Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5124 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hi everybody,
I'm considering buying a Ping G10 driver. Here's how I describe my golf game.
I probably carry the ball about 220-230 yards in the air with the driver. I hit the ball high. I currently have a Taylormade 580 9 degrees with the Taylormade stiff shaft. No problem getting it high enough
I've heard the Ping launches it high. Any suggestions on the loft and shaft that might work for me?
Thanks a lot for your help.

Posted
ya if you hit it high look into the i15 or the tm r7 superquad tp. i would recommend some from or tour player driver because of your high ball flight. i know when i switched to a callaway x460 tour (my first of over 7 tour drivers) i gained a good 20 yards. you could always go to a demo day for ping they have them all over

|callaway.gif X460 Tour Fujikura Tour Platform 26.3 73g | taylormade.gif 2i Rescue 11 |  3i HiBore Hybrid |  710 MB |  Wedge Works 48/06 |  cg12 52/08  | vokey.gifSpin Milled 56/11 | nike.gifSV Tour 60/10 | cameron.gif Studio Select Newport 2 34" |

 

rangefinder : LR550


Posted
I personally don't think there is much difference between name brand drivers. I do think the name brands are better than knock offs or inexpensive clones, but among the top brands one is pretty much as good as another. To me what is more important is finding one that suits your eye at address with a shaft that fits your swing. I've been gaming Nike drivers for about 18 months and I've been very happy with the choice. Both had the stock stiff shaft, but after gaming the Dymo 3w I preferred the feel of the shaft in it, so I traded in my old driver for the Dymo with the same shaft.

Ping makes great drivers and if you like it after hitting it I'd say it would be a great choice. I'm not a low capper by any means and one that is may well put more of a premium on a particular driver that I do, but in my experience I can play well (or badly) with just about any decent driver. Get a shaft that suits your swing and a driver than makes you happy and I'll bet your performance with it will be up to your capabilities.

Nike Vapor Speed driver 12* stock regular shaft
Nike Machspeed 4W 17*, 7W 21* stock stiff shafts
Ping i10 irons 4-9, PW, UW, SW, LW AWT stiff flex
Titleist SC Kombi 35"; Srixon Z Star XV tour yellow

Clicgear 3.0; Sun Mountain Four 5


Posted
Hi everybody,

The G10 is a great club

Although I did recently win a brand new 07-08 Taylormade Burner 10.5 with a regular shaft. Would probably fit you nicely. I can ship it contus $120 complete with head cover. Sorry for the obvious sales pitch but you could save some cash on a good driver and I can get rid of something i can't use without having to put it on Fleebay

Posted
The G10 is a great club

wow, just wow.

:cobra: Speed ld-f 10.5 Stiff
:snake_eyes: 3 & 5 Woods
:adams:A4 3 hybrid
:bridgestone: J33 Forged Irons 4-pw
:ping: 50th Aniv. Karsten Ansr Putter56*, 60* wedges


Posted
Might want to check out the Ping G10 9* with a ProLaunch Red shaft. I've seen a few of those on eBay for a decent price. I really like the G10 head since it feels so solid when I hit it.

« Keith »


Posted
wow, just wow.

What? a guy is helping someone out. This is no different than him putting it in the BST, only here he for sure will see it. Perhaps your for not helping people? Class act.

The G10 is a great head... not a huge fan of the shaft, always felt soft, no matter what flex it was, and went left easy for me.. if you wnat something lower launching, try out the NV, Rombax (i think its the Z, the grey one lol) Diamana Whiteboard, maybe a blueboard or Fubuki, a matrix F6M2, VS Proto, or go with the 7.5 dgree head. Going with the lowerlofted head means more sidespin tho, so be wary of that.

|Callaway FT-9 Tour Neutral 9.5 Diamana BlueBoard| TaylorMade TourLaunch 14.5 Matrix Ozik F7M2 X| Adams Idea Pro 20 Matrix Ozik Altus X| Mizuno MP-32 4-PW TTDG S300|Titleist Vokey 50| Tour Issue Titleist Black Ni Vokey SM 54|Callaway X Forged 62 || Kirk Currie Brazos| Callaway Tour IX/...


  • 4 weeks later...
Posted
Might want to check out the Ping G10 9* with a ProLaunch Red shaft. I've seen a few of those on eBay for a decent price. I really like the G10 head since it feels so solid when I hit it.

i agree with wrx_junki here... i've owned a 10.5* G10 with the TFC stock stiff shaft and also a 9* prolaunch red. i found the head to be relatively high launching, which is why i went with the lower trajectory shaft. the combo is a pretty solid one if you're looking to move your ball flight a bit lower.

Driver: G10 9* Matrix Ozik XCON6
Woods: i15 15.5*S UST Mamiya Axivcore Tour Red
Hybrids: i15 23*S UST Mamiya Axivcore Tour Red; i15 23* UST Mamiya Axivcore Tour Red
Irons: S57 5-PW DG S300
Wedges: Vintage Tour 52*; :eidolon: 56* & 60*Putter: Studio Select Newport 2


  • 2 years later...
Posted

I just gought a Ping G10 Driver 10.5 degree loft from 3ballsgolf on ebay(a great seller by the way, Got it used for 52.00 and it is in great condition). I also bouoght a set of Ping ISI - K irons blue dot with original jk steel shafts(paid 159.00 for 3- sw). I can't wait to use them next week. What are your thoughts on the irons? I plan to uppade to the G10 irons this Spring and wonder if I should go with the steel or graphite shatfs. Your thoughts please. I have never used Ping clubs before but from what iv'e read and also heard they are awesome!


Note: This thread is 5124 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.