Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5913 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
This is a question that I have to the knowledgeable guys on this forum about spine angle\hand placement\ and head postion at address.

What is the correct way to setup with the correct spine tilt, and could you explain in 3rd person how I should have my head(tilted with my spine or level with the ground)? This is like many guys out there a habit that I've developed and never noticed until a long time friend and very good golfer told me to work on. I guess what I am doing is holding my hands behind the ball and creating an uppercase Y instead of a proper lowercase y. Basically the sensation is new to me because Ive been addressing the ball like this for so long and I think the reason I have developed this bad habbit is because I never used to hit my long irons high enough so this is like a compensation effect. So if someone could elaborate on what the proper way to tilt my spine without feeling like all my weight is on my trail leg that would be helpful. Btw I have watched swingvision and I guess I cant put the pieces together on how the pros setup and translate that into the way I should setup.
Thanks in advance
Driver Tit 907D2 9.5 aldila spec grid 67s
HybidTit 585H 19* s flex
IronsTit 775cb 3-pw
WedgesTit vokey 52* 56* 60*
Putter Rife Barbados 35" winn mid pistol gripGolfballBridgestone B330-s/taylormade tp black/titleist prov1x

Posted
The correct way to address the ball would be to stand straight up and down, squat just a little with the knees, and then bend at the waste. Your hands should fall comfortably in front of you. When you actually grip the golf club, you will want your hands slightly in front of the ball (just in front of your zipper). You do not want to hang your head at address either. Your weight should be on the balls of your feet. You don't want to feel like you're on your toes, but also not on your heels; if that makes sense.

MP-37s 2-PW (S-300 shafts)
R5 Dual 7.5* (VistaPro 70 S)
Original Steelhead 3 wood (VistaPro 80 S)
56* MP "T" Series Black Nickel
52* MP Series Raw Black Oxide Scotty Cameron Studio Stainless Newport 2 Pro V1 X


Posted
Thanks for the tip but thats not what I am asking, please reread the questions and if I should explain my problem with more detail please let me know?Thanks man.
Driver Tit 907D2 9.5 aldila spec grid 67s
HybidTit 585H 19* s flex
IronsTit 775cb 3-pw
WedgesTit vokey 52* 56* 60*
Putter Rife Barbados 35" winn mid pistol gripGolfballBridgestone B330-s/taylormade tp black/titleist prov1x

Posted
Yeah, apparently I'm not reading the question correctly. I'm understanding it as you want to know the correct way to address the ball. Please let me know exactly what you're asking so I can help haha.

MP-37s 2-PW (S-300 shafts)
R5 Dual 7.5* (VistaPro 70 S)
Original Steelhead 3 wood (VistaPro 80 S)
56* MP "T" Series Black Nickel
52* MP Series Raw Black Oxide Scotty Cameron Studio Stainless Newport 2 Pro V1 X


Posted
Yeah, apparently I'm not reading the question correctly. I'm understanding it as you want to know the correct way to address the ball. Please let me know exactly what you're asking so I can help haha.

What I am trying to ask I guess is how should you tilt your spine in regaurds to feeling like your weight is not over your back foot. Basically I have always setup "over" the ball and not with my head a little behind....The attachment picture shows the correct way to setup with spine tilt. Maybe I should take some pic of me and upload so I can show you guys what I am doing wrong lol

Driver Tit 907D2 9.5 aldila spec grid 67s
HybidTit 585H 19* s flex
IronsTit 775cb 3-pw
WedgesTit vokey 52* 56* 60*
Putter Rife Barbados 35" winn mid pistol gripGolfballBridgestone B330-s/taylormade tp black/titleist prov1x

Posted
What I am trying to ask I guess is how should you tilt your spine in regaurds to feeling like your weight is not over your back foot. Basically I have always setup "over" the ball and not with my head a little behind....The attachment picture shows the correct way to setup with spine tilt. Maybe I should take some pic of me and upload so I can show you guys what I am doing wrong lol

Actually - though the setup in the photo is "ok" it is not ideal and I would not have you copy that one. The best way to think about the spine tilt at address is that you must simply have your upper center (center of sternum) directly above your lower center (belt buckle). The shoulders should be on somewhere b/w 5 deg. and 10 deg. of tilt (this will look minimal to the eye) and that is only because the trail hand is slightly lower on the club than the lead hand. As far as the head position this is IMPORTANT - the neck should be on the same angle as the spine as it relates to the tilt described above - but when viewed from down the line I would want you to have your neck somewhat "flexed" forward. Do not get caught up in having your chin up so you can "turn your shoulder under it" (goes into the classic advice we should not listen to list). We see best using central vision and to make use of that in the golf motion the head must be chin down to some extent through the flexion in the neck. Hope this helps.

Dave

David Wedzik
Director of Instruction, Golf Evolution

LOWEST SCORE WINS! <- Check it out!!!

   

Awards, Achievements, and Accolades

Posted
I would say tilt your head back with the angle of your spine. I believe the body has a tendancy to orient itself based on what the eyes are telling it. In other words if your set up properly with the correct spine tilt at address, yet your head is straight up and down, during the swing your back/spine will have a tendancy to want to straighten up. This can cause a lot of excess movement that will lead to ball striking problems.

Try setting up 70% Left Foot 30% Right Foot, yet keeping your head behind the ball. Many people (I believe) get confused with the term spine "tilt", and they end up leaning back of their right foot at address.

-Beane

Posted
What I am trying to ask I guess is how should you tilt your spine in regaurds to feeling like your weight is not over your back foot. Basically I have always setup "over" the ball and not with my head a little behind....The attachment picture shows the correct way to setup with spine tilt. Maybe I should take some pic of me and upload so I can show you guys what I am doing wrong lol

Oh ok I see what you're asking. The answer that David gave is spot on. You do not want to dip your head because it will cause extra movement in your swing (your body will need to reposition itself because your head will be in the way). Don't do any leaning to one side or the other because that could cause a sway instead of a turn as well.

MP-37s 2-PW (S-300 shafts)
R5 Dual 7.5* (VistaPro 70 S)
Original Steelhead 3 wood (VistaPro 80 S)
56* MP "T" Series Black Nickel
52* MP Series Raw Black Oxide Scotty Cameron Studio Stainless Newport 2 Pro V1 X


Posted
Your weight should be on the balls of your feet. You don't want to feel like you're on your toes, but also not on your heels; if that makes sense.

I think a better description is weight on the arches of your foot. "Balls of your feet" often makes people think of an infielder or defensive back position. You're anticipating a sudden burst forward.

This can cause all kinds of problems in golf. I struggled with consistency a long time because of this. What was happening was that during my downswing, I was actually falling towards the ball. The only way to keep balance was to quickly rotate my arms back to the left. This caused many shanks and off center hits. My instructor recognized this and had me start putting more weight towards the center of my feet so that I felt more "grounded". If there was ever an instruction tip that helped me more, this was it.

Kevin

-------
In the Bag
Driver: G15 9.0*3 & 5 Wood: BurnerHybrid: Pro Gold 20*; 23*Irons: MP-58 (5-PW)Wedges: Vokey Spin Milled 52*8; 56*14Putter: Newport 2.0 33"Balls: NXT


Posted
I think a better description is weight on the arches of your foot. "Balls of your feet" often makes people think of an infielder or defensive back position. You're anticipating a sudden burst forward.

By balls of your feet, I was more trying to get the point of not having the weight on your toes or heels. It's important to stand correctly as you do not want to be flat footed and by saying arches, it can come across as standing flat footed, which is not what you want to do.

MP-37s 2-PW (S-300 shafts)
R5 Dual 7.5* (VistaPro 70 S)
Original Steelhead 3 wood (VistaPro 80 S)
56* MP "T" Series Black Nickel
52* MP Series Raw Black Oxide Scotty Cameron Studio Stainless Newport 2 Pro V1 X


Posted
Thanks guys the replys above have been extremely helpful! To david when you say that the correct spine tilt will look minimal to the eye, well I guess this is what I have always emulated so maybe I shouldnt change that part lol.
Driver Tit 907D2 9.5 aldila spec grid 67s
HybidTit 585H 19* s flex
IronsTit 775cb 3-pw
WedgesTit vokey 52* 56* 60*
Putter Rife Barbados 35" winn mid pistol gripGolfballBridgestone B330-s/taylormade tp black/titleist prov1x

Note: This thread is 5913 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Nah, man. People have been testing clubs like this for decades at this point. Even 35 years. @M2R, are you AskGolfNut? If you're not, you seem to have fully bought into the cult or something. So many links to so many videos… Here's an issue, too: - A drop of 0.06 is a drop with a 90 MPH 7I having a ball speed of 117 and dropping it to 111.6, which is going to be nearly 15 yards, which is far more than what a "3% distance loss" indicates (and is even more than a 4.6% distance loss). - You're okay using a percentage with small numbers and saying "they're close" and "1.3 to 1.24 is only 4.6%," but then you excuse the massive 53% difference that going from 3% to 4.6% represents. That's a hell of an error! - That guy in the Elite video is swinging his 7I at 70 MPH. C'mon. My 5' tall daughter swings hers faster than that.
    • Yea but that is sort of my quandary, I sometimes see posts where people causally say this club is more forgiving, a little more forgiving, less forgiving, ad nauseum. But what the heck are they really quantifying? The proclamation of something as fact is not authoritative, even less so as I don't know what the basis for that statement is. For my entire golfing experience, I thought of forgiveness as how much distance front to back is lost hitting the face in non-optimal locations. Anything right or left is on me and delivery issues. But I also have to clarify that my experience is only with irons, I never got to the point of having any confidence or consistency with anything longer. I feel that is rather the point, as much as possible, to quantify the losses by trying to eliminate all the variables except the one you want to investigate. Or, I feel like we agree. Compared to the variables introduced by a golfer's delivery and the variables introduced by lie conditions, the losses from missing the optimal strike location might be so small as to almost be noise over a larger area than a pea.  In which case it seems that your objection is that the 0-3% area is being depicted as too large. Which I will address below. For statements that is absurd and true 100% sweet spot is tiny for all clubs. You will need to provide some objective data to back that up and also define what true 100% sweet spot is. If you mean the area where there are 0 losses, then yes. While true, I do not feel like a not practical or useful definition for what I would like to know. For strikes on irons away from the optimal location "in measurable and quantifiable results how many yards, or feet, does that translate into?"   In my opinion it ok to be dubious but I feel like we need people attempting this sort of data driven investigation. Even if they are wrong in some things at least they are moving the discussion forward. And he has been changing the maps and the way data is interpreted along the way. So, he admits to some of the ideas he started with as being wrong. It is not like we all have not been in that situation 😄 And in any case to proceed forward I feel will require supporting or refuting data. To which as I stated above, I do not have any experience in drivers so I cannot comment on that. But I would like to comment on irons as far as these heat maps. In a video by Elite Performance Golf Studios - The TRUTH About Forgiveness! Game Improvement vs Blade vs Players Distance SLOW SWING SPEED! and going back to ~12:50 will show the reference data for the Pro 241. I can use that to check AskGolfNut's heat map for the Pro 241: a 16mm heel, 5mm low produced a loss of efficiency from 1.3 down to 1.24 or ~4.6%. Looking at AskGolfNut's heatmap it predicts a loss of 3%. Is that good or bad? I do not know but given the possible variations I am going to say it is ok. That location is very close to where the head map goes to 4%, these are very small numbers, and rounding could be playing some part. But for sure I am going to say it is not absurd. Looking at one data point is absurd, but I am not going to spend time on more because IME people who are interested will do their own research and those not interested cannot be persuaded by any amount of data. However, the overall conclusion that I got from that video was that between the three clubs there is a difference in distance forgiveness, but it is not very much. Without some robot testing or something similar the human element in the testing makes it difficult to say is it 1 yard, or 2, or 3?  
    • Wordle 1,668 3/6 🟨🟨🟩⬜⬜ ⬜🟨⬜⬜🟨 🟩🟩🟩🟩🟩
    • Wordle 1,668 3/6 🟨🟩🟨🟨⬜ 🟩🟩🟩🟩⬜ 🟩🟩🟩🟩🟩 Should have got it in two, but I have music on my brain.
    • Wordle 1,668 2/6* 🟨🟨🟩⬛⬛ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.