Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

Scotty Cameron Oil Can???


Note: This thread is 6326 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
does anyone own a Scotty Cameron with the Oil Can finish??? I'm stuck between a Pro Platinum Finish (which i have on my other 5 Camerons) and the Oil Can that came stock on this model. Does the oil can wear off and the putter starts to rust like oil can wedges or the circa 62' finish? or does it not rust? thats the one and only reason i have Pro Platinum on my others, its a beautiful lo-glare no maintenance finish. i just dont want to be steel wooling every round!! thanks
-WITB- USGA Index - 1.5
------------------------
Driver --Titleist 907D2 10.5* - Mitsubishi Rayon Diamana Blueboard
F.W. --Titleist 906F4 15.5* - Mitsubishi Rayon Diamana Blueboard
Irons --Mizuno MP-57 - Project X 6.0Wedges --Titleist Vokey Spin Milled 54* 58* - Dynamic Gold X100Putter --Cameron...

Posted
it will definately show some signs of wear after a while. just make sure you keep it dry and wipe it down during and after your rounds

In my Hoofer Vantage

Driver: 907D2 9.5*
Wood: 906F4 15.5* 3 wood
Hybrid: 585H 19*Irons: i10 3-pwWedges: tp black z 52* & 58*Putter: tracy II


Posted
thanks. all i needed to know. i'll pay the extra 30 bucks to get the finish i trust
-WITB- USGA Index - 1.5
------------------------
Driver --Titleist 907D2 10.5* - Mitsubishi Rayon Diamana Blueboard
F.W. --Titleist 906F4 15.5* - Mitsubishi Rayon Diamana Blueboard
Irons --Mizuno MP-57 - Project X 6.0Wedges --Titleist Vokey Spin Milled 54* 58* - Dynamic Gold X100Putter --Cameron...

Posted
I've had oil cans for over 2 years and they still look beautiful - haven't had to use steel wool either. I've had both and for me anyway, the oil can perform better, more spin which is what I was looking for.

Driver: Ping Rapture V2 9° TFS Stiff | 3 wood: Exotics CB 15° Fujikura HL Stiff | Hybrids: Adams Idea Tech V3 16° Stiff, TM Burner Rescue 19° & 22° REAX Stiff | Irons: Titleist 735.CM DG S300 5-PW | Wedges: Vokey Oil Can 254.10, 258.08 | Putter: Rossa Imola 34"


Posted
I've had oil cans for over 2 years and they still look beautiful - haven't had to use steel wool either. I've had both and for me anyway, the oil can perform better, more spin which is what I was looking for.

i have oil can WEDGES and love them. i was curious about a putter finish. thanks anyway lol

-WITB- USGA Index - 1.5
------------------------
Driver --Titleist 907D2 10.5* - Mitsubishi Rayon Diamana Blueboard
F.W. --Titleist 906F4 15.5* - Mitsubishi Rayon Diamana Blueboard
Irons --Mizuno MP-57 - Project X 6.0Wedges --Titleist Vokey Spin Milled 54* 58* - Dynamic Gold X100Putter --Cameron...

Posted

Too funny

Driver: Ping Rapture V2 9° TFS Stiff | 3 wood: Exotics CB 15° Fujikura HL Stiff | Hybrids: Adams Idea Tech V3 16° Stiff, TM Burner Rescue 19° & 22° REAX Stiff | Irons: Titleist 735.CM DG S300 5-PW | Wedges: Vokey Oil Can 254.10, 258.08 | Putter: Rossa Imola 34"


Posted
The day someone makes a putter that you can hit hard at the hole, completely blow past it, but the ball backs up because of spin, I'm gonna be a scratch golfer.
Favorite Practice Course:
Z Boaz Municipal, Fort Worth <<< Ben Hogan grew up playing here!
--------------------------------------------------

In the bag: 983E 9.5*, Fuji Speeder S RPM LP, 4W, Neutral Bias STAFF Ci6 irons, S (going up for sale soon) Tom Watson PVD 08 Wedges (G.S,L)... and a 4...

Posted
The day someone makes a putter that you can hit hard at the hole, completely blow past it, but the ball backs up because of spin, I'm gonna be a scratch golfer.

hahahahahaahahahaha. i'm pretty sure he was mistaken and talking about Oil Can Vokey Wedges.

-WITB- USGA Index - 1.5
------------------------
Driver --Titleist 907D2 10.5* - Mitsubishi Rayon Diamana Blueboard
F.W. --Titleist 906F4 15.5* - Mitsubishi Rayon Diamana Blueboard
Irons --Mizuno MP-57 - Project X 6.0Wedges --Titleist Vokey Spin Milled 54* 58* - Dynamic Gold X100Putter --Cameron...

Posted
My next Scotty is gonna no doubt be a Circa '62. The feel on these is nice and crisp, like I suspect the oil can finished putter you were considering except the finish on them is a little more durable / weather resistant.

Don't get me wrong....I love my Studio Select....it's just a little softer than I'd like....ideally.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Note: This thread is 6326 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 18: 2026.01.20 Continuing work on arm raise during backswing. Starting to feel less weird, especially the slower I go. Looking like a busy week so might be the weekend before I can hit some balls.
    • It’s possible the graphite shaft has a small internal crack or a delamination. Tapping it and hearing a vibrating sound is usually a sign the shaft isn’t behaving as it should. Since the store wasn’t helpful, consider taking it to a club fitter or a pro shop that can check the shaft flex and integrity. If it’s defective, you might be able to get a replacement from the manufacturer.
    • It’s interesting how much a 3D system changes your understanding. Observing top players in full detail and realizing the trail knee shouldn’t fully extend is a great example of why being open to new info is so important. I like your approach: not trying to be “right,” but trying to teach correctly based on actual evidence. Makes sense why golfers would benefit from this perspective.
    • I would say both are equally not the best for golf. Is it better than nothing, sure.  Golf is an athletic motion. Professional golfers are doing a comprehensive workout routine focusing on strength, power, flexibility, stability. They might include some yoga into the routine. I would put both of them in the recovery bin, not golf enhancement bin.  If you want to increase swing speed, core strength, longevity in golf and life, then lift heavy weights. 
    • Wordle 1,676 3/6 ⬜⬜⬜⬜⬜ 🟩⬜🟨⬜⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.