Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5913 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Recieved these as a Christmas gift.

A last minute plan came together for an early round with some buds tomorrow and don't have time to start
at my favorite golf shop prior.

Gonna game these monsters....curious as to your opinions. Greens are fairly wet and soft so full shots will check. Chipping may
be tricky.

909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
IMO, this time of year you want a soft, cheap, distance ball cuz you can stick greens with a 3i and spin on the green isn't a big deal this time of year.

I really like the Bridgestone e6+, but b/c they have gone up in price so its probably back to the power drive by precept for me. I don't know if they make the Laddie anymore, but that was a good winter ball.

Posted
I've seen Laddies still selling for 24/$19. I agree that it's a great value.

It's going to be low 40's at tee off this morning....Freaks may feel like rocks...we'll see.

I may be in luck as I found a sleeve of 330RX in the bottom of my bag.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
The Freak is a decent ball. I might be kind of hard under these conditions, I don't know?

So how'd your round go? Where'd you play? I tried to play this morning (10AM), but it started raining on the 6th green and after the ninth I stopped. I don't have any rain gear so playing even in light rain is something I really don't like (espcially since I always walk the Patch). I need to get some decent gear, but it's so darn expensive!

Nike Vapor Speed driver 12* stock regular shaft
Nike Machspeed 4W 17*, 7W 21* stock stiff shafts
Ping i10 irons 4-9, PW, UW, SW, LW AWT stiff flex
Titleist SC Kombi 35"; Srixon Z Star XV tour yellow

Clicgear 3.0; Sun Mountain Four 5


Posted
I am sans raingear as well. Sure could have used it today.

We played Midland Valley.
($20 with coupons!!!!!).
Teed off around 10:00am, also. Rain was off and on on the front and steady on the back.

We all shot fairly poorly but had fun. My highlight was a nice 4H approach on the last par 5. I lipped out my eagle attempt. It was the only birdie for the day within the group.

The greens rolled as smooth and true as I've ever seen at the Valley. Speeds were fast, even when wet. There was no excuse for my poor putting.

The Freak did very well. Pulled two out of the first sleeve at the beginning of the round and rotated them on holes. Same two balls went right back in that sleeve after walking off 18th green. Wear was not bad.

Freaks putted well...checked just fine on full shots, bunker blasts (had too many oportunities), lobs and chips so no objections here.

One shot that I never tried is the low hard PW that comes in hot and zips to a stop like it's Velcro covered....recovery shot from overhead trouble usually, maybe once per 2-3 rounds.

Distance was good, in fact I'd estimate 1/2 club more on 6i, 5i, 4h and woods. Interested in seeing the performance in warmer weather.

I have no hesitations gaming this dozen until they are all lost...may buy some, too.


Cheif, are you playing anywhere tomorrow or next Thursday? I'm going to try somewhere both days. We should hook up.

My game is rusty but I'm enjoying being back in it. Missed the game dearly these past 4 months.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Note: This thread is 5913 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.