Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

How High (or low) do you tee it up with your driver?


Note: This thread is 6276 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

0  

  1. 1. How high do you tee up for your driver?

    • High
      24
    • Low
      7
    • Who cares
      2


Recommended Posts

Posted
I've always been one to tee the ball rather low and by low I never have the top of the ball above the top of the driver. I've read that teeing the ball high will produce less fade and/or slice.
When I have tried teeing higher I almost always pop the ball up. I have a pretty upright swing with my irons and feel that my driver isn't flat enough. What are your thoughts? High low or who cares? And why?

In my BagBoy Griplok bag
Driver: Diablo 9 degree stiff graphite
3 Wood: Diablo 15 degree stiff graphite
Hybrid: Hb5 3 stiff graphite
Irons: FG Tour V2 stiff steel  S W: Harmonized 55 degree

Putter: Odyssey Teron

Ball: E6

GPS: UPro


Posted
Tee 'em high and let 'em fly! When Im hitting driver I tee the ball up so that the middle of the ball is even with the crown of the club.
That way you hit the ball on the part of the clubsface that is the thinnest and most springy and even if you come up on it a little bit you will still make pretty solid contact.
My driver shots go plenty high, the only problem is they go about 50 yards to the right.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Posted

I try to tee mine up high, although my driver is a pretty small one so that's not all that high. I definitely have a problem with pop-ups -- somehow I manage to defy the laws of physics and swing my 3" tall driver under a ball teed up an inch and a half. Still don't quite understand that

In the bag:
FT-iQ 10° driver, FT 21° neutral 3H
T-Zoid Forged 15° 3W, MX-23 4-PW
Harmonized 52° GW, Tom Watson 56° SW, X-Forged Vintage 60° LW
White Hot XG #1 Putter, 33"


Posted
Tee it up with no ball or barley any over the crown of the club. I actually started lowering it today, and no lie( I have two witnesses) I hit one about 320 and didn't even hit the middle of the face. I believe it makes me able to hit the middle of the club face better.

Driver: Hyper X Tour 10.5* Graffalloy Prolaunch Blue Stiff Shaft
Hybrid: Acer Select 5000 16* Ping Cushin Stiff Shaft
Irons: NDS 3-PW (missing #7, replaced with clone) True Temper Uniflex SpeedStep Shaft
Wedges: Acer XK Tour 56*10 Precision Stiff Shaft, Revolution 60*10 True Temper Wedgeflex


Posted
I always tee my ball so half of it is over the top of my driver face. I've always been told this is about the right height.
DRIVER - SQ Sumo2 5900 10.5*
3 WOOD - Wrath 15*
HYBRIDS - Wrath 3I 18*/4I 21*
IRONS - Wrath 5-PW
WEDGE - 60*PUTTER - Callie 35"BALL - Juice 312 #4's

Posted
I always tee up high because lately I've been having trouble topping the ball. Of course with my luck whenever I purposely tee the ball up high, it goes 300 yards away....strait up in the air that is.

l Bag l TaylorMade Stand Bag

l Driver l TaylorMade '07 Burner 9.5* l 3-Wood l Titleist 910F 15* (D1 shaft setting)

l Hybrids l TaylorMade '07 Burner 19* : TaylorMade '10 Rescue 22*

l Irons l TaylorMade r7 5-PW l Wedges l Titleist Bob Vokey 52* 56* 60*

l Putter l Scotty Cameron California Del Mar 34" l Balls l TaylorMade Penta TP


Posted

Well, I have always heard the same, tee it high and let it fly, but we were at East Lake for the TC, and on 9, the 600 yd downhill par 5, we could get right behind the tee boxes, within 10 yds.

We watched about ten groups go through, and all but a couple of the pro's tee'd teh ball really low. My buddy, who is a pretty good golfer, said that they tee it lower for accuracy.

Since seeing this, I have bee teeing my driver much lower, with much better results, so I'd say I'm a low tee'er....

--
Driver: R7 460 9.5 Stiff Shaft
Fairway Woods: Steelhead 3 and 5 Stiff Shaft
Irons: :: R7 CGB Stiff Shaft Steel
Wedges: Vokey 56 / 52 Stiff ShaftPutter: Oddysey White HotBag: R7 Stand bagRangeFinder: (Nikon) LR550Ball Prefer Pro-V1, but usually play what you just lostâ¦..


Posted
Voted for "who cares" because I wouldn't consider my tee height high or low...probably somewhere in the middle....say a quarter of the ball above the crown.

In my Datrek Rage bag:
Driver: Sumo 5000 w/ Aldila VS Proto Stiff
4-Wood: SasQuatch 2 w/ Diamana Stiff
Irons: AP2 4-PW w/ PX 6.0
Wedges: Zodia US Spec 52*, Yururi Gekku 57*, 588 DSG RTG+Putter: Scotty Cameron Studio Style 3.5 or Odyssey White Hot Tour #1Ball: ProV1 or whatever I find!


Posted
The top of my tee sits right in the lower half of my middle third of my middle finger. If you know the area I'm talking about then kudos to you.

For those who didn't follow that, about an inch or so for my tee height.

Posted
I vary depending on factors like wind. If the wind is behind me, I typically tee it high to get a higher flight so the wind can carry it more. If it comes from any other direction, I tee it low to keep it down and hopefully get more roll. I always buy the type of tees that are painted such that you can place it with a consistent height...low or high.

In the bag:
Ping G5 Driver 9 degree, Ping G10 3-wood, Nike 3 hybrid, TaylorMade R9 Irons 4-AW, Cleveland CG15 56 and 60 degree wedges, Odyssey 2-ball blade putter


Note: This thread is 6276 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • In terms of ball striking, not really. Ball striking being how good you are at hitting the center of the clubface with the swing path you want and the loft you want to present at impact.  In terms of getting better launch conditions for the current swing you have, it is debatable.  It depends on how you swing and what your current launch conditions are at. These are fine tuning mechanisms not significant changes. They might not even be the correct fine tuning you need. I would go spend the $100 to $150 dollars in getting a club fitting over potentially wasting money on changes that ChatGPT gave you.  New grips are important. Yes, it can affect swing weight, but it is personal preference. Swing weight is just one component.  Overall weight effects the feel. The type of golf shaft effects the feel of the club in the swing. Swing weight effects the feel. You can add so much extra weight to get the swing weight correct and it will feel completely different because the total weight went up. Imagine swinging a 5lb stick versus a 15lb stick. They could be balanced the same (swing weight), but one will take substantially more effort to move.  I would almost say swing weight is an old school way of fitting clubs. Now, with launch monitors, you could just fit the golfer. You could have two golfers with the same swing speed that want completely different swing weight. It is just personal preference. You can only tell that by swinging a golf club.     
    • Thanks for the comments. I fully understand that these changes won't make any big difference compared to getting a flawless swing but looking to give myself the best chance of success at where I am and hopefully lessons will improve the swing along the way. Can these changes make minor improvements to ball striking and misses then that's fine. From what I understood about changing the grips, which is to avoid them slipping in warm and humid conditions, is that it will affect the swing weight since midsize are heavier than regular and so therefore adding weight to the club head would be required to avoid a change of feel in the club compared to before? 
    • I think part of it is there hasn't been enough conclusive studies specific to golf regarding block studies. Maybe the full swing, you can't study it because it is too complicated and to some degree it will fall into variable or random.  
    • Going one step stiffer in the golf shaft, of the same make and model will have minor impact on the launch conditions. It can matter, it is a way to dial in some launch conditions if you are a few hundred RPM off or the angle isn't there. Same with moving weights around. A clubhead weights 200-220 grams. You are shifting a fraction of that to move the CG slightly. It can matter, again its more about fine tuning. As for grip size, this is more personal preference. Grip size doesn't have any impact on the swing out of personal preference.  You are going to spend hundreds of dollars for fine tuning. Which if you want, go for it. I am not sure what your level of play is, or what your goals in golf are.  In the end, the golf swing matters more than the equipment. If you want to go to that level of detail, go find a good golf club fitter. ChatGPT is going to surface scan reddit, golfwrx, and other popular websites for the answers. Basically, it is all opinionated gibberish at this point.   
    • Wordle 1,640 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.