Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6113 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Hello everyone, I am new to the forum. I just have a quick question. I have a problem at times of having a huge draw or hook on my Iron shots (mostly long Irons). I have been told from friends I play with they believe it is my hips, and front side not firing through so to speak.

How accurate would this be?

And what are some drills or things I can do to fix this, it doesn't happen all the time but when it does it I am missing my target by 30plus yards left.

Thanks so much.

My Bag
Driver-907D2 (V2 Pro Force Shaft)
Fairway woods-:503-H/Nickent Genex 3DX Ut
Irons-695 CB Forged (4-P)
Wedges-Tour Action (56/60)Putter- Sotty Cameron Pro PlatinumBall-Pro V-1"I have a tip that can take five strokes off anyone's golf game: it's called an eraser." ~Arnold Palmer


Posted
Lots of things can cause a hook, but not turning the hips can make your upper body move out against the ball and come over the top, so yes, I agree that lack of hips movement can cause this. If it's the case for you, I don't know.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted
Hips could be the issue but more specifically its your hands coming through to quickly.

that could be from:

-snapping your writs too LATE
-coming down with your arms first (instead of leading with your hips first)
-or NOT turning your hips at all (as your friends say)

I would guess its snapping your wrists too late...thats why they call it a snap hook...I guess

Posted
Well, let's start with how the ball goes. A draw ends up where you want it to go, a hook does not. Does your ball go straight left or does it start straight and spin to the left? I don't like all these terms of how a ball flies in golf. Hook, snap hook, draw, pull, pull-hook. Unless everyone use these terms to describe the same thing, it's useless. Where a ball end up is a result of two things; swing plane and clubhead position. If your ball has a draw to it, trying to fix a hook won't make any sense.

Begin with explaining where the ball starts and where it ends up.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted
You need the correct body movements, and you need your left shoulder pulling your arms and the club down and through. There is a $6.00 e-book that would probably help you a great deal, "The Golf Swing and Its Master Key Explained" by Noel Thomas. It has a money back guarantee, so all you can lose is the time to try it.

Posted
The ball starts out where I am aiming, then it hooks/draws left. It only happens about 4 or 5 times a round, but is very frustrating, as I believe it could drop my score by 3 or 4 strokes. When it normally happens I am between 15 and 20 yards left of my Target.

My Bag
Driver-907D2 (V2 Pro Force Shaft)
Fairway woods-:503-H/Nickent Genex 3DX Ut
Irons-695 CB Forged (4-P)
Wedges-Tour Action (56/60)Putter- Sotty Cameron Pro PlatinumBall-Pro V-1"I have a tip that can take five strokes off anyone's golf game: it's called an eraser." ~Arnold Palmer


Posted
It could just be that your are hanging back during impact (too much weight toward your right foot). If your freinds tell you that you are not firing through, are they talking about rotation or weight shift? You don't want to slide/sway, but you also do not want to hang back on your right side because that will cause a hook.
Driver: '07 Burner 10.5* R Flex ReAx Shaft
3 Wood: '07 Burner 15* R Flex ReAx Shaft
Utility: '07 Burner Rescue 19* R Flex Reax Shaft
Irons: MP-33 3-PW S300 Shaft
Wedge: X-Forged 52* Steel Shaft Wedge: X-Forged 58* MD-C Steel Shaft Putter: Studio Select Newport 2Ball: Burner TP

Posted
i would also check your grip. the grip is the start of your swing and if its too weak, it wil cause you to roll your wrist through
Posted
Two things determine where the ball goes... Swing PATH and club face. The ball starts on the line of the swing path then turns in the direction of face angle. So if the ball starts off right, then hooks, the swing was inside to out with a closed face. If the ball starts off left, then fades (or slices) the swing path was to the left and the face was open. The biggie on a hook is the starting left and hooking. That would be swinging to the left (more than likely over-the-top) with a closed club face.

To fix...... not a real easy fix. Work on starting the ball on line, then work on getting the face angle correct. Personally, I believe swing path is more important to get right than face angel. If the path is right, then face angle can be fixed more easily.

My swing thoughts:

- Negative thinking hurts more than negative swinging.
- I let my swing balance me.
- Full extension back and through to the target. - I swing under not around my body. - My club must not twist in my swing. - Keep a soft left knee


Posted
Thanks for the help guys, I am sure I do not have the entire prob fixed, but I was at the range today and worked on my Grip and that did make a difference, as I believe it put my body more in sync with the way it should be. Again thanks.

My Bag
Driver-907D2 (V2 Pro Force Shaft)
Fairway woods-:503-H/Nickent Genex 3DX Ut
Irons-695 CB Forged (4-P)
Wedges-Tour Action (56/60)Putter- Sotty Cameron Pro PlatinumBall-Pro V-1"I have a tip that can take five strokes off anyone's golf game: it's called an eraser." ~Arnold Palmer


Note: This thread is 6113 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 22 - 2026-01-11 More mirror work. Back outdoors tomorrow.
    • Day 11, 1/11/26.  Today was putting, along about 6' of carpet, with coins on the ground to keep me cognizant of what I'm doing.  I think this is the at-home drill from LSW. (Ugh, missed two of the last four days -- 1/10 and 1/8)
    • Day 9: 2026.01.11 Hit some balls at the range, concentrating on weight distribution at address, got some on film.
    • Day 468 - 2026-01-11 Loooooong day. Did some work in the patio door (as a mirror) when I got home.
    • I caught a video on this driver; the face tech seems crazy. Looking at the heat map for ball speed, hitting it basically anywhere on the face only loses a few percent ball speed. The surprising and counter intuitive part to me was that for flat faced clubs, ball speed loss is directly proportional to distance loss. For clubs with bulge and roll this is apparently not true. The surprising part of that story being that the max distance potential looks to be a tiny pee sized area for this driver, and I feel in general for drivers. The counter intuitive part being (the myth?) that blade irons have a pee sized sweet spot and missing that tiny spot causes dramatic losses. And that modern drivers, maybe 2017 on, have massive sweet spots and are ultra forgiving. Where in reality, if this heat map data is valid and reliable, it might be a bit of the opposite. This insane tech driver appears to have a pea sized "sweet spot" while Mizuno Pro 241 irons are 28% more forgiving compared to the average of all clubs measured. Not compared to other players irons, compared to all clubs from all categories, players to SGI! The Pro 241 being essentially just a solid chunk of metal with no "tech" at all. Which for me devolves into a whole mess of what is forgiveness really? And in measurable and quantifiable results how many yards, or feet, does that translate into?  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.