Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6119 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Anything I need to know when installing a grip? I've got a kit that I bought at Austad's and a grip also.

The kit has some alcohol type stuff to clean off the old goop I assume, new grip adhesive as well. I assume the shaft should be warmed to room temperature before installing the grip?

 - Joel

TM M3 10.5 | TM M3 17 | Adams A12 3-4 hybrid | Mizuno JPX 919 Tour 5-PW

Vokey 50/54/60 | Odyssey Stroke Lab 7s | Bridgestone Tour B XS

Home Courses - Willow Run & Bakker Crossing

 

Awards, Achievements, and Accolades

Posted
the liquid is solvent. it's simple. remove the old grip, remove the old tape. put on new tape. pour the solvent all over (thoroughly) the new tape, slide the new grip on. If your shaft is steel, removing the old grip is easy, just cut it and peel it. If it's graphite - be careful not to scrape the shaft - it will cause it to split in time...

google it!

driver: FT-i tlcg 9.5˚ (Matrix Ozik XCONN Stiff)
4 wood: G10 (ProLaunch Red FW stiff)
3 -PW: :Titleist: 695 mb (Rifle flighted 6.0)
wedges:, 52˚, 56˚, 60˚
putter: Studio Select Newport 1.5


Posted
I see that the link didn't work. I am a bit new to this, but if you go to you tube and search "golf grip instalation" you will find some great visual aids.
Good luck,

Tim
Posted
I would take the time to look at the numerous video tutorials online. It's not that hard. Many times the hardest part is simply getting the old grip off (and not hurting your graphite shafts). I think the hardest thing is making sure it's on straight. That may not sound like a big deal but it sure is when doing your putter.


 


Posted
Thanks guys.

I will be installing the grip on my driver.

I realize it's not hard to install a grip but little tips like the ones you provided help.

 - Joel

TM M3 10.5 | TM M3 17 | Adams A12 3-4 hybrid | Mizuno JPX 919 Tour 5-PW

Vokey 50/54/60 | Odyssey Stroke Lab 7s | Bridgestone Tour B XS

Home Courses - Willow Run & Bakker Crossing

 

Awards, Achievements, and Accolades

Posted
No offense, but use the search function and type "regrip" in ;)

Driver TP Burner 8.5* Stiff
3 Wood SQ 15* stiff
5 Wood SQ 19* stiff
Irons MP 67 (3-PW) stiff
Wedge 52* and 56* stiffPutter Mtisushiba Ball


Posted
I think I'm going to have to regrip my wifes "new clubs" we got them used on ebay and the grips are a little slippery.

Just gotta find out what grips are best for her.

In my Staff bag:
Bazooka HP-5 Driver 460cc
Bazooka OS HP-5 3/5 Woods
Jmax QL Irons 5-PW (Graphite Stiff Shafts)
X-tour Gap Wedge 52* X-tour Sand Wedge 56* Lob Wedge 60* Rossa Daytona 1 Putter


Posted
I have tried the method using an air compressor and it's almost ridiculously easy. All you need is an air compressor with a thin nossle and some form of plastic pipe to prevent the grip from exploding. Once you have tried it once or twice it's something that can be done in a matter of seconds, without using any solvents, tape or knife. If you want, you can remove the old and add some new tape to the shaft once you've got the grip off.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted
I think the hardest part of installing your first ever grip is just doing it.

Once you see how simple it really is, you'll wonder why you ever paid someone to do it for you.

Take your time, use lots of solvent for your first install, keep everything square and you'll be fine. Remember, the worst thing that can happen is that you'll ruin a good grip and have to start all over.

Here's a video of a simple regrip, this guy is a little sloppy with the solvent.



Posted

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted
Get a hooked utility blade to cut off the old grip - way easier, doesn't scrape shafts, harder to cut yourself.

I find that on graphite getting the old tape off is easier if you heat it with a hairdryer or something. After that I take them outside and clean them off with just a bit of lighter fluid (removes old glue) and then rubbing alcohol (to make sure there's no lighter fluid left and the tape will stick).

I grip them inside on a vise (toe up) with the Brampton's stuff and the 2" wide tape (one strip right down the shaft, it's great) cut to 11" with roughly 1/2-3/4" sticking off the butt end to twist and fold into the shaft. USE PLENTY OF ACTIVATOR - put more on the butt end than you think you need as this will get pushed over by the entire grip and the grip will push the goop forward as you slide it on.

If you're using grips where alignment matters (New Decade Multi-compound and the like) I'd also check the grip position from address. setting it on the vise with the toe pointing up gets it close, but I like to make sure the grip is in line with the shaft when the club is in the address position - the NDMC grips have three white dashes you use to line up the grip.
In the bag:
905R 9.5° - UST ProForce V2 65R
909F2 15.5° Titleist Diamana 75
909H 19° Titleist Diamana 80
Zing 2 3-PW Vokey SM48.08 @ 51° Vokey SM56.11 Unitized Leo

Note: This thread is 6119 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.