Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6002 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I have only been playing golf for about 2 years now. Really been big into it the past year. I have improved alot. Im consistently shooting low 90s now, should break into 80s any day now.

Im 5'11", 185 lbs. Not a huge power swinger, in fact one of things I think that has contributed to me hitting better is swinging slower.

I have the Adams A3 irons/hybrids and recently had shafts all changed to True Temper Dynalite high trajectory shafts. I also had them cut down about 3/4" to fit me according to True Temper's measuring system.

Ill be honest, this has been the best $200 I have spent in golf. Im not sure if its the shaft itself or the shorter length, or maybe the combo. But I hit my irons way better than I used too. 8/10 iron shots get high in air and look great.

With that being said, I do not hit my longer clubs very well. Im just now starting to get decent on my driver, but my hybrids and 3 wood... FORGET IT! And Im wondering if it has anything to do with shafts now? They are all the standard shafts the clubs came with.

So Im thinking about getting them all redone (3,4,5 hybrid and 3wood, driver). Anyone have any recommendations on some shafts? Id like something that I can continue to "try" and swing nice/easy tempo. Id also like something maybe a little on the lighter side. I perfer it lighter for some reason. Also wouldnt mind something to assist me in getting it higher!

Driver: D2 - 10.5° - Fujikura Rombax 5X07
5 Wood: R9 - 19°
Irons: Taylor Made CB
Wedges: Vokey Oil Can 52°, 56°, 64°
Putter: Scotty Custom Studio Design  Balls: ProV1


Posted
Get fit. by a hot styx or equivilant. Get lessons. or vice versa.

Aerolite III bag
MP600 10.5*
F-50 15*
MP57's Project X 5.5 3-PW
CG10 56* RAC 52* 60* 2 Ball putter ProV1/ProV1X Blackberry Storm GolfLogix


Posted
Yeah, a local clubfitter would be ideal. You would pay more at a specialty golf store, but it would probably be a more accurate fit than a Golf Galaxy or GolfSmith. Once you have your specs and are comfortable with your swing, you can always reorder custom fit shafts/clubs from TGW.

Posted
6'5" here so yes....fitting is must with most clubs.

I buy off the shelf drivers and fairway woods, though. They are currently made plenty long. Adding length to these is detrimental to me...control issues....shafts get whippy....etc.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Note: This thread is 6002 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I caught a video on this driver; the face tech seems crazy. Looking at the heat map for ball speed, hitting it basically anywhere on the face only loses a few percent ball speed. The surprising and counter intuitive part to me was that for flat faced clubs, ball speed loss is directly proportional to distance loss. For clubs with bulge and roll this is apparently not true. The surprising part of that story being that the max distance potential looks to be a tiny pee sized area for this driver, and I feel in general for drivers. The counter intuitive part being (the myth?) that blade irons have a pee sized sweet spot and missing that tiny spot causes dramatic losses. And that modern drivers, maybe 2017 on, have massive sweet spots and are ultra forgiving. Where in reality, if this heat map data is valid and reliable, it might be a bit of the opposite. This insane tech driver appears to have a pea sized "sweet spot" while Mizuno Pro 241 irons are 28% more forgiving compared to the average of all clubs measured. Not compared to other players irons, compared to all clubs from all categories, players to SGI! The Pro 241 being essentially just a solid chunk of metal with no "tech" at all. Which for me devolves into a whole mess of what is forgiveness really? And in measurable and quantifiable results how many yards, or feet, does that translate into?  
    • Wordle 1,667 3/6 🟨🟨⬜⬜⬜ ⬜⬜⬜🟨⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,667 3/6 ⬜⬜🟩⬜⬜ ⬜🟨🟩⬜🟩 🟩🟩🟩🟩🟩
    • Wordle 1,667 5/6* ⬛⬛🟧⬛⬛ ⬛⬛🟧⬛⬛ ⬛⬛🟧⬛⬛ 🟧🟧🟧⬛⬛ 🟧🟧🟧🟧🟧
    • Wordle 1,667 3/6 ⬜🟨🟩⬜⬜ ⬜⬜🟩🟩🟩 🟩🟩🟩🟩🟩 Now we’re getting all science-y.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.