Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

Repairing chips.

mhodar13
 Share
Note: This thread is 6032 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

mhodar13 Well Established Member

mhodar13

Posted
Posted
Ok so on my Burner driver, there are a few very small faint chips right on the edge where the crown meets the face. They can't even be seen until you look very closely, and they don't bother me at address, but I want to touch them up so they don't increase in size. What should I buy that I could use to fill in the chips and touch them up so they blend nicely with the rest of the club? If anyone can help I'd greatly appreciate it. I've heard you can get some kind of stuff from wal mart or an auto store that works good. What exactly would I have to do with this to touch it up nice? Thanks.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Anyone? I know some of you have had to repair chips. Also, can anyone tell me which of the clubs on the following list have a crown color closest to the Taylormade 07 Burner? http://www.myostrichgolf.com/clubmak...roducts_id=626

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Ok, I fixed it. The first time I did just one coat of black spray paint, and it made it worse so I rubbed it off before it dried completely. This time I got it right. I did two coats of black spray paint, then a coat of clear coat, and then blended it smooth with 2000 grit sandpaper, just on the small part where the chips were, not the whole club. It all blends nicely and you have to almost look with a magnifying glass to see it now.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Man, chips are stubborn as all hell! There were four tiny chips, two are gone, but the paint came off the other 2. they are really tiny, though. Can anyone please tell me how I can just fill them in and not have to worry bout the paint coming off? I don't care if the chip is still there I just want it filled in black. Please, someone.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


twinke masta Well Established Member

twinke masta

Posted
Posted
I remeber someone saying something about black nailpolish or nailpolish in your driver's color? or using model paint (like hobbies paint) works well too

In my TerraFirma X Bag
360 Ti 10.5° Driver
FT-i Squareway 15.0° 3w
04 Big Bertha 19.0° 5w
04 Big Bertha 4-9, PW, GW +1/2" Irons Vokey Spin-Milled 56°10° SW C02 Milled 35" Putter Contour Shoes and SofJoy GlovesA mix of NXT and Laddie Xtreme balls


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
I remeber someone saying something about black nailpolish or nailpolish in your driver's color? or using model paint (like hobbies paint) works well too

Ok I'l have to find some black nailpolish. Hopefully it works. Problem with the spraypaint it just refuses to stick to the metal, and I'm not gonna prime it. Will nailpolish need primer?

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


twinke masta Well Established Member

twinke masta

Posted
Posted
I am not sure, you should probably ask a woman for that kind of information as I am not ready to remove myself from a confined space for clothing storage on an internet golf forum quite yet

In my TerraFirma X Bag
360 Ti 10.5° Driver
FT-i Squareway 15.0° 3w
04 Big Bertha 19.0° 5w
04 Big Bertha 4-9, PW, GW +1/2" Irons Vokey Spin-Milled 56°10° SW C02 Milled 35" Putter Contour Shoes and SofJoy GlovesA mix of NXT and Laddie Xtreme balls


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
I'm wondering if I should try to return it to dick's for a new one. I had the same driver in a 10.5 for a year and it didn't chip a single time. I've had this for a week, only used it twice, and I already have 4 chips. Anyone agree?

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Well, I got lucky today. My dad was going to home depot for a part, and I decided to go with him. While we were there, I wandered over to the paint isle to see what I could find. To my surprise, right on the endcap of the aisle, there was a rack with a bunch of different colors of craft/hobby paint. I looked closer, and I found one in "GLOSS BLACK". It was only 2 bucks so I got it, took it home, and it worked quite well on my driver. I also used it for a few chips on my 3 and 5 woods as well. Works great, stays on, and makes the chips unnoticeable until you look at it really close and the light reflects just the right way. It is almost a perfect match color-wise, maybe a hair duller. If I wax it, will it smooth it out a bit? Anyone know?

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


CG031 Great Member

CG031

Posted
Posted
Well, I got lucky today. My dad was going to home depot for a part, and I decided to go with him. While we were there, I wandered over to the paint isle to see what I could find. To my surprise, right on the endcap of the aisle, there was a rack with a bunch of different colors of craft/hobby paint. I looked closer, and I found one in "GLOSS BLACK". It was only 2 bucks so I got it, took it home, and it worked quite well on my driver. I also used it for a few chips on my 3 and 5 woods as well. Works great, stays on, and makes the chips unnoticeable until you look at it really close and the light reflects just the right way. It is almost a perfect match color-wise, maybe a hair duller. If I wax it, will it smooth it out a bit? Anyone know?

You already put the paint on it, now your thinking about waxing it? Wow, lol...

I think your over-exgerrating a bit on your clubs. It's just a chip on a golf club dude - they are going to wear, it won't hurt the performance of the club. I understand it's annoying to look at though. When my Scotty Cameron got a slight scratch on the bottom of the club I got pretty upset, but then realized it's a golf club and it's going to have it's wear and tear...

Driver Ping G10 10.5*
Hybrids Ping G5 (3) 19* Bridgestone J36 (4) 22*
Irons Mizuno MP-57 5-PW
Wedges Srixon WG-504 52.08 Bridgestone WC Copper 56.13
Putter 33" Scotty Cameron Studio Select #2


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Yeah, I agree 100% I just wanted to know if I should wax it because I've heard paople say it before. I did a really good patch job. I know clubs wear, and I know it doesn't matter if their is all paint or no paint, the club will still perform. I just like to fix things a bit when it is possible, that's all.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


Note: This thread is 6032 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • tomfig
      First Season With Blades - Let's Discuss

      By tomfig · Posted

      I’d go with the Titleist if you liked the look of the blades but were suffering with distance. They should be a little more forgiving than a full blade and still retain some workability. Also remember to consider the shafts each have as this will be a big contributor to how they feel. Clemsonfan is right though… get fit or spend a bit of time on a launch monitor 🤙
    • ConorHealy
      "5 Minutes Daily" Practice Challenge

      By ConorHealy · Posted

      Day 28: 2026.01.30 Managed to make time for a few swings out back today. Need a proper bit of range time this weekend.
    • Shindig
      "5 Minutes Daily" Practice Challenge

      By Shindig · Posted

      Day 30, 1/30.  Six minutes this morning hitting a few more range balls, indoors, off a mat, into the net.  Did this before leaving the house.
    • DeadMan
      Wordle Daily Puzzle

      By DeadMan · Posted

      Wordle 1,686 2/6 ⬜⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • tomfig
      My Swing (Tomfig)

      By tomfig · Posted

      Hi All my New Year’s resolution was to start playing golf again. I’ve caught the bug and am really enjoying hitting balls at a couple of my local ranges.looking forward to getting back out on courses in the spring. Based in the UK and 38 years old, I’ve been playing since I was a kid. Best handicap I’ve held is 2 in my mid 20s. Over the past 10 years I’ve played once or twice a year, sometimes with friends or for work. Could shoot 4-5 over, but just as easily shoot 15-20 over. I’ve moved to South Wales and am very lucky to be near some world class links courses, which gives me even more motivation to get playing again! I will start looking for a local coach in my area when I have more time to invest, but I recalled scouring this forum a few years ago and finding some good tips and advice so wanted to give it a try to see if there were any glaring issues I could fix in the meantime!  A few swings below… one from 1st week Jan and one from today. I have fixed my P1 takeaway to my liking and am now working on what I see as pretty severe early extension & hip thrust. Also terrible hip rotation. I’d like confirmation that this is indeed a problem and and suggestions on a few good drills. Thanks for reading 🙂 I've been Playing Golf for: 30+ years My current handicap index or average score is: 10ish over My typical ball flight is: mid The shot I hate or the "miss" I'm trying to reduce/eliminate is: push right with irons, hooks and push with driver!  Videos:     
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept