W: Raylor Burner RegIrons: R7 TP 3-PW ProjectX 6.0GW: 52/8 Vokey Oil CanSW: 56/14 Vokey Spin Milled Oil CanPutter: 330 PutterBag: Grom


Posted
Right now, I have two drivers: Titleist 905T 9.5 * and Callaway BB460 10*. I hit the BB460 way too high, but I am more consistent with it. It has the stock Aldila NVS 55 shaft while the Titleist has the Grafalloy Blue shaft. I am wanting to put a new shaft in the BB460. I was wondering how much of a difference a shaft can make on spin and launch angle. I have a swing speed of about 105 mph. Also, what shafts should I consider.

Both of those shafts you have listed are meant to give a medium trajectory and "similar" overall weights (listed as only 8gms difference) so providing the loft of both drivers and the head type is similar which they sort of are they should launch reasonably similar. My best advice is to take both drivers to a clubfitter and get on a launch monitor, that is the only way to find out what is really happening without just guessing. Probably the first thing he will do is actually measure the loft of both drivers, as they do sometimes vary a bit from what is stamped on them.

If you really just wanted to try a low launching shaft, the Diamana White Board is probably about as low as you can go without getting in to anything really exotic or priced at the ultra high end of the scale.

Note: This thread is 6386 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • That was a good watch. When I started working on pelvis in the backswing. I thought, this sounds contradictory to those leg straightening threads on the site. Erik has already done a correction. Then the last lesson we went more down the route of feeling the right knee gains flex. It doesn’t, but the feeling keeps my knee position in a good range. Also, I just realized how much extra work my right hip needed to do to stabilize the body with the proper weight shift. Those glute and hip stabilizers got worked. 🤣 I wish this evolution in the golf instruction happened 20 years ago! 😭
    • I've been Playing Golf for: 40 yrs My current handicap index or average score is: 4.0 factor My typical ball flight is: Straight however sometimes slight draw. The shot I hate or the "miss" I'm trying to reduce/eliminate is: squirt to the right due to to much arm not enough turn. Videos:  [Delete this, Embed Videos Here - https://thesandtrap.com/how-to/embed-videos/]
    • Wordle 1,656 3/6* ⬜⬜🟨🟨🟨 🟩⬜🟨🟨🟩 🟩🟩🟩🟩🟩
    • Wordle 1,656 4/6 🟩⬜⬜⬜🟨 🟩⬜⬜🟩🟨 🟩🟩🟩🟩⬜ 🟩🟩🟩🟩🟩
    • The first issue Erik spoke about is something we worked on for my swing during both GEARS sessions. GEARS was showing my pelvis center moving towards the ball during the back swing. I wasn’t the 4” guy though! This forced me to correct on the downswing to give myself space. My hip rotation was to high as well. We corrected it by first getting the weight off my heels in my stance and getting my posture correct. Then the feel was shifting back into my right hip at a 45 degree angle. This kept my pelvis center from moving towards the ball at the start of the backswing. I also didn’t sway back as much as I felt I did because of the angle I was shifting. Feel Ain’t Real. The cool thing about GEARS is as you work on something you can see the exact (Real) change happening. On video, it is much harder to spot this issue because of the 2D nature of filming. But I know what to look for now. Sadly, I was hurt all last year and most of this year so I really haven’t been able to work on it much. I did do a lot of backswing work though.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.