Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6132 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
My wife's set is Callaway X20 and she uses a SW that comes with the set. She has been played for almost two years and getting better. She starts to feel uncomfortable using X20 SW around the green. One day, she tried my blade wedge and likes it a lot. I guess it's because of its versatility.

I'm thinking about giving her my old Cleveland 588 54* and Spin Milled 60*. The problem is that she is short, like 5'1". Her X20 irons were cut down 1 inch and the lie angle has been flatten like crazy, probably 3 or 4 degree. Sure. she got fitted by Callaway club fitting professional. I can't remember.) As I know, wedge's shaft is stiff flex and, if it is cut down for an inch, it will be stiffer.

I rarely see her full swing a SW tho. The gap between SW and PW is small.

Should I cut it down or install a new shaft? For a new shaft, what kind of shaft and spec would be suitable for her? Thanks for help!

Posted

I would say, just cut it down an inch.

Most golfers rarely take a full swing with a sand or lob wedge, so the extra stiffness really won't be an issue.

All wedges come with basically the same "wedge flex" shaft, so reshafting will just get you the same shaft you already have.

I really don't think there will be a problem. The shaft may be ever so slightly stiffer, but the club will be significantly lighter, which will make it easier to swing.

Good for her, you're a good husband!


I got a set of clubs for my wife once... Good trade huh?


Posted

Here is a link for a story on wedge shafts (it was just posted a day or so ago). Basically, what the writer is saying is that shafts in wedges should 'approximate' the flex of the shafts in your irons. In this case, cutting your shafts for your wife might not be the best option. Either new shafts or buy her new wedges (instead of your devious plan to give her your old wedges then buy new for you... ). I know Cleveland at least has made wedges specifically for women. I'm not sure about other manufacturers, though. Flex, length and lie angle are still important with wedges for women just like they are for men (although it's probably one of the least 'fit' clubs in the bag for most golfers).


http://www.oobgolf.com/content/the+w...dge_Shaft.html

Driver: SQ DYMO STR8-Fit
4 Wood: SQ DYMO
2H (17*), 4H (23*) & 5H (26*): Fli-Hi CLK
Irons (5-6): MX-900; (7-PW): MP-60
Wedges (51/6*): MP-T Chrome; (56/13): MP-R ChromePutter: White Hot XG 2-Ball CSPreferred Ball: e5+/e7+/B330-RXGPS Unit: NEOPush Cart: 2.0

Posted
If you aren't using your Cleveland wedges (which you aren't according to your sig) then it really wouldn't hurt to cut them down, put on some women's grips, and let her try. You could always extend the shafts back.

"You can foment revolution or you can cure your slice - life is too short for both" David Owen

WITB*: 2010 winter edition

Driver: AyrtimeFW/hybrid: Distance Master Pro Steel 5w, 7w, 27* hybridIrons: Powerplay 5000 hybrids (6i-SW)Wedge: SMT Durometer 55 degPutter: Z/I Omega mallet*as soon...


Posted
One day, she tried my blade wedge and likes it a lot. I guess it's because of its versatility.

If she likes your blade wedge after the demo, why not let her demo the other wedges before cutting anything? They may work just fine right out of the garage. Sounds to me like she's looking for a better chipping club, if the shaft works "as-is"... Maybe just give her your blade wedge and get a new stick for yourself. Sounds like a win-win!

Posted

Thanks for all inputs!

I am no way justified to buy new sticks for myself because last year I replaced those two wedges I plan to give her with two Fourteen wedges... So, I'm a good husband who is trying to get rid of my old stuffs .

I just saw a new Cleveland CG14 Bloom wedge for lady on the website. It is shorter and comes with lady flex. Most importantly, it's green. I will show her and see if she likes it.

The previous CG14 lady is pink and she hates it. With three observations consisting of my wife and her friends, I can say that an appearance is the primary concern for a woman golfer. She can't let a *pink* in her bag full of *blue*. (she has X20, TM CGB Max driver, divine line putter...all blue!).


Note: This thread is 6132 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • For someone with a very consistent swing speed and ball strike, upgrades may improve performance. For everyday golfers, probably not. I'm a rather odd player. I usually get best performance from basic pro or tour heads, but with lighter stock shaft from the model's standard driver set up. (Yes, current EXS is an exception.) When I get a full driver fitting, I usually try a couple of modest upgrade  (not super magic) shafts. Most of the time upgrade gives a couple of extra yards, or 10 yards less. Remember this about stock shafts: They are matched to a particular driver model to fit the type of player likely to adopt that model. Also, most OEMs offer a variety of stock shafts in their drivers. Test for which one works best. And, the final decider...  
    • Uh, seeing you're having trouble with hit-and-miss performance from inherited clubs... Get Fitted! IF the 910H pair don't work, swap them out. Also, only two degrees separation in loft is not much. You might consider a 4W (much more reliable than a 3W) plus hybrid. This would give more distance separation than two Hs. For hybrid, get one you can hit... Maybe a more benevolent 4H. Quite often I try to brand match my bridge clubs (FWs and Hs), and my irons and wedges... but not always. Whatever works!
    • Like others have said, get fitted. Since 2011, I have played some combination of 4W + 7W. I had a Cobra 3H and 4H a couple of years back, and would swap out the 7W for a 3H in cold months (keep out of cold wind, and rough thinner for wayward drives.) The 7W matched up with yardage often with 3H; the current 4H goes almost as long as 7W, but has a lower trajectory. 4H also bumped out 4i in last bag redo; I learned to hit stinger with 4H so that's my driving iron on tight holes with shallow landing area. Again, a side-by-side test will tell you which way to go. If 5W or 3H is meh, keep the 7W. Also, are you looking to replace the 7W with a 5W or 3H, or add a second bridge club (5W or 3H) to your bag?
    • Makes sense and aligns with other literature. Static stretching, especially for longer durations, can impede performance in strength and power activities. I would not want to do like hamstring, quad, and calf stretches then go immediately sprint. To me that sounds like a terrible Idea. I would rather start off walking, then jogging, then running, then ramp up to sprinting.  To me, static stretching isn't even a warmup activity. I like the term warmup; you want to get some exertion going before the activity.      a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }
    • Going to Florida for the usual February golf trip, and with our current weather, that date won't get here soon enough. Heading to Augusta GA for the Tuesday Master's practice round, will definitely get some golf in while I'm in the area for a few days. Hope to be able to catch up with @coachjimsc if he's around. Then it's back to Scotland first of July.  Playing 7 new courses, can't wait for that.  Then somewhere after that is the Rhode Island CC Member-Guest and then my normal October golf trip to Myrtle Beach.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.