Jump to content
Subscribe to the Spin Axis Podcast! ×
Subscribe to the Spin Axis Podcast!
IGNORED

Repairing chips.

mhodar13
 Share
Note: This thread is 5845 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

mhodar13 Well Established Member

mhodar13

Posted
Posted
Ok so on my Burner driver, there are a few very small faint chips right on the edge where the crown meets the face. They can't even be seen until you look very closely, and they don't bother me at address, but I want to touch them up so they don't increase in size. What should I buy that I could use to fill in the chips and touch them up so they blend nicely with the rest of the club? If anyone can help I'd greatly appreciate it. I've heard you can get some kind of stuff from wal mart or an auto store that works good. What exactly would I have to do with this to touch it up nice? Thanks.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Anyone? I know some of you have had to repair chips. Also, can anyone tell me which of the clubs on the following list have a crown color closest to the Taylormade 07 Burner? http://www.myostrichgolf.com/clubmak...roducts_id=626

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Ok, I fixed it. The first time I did just one coat of black spray paint, and it made it worse so I rubbed it off before it dried completely. This time I got it right. I did two coats of black spray paint, then a coat of clear coat, and then blended it smooth with 2000 grit sandpaper, just on the small part where the chips were, not the whole club. It all blends nicely and you have to almost look with a magnifying glass to see it now.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Man, chips are stubborn as all hell! There were four tiny chips, two are gone, but the paint came off the other 2. they are really tiny, though. Can anyone please tell me how I can just fill them in and not have to worry bout the paint coming off? I don't care if the chip is still there I just want it filled in black. Please, someone.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


twinke masta Well Established Member

twinke masta

Posted
Posted
I remeber someone saying something about black nailpolish or nailpolish in your driver's color? or using model paint (like hobbies paint) works well too

In my TerraFirma X Bag
360 Ti 10.5° Driver
FT-i Squareway 15.0° 3w
04 Big Bertha 19.0° 5w
04 Big Bertha 4-9, PW, GW +1/2" Irons Vokey Spin-Milled 56°10° SW C02 Milled 35" Putter Contour Shoes and SofJoy GlovesA mix of NXT and Laddie Xtreme balls


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
  twinke masta said:
I remeber someone saying something about black nailpolish or nailpolish in your driver's color? or using model paint (like hobbies paint) works well too

Ok I'l have to find some black nailpolish. Hopefully it works. Problem with the spraypaint it just refuses to stick to the metal, and I'm not gonna prime it. Will nailpolish need primer?

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


twinke masta Well Established Member

twinke masta

Posted
Posted
I am not sure, you should probably ask a woman for that kind of information as I am not ready to remove myself from a confined space for clothing storage on an internet golf forum quite yet

In my TerraFirma X Bag
360 Ti 10.5° Driver
FT-i Squareway 15.0° 3w
04 Big Bertha 19.0° 5w
04 Big Bertha 4-9, PW, GW +1/2" Irons Vokey Spin-Milled 56°10° SW C02 Milled 35" Putter Contour Shoes and SofJoy GlovesA mix of NXT and Laddie Xtreme balls


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
I'm wondering if I should try to return it to dick's for a new one. I had the same driver in a 10.5 for a year and it didn't chip a single time. I've had this for a week, only used it twice, and I already have 4 chips. Anyone agree?

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Well, I got lucky today. My dad was going to home depot for a part, and I decided to go with him. While we were there, I wandered over to the paint isle to see what I could find. To my surprise, right on the endcap of the aisle, there was a rack with a bunch of different colors of craft/hobby paint. I looked closer, and I found one in "GLOSS BLACK". It was only 2 bucks so I got it, took it home, and it worked quite well on my driver. I also used it for a few chips on my 3 and 5 woods as well. Works great, stays on, and makes the chips unnoticeable until you look at it really close and the light reflects just the right way. It is almost a perfect match color-wise, maybe a hair duller. If I wax it, will it smooth it out a bit? Anyone know?

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


CG031 Great Member

CG031

Posted
Posted
  mhodar13 said:
Well, I got lucky today. My dad was going to home depot for a part, and I decided to go with him. While we were there, I wandered over to the paint isle to see what I could find. To my surprise, right on the endcap of the aisle, there was a rack with a bunch of different colors of craft/hobby paint. I looked closer, and I found one in "GLOSS BLACK". It was only 2 bucks so I got it, took it home, and it worked quite well on my driver. I also used it for a few chips on my 3 and 5 woods as well. Works great, stays on, and makes the chips unnoticeable until you look at it really close and the light reflects just the right way. It is almost a perfect match color-wise, maybe a hair duller. If I wax it, will it smooth it out a bit? Anyone know?

You already put the paint on it, now your thinking about waxing it? Wow, lol...

I think your over-exgerrating a bit on your clubs. It's just a chip on a golf club dude - they are going to wear, it won't hurt the performance of the club. I understand it's annoying to look at though. When my Scotty Cameron got a slight scratch on the bottom of the club I got pretty upset, but then realized it's a golf club and it's going to have it's wear and tear...

Driver Ping G10 10.5*
Hybrids Ping G5 (3) 19* Bridgestone J36 (4) 22*
Irons Mizuno MP-57 5-PW
Wedges Srixon WG-504 52.08 Bridgestone WC Copper 56.13
Putter 33" Scotty Cameron Studio Select #2


mhodar13 Well Established Member

mhodar13

Posted
  • Author
Posted
Yeah, I agree 100% I just wanted to know if I should wax it because I've heard paople say it before. I did a really good patch job. I know clubs wear, and I know it doesn't matter if their is all paint or no paint, the club will still perform. I just like to fix things a bit when it is possible, that's all.

In my White/Red/Yellow Monza Featherweight Stand Bag:
Driver: 07 Burner 9.5* stiff
3 Wood: 07 Burner 15* stiff
5 Wood: 07 Burner 18* stiff
Irons 4-AW: r7 steel shaft stiffWedges: RAC Satin 56*, 60*Putter: Rossa Daytona 35 InchBall: Bridgestone e7+, Titleist Pro V1Shoes: D3000Glove: ...


Note: This thread is 5845 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    TourStriker
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • WillieT
      "5 Minutes Daily" Practice Challenge

      By WillieT · Posted

      Day 87 (27 Jul 25) - Made it an easy session with the wedge this afternoon, worked on staying in the shot and not lifting out - split between low spinners and higher floaters.  
    • GolfLug
      What'd You Shoot Today?

      By GolfLug · Posted

      Shot my new low 72 (par 70) today. Had 5 birdies, also a new best, which included a hole out from the bunker on par 3 6th, and another hole out pitch from 15ish yards on the long par 4, 15th.  Got a couple of other good breaks. Except for an OB drive on 14th (and ensuing double bogey), not much went wrong. All in all I might have used up a year's worth of luck in a single day. 
    • DeadMan
      "5 Minutes Daily" Practice Challenge

      By DeadMan · Posted

      Back in the saddle after vacation.  Day 1: played 18. Did not have it, but still battled to an 82. Felt closer to a 90, but that’s fine. 
    • Carl3
      Differential vs Course Handicap

      By Carl3 · Posted

      Yes, I have seen this from the older crowd that play the 4,700 yard tees and want to know why they get less strokes from there. Always trying to game the system 🤣
    • iacas
      "5 Minutes Daily" Practice Challenge

      By iacas · Posted

      Day 300 - 2025-07-27 Good 44-ball segment. GSPro was acting goofy, so I just put it on the Quad. Then I hit a bunch of low spinners. Hit 14° down to 9.8° down, with the average closer to 12.3° or so. Focused mostly on the backswing. Right knee good, hands roll up and out a little before laying off (FAR).
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept
The popup will be closed in 10 seconds...