Jump to content
Subscribe to the Spin Axis Podcast! ×
Note: This thread is 5214 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted


  sean_miller said:
Originally Posted by sean_miller

Does that drill promote a flip? Looks good until the moment of truth (impact) then flippage. j/k - hard to tell from DTL.



lol, I dont think its the drill if I was flipping. I was more concerned about how my face angle looks a little closed at the top. But really though, this drill has helped put my swing together. I was hitting all tiny draws today without manipulating the face at all, it was nice- Im use to hitting pushes from coming off the wall, it just throws off my swing plane.

ps. I was going to include a video on here of that dome session I had today if it wasnt for that pro. That indoor dome was sweet, they use yellow balls so you can see the flight against the white dome, would of been cool to see on video


  • Replies 119
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Just a quick word.   The chair should be angled at a forty five.  The part near the target should be away from your butt.....  \\\\\\\\                      The way you have it you limit the depth of your turn and give no room for the arms to work.  You are stuck and your right hip is in the way on the downswing..


Posted


  proguy747 said:
Originally Posted by proguy747

Just a quick word.   The chair should be angled at a forty five.  The part near the target should be away from your butt.....  \\\\\\\\                      The way you have it you limit the depth of your turn and give no room for the arms to work.  You are stuck and your right hip is in the way on the downswing..



Not sure if I totally agree with that. Your suggesting that on the butt line, your suppose to cross it on the downswing through impact and finish. I agree with maybe crossing it a bit at the finish but not impact. Here's a video of Mike Bennett doing the same drill.


Posted

Mott.    Check out hogan in this video.     Pause it right away, grab a pen and hold the tip of the pen at the back of the right buttock.  Press play.  Do you notice the pen ends up in the middle of the right hip at the top?   Then watch the downswing. Notice his left hip then clears way left of the starting line.  This is why you want the chair on a 45. \ Golfer . Ball Understand my diagram?  That view is looking down on the golfer if you were god.     This is a good drill to learn the depth  required  to have room for your arms to swing properly.  The right buttock does move toward the target like the videos above show but the key element they are missing is that the right buttock moves back and then toward the target.  This happens because the weight moves toward the right heel right away.  Then during the transition the left knee, left hip, and left shoulder turn away from the center clearing left in that order.    The footwork should feel as though both feet should roll toward the target and the weight then moving quickly into to the left heel.  you will notice hogans left big toe is up early in the downswing.   This tells you his weight is in the left heel.

Forgot to mention that this camera ngle is slightly behind him so it would show up even more from directly behind.

http://www.youtube.com/watch?v=Fsl7aozegEM&feature;=related


Posted


  proguy747 said:
Originally Posted by proguy747

Mott.    Check out hogan in this video.     Pause it right away, grab a pen and hold the tip of the pen at the back of the right buttock.  Press play.  Do you notice the pen ends up in the middle of the right hip at the top?   Then watch the downswing. Notice his left hip then clears way left of the starting line.  This is why you want the chair on a 45.                \ Golfer . Ball             Understand my diagram?  That view is looking down on the golfer if you were god.     This is a good drill to learn the depth  required  to have room for your arms to swing properly.  The right buttock does move toward the target like the videos above show but the key element they are missing is that the right buttock moves back and then toward the target.  This happens because the weight moves toward the right heel right away.  Then during the transition the left knee, left hip, and left shoulder turn away from the center clearing left in that order.    The footwork should feel as though both feet should roll toward the target and the weight then moving quickly into to the left heel.  you will notice hogans left big toe is up early in the downswing.   This tells you his weight is in the left heel.

Forgot to mention that this camera ngle is slightly behind him so it would show up even more from directly behind.

http://www.youtube.com/watch?v=Fsl7aozegEM&feature;=related



I put a pin on the back of his right buttock and he didnt cross that pin the entire swing. Did it on the first swing on the video

I did notice how much S&T; and Foleys swing methods are modeled after Ben Hogans swing. Mike and Andy should of made a name that was related to Ben Hogan for the swing if they had to make a name, Like the Hogan method or something.


Posted


  motteler621 said:
Originally Posted by motteler621

I put a pin on the back of his right buttock and he didnt cross that pin the entire swing. Did it on the first swing on the video

I did notice how much S&T; and Foleys swing methods are modeled after Ben Hogans swing. Mike and Andy should of made a name that was related to Ben Hogan for the swing if they had to make a name, Like the Hogan method or something.



If that is what you believe, good luck with your swing. Because I cannot help someone that denies the obvious.   By the way ST and tilt is based of of Morad and macs low flying wedge.


Posted


  proguy747 said:
Originally Posted by proguy747

sorry I am not qualified to teach the blind.  Good luck



I know what your saying, but just not sure if I totally agree with it. To me people spin with their hips to much. I think a good way to do the drill is how clement and bennett are doing it.


Posted


  proguy747 said:
Originally Posted by proguy747

Mott.    Check out hogan in this video.     Pause it right away, grab a pen and hold the tip of the pen at the back of the right buttock.  Press play.  Do you notice the pen ends up in the middle of the right hip at the top?   Then watch the downswing. Notice his left hip then clears way left of the starting line.  This is why you want the chair on a 45.                \ Golfer . Ball             Understand my diagram?  That view is looking down on the golfer if you were god.     This is a good drill to learn the depth  required  to have room for your arms to swing properly.  The right buttock does move toward the target like the videos above show but the key element they are missing is that the right buttock moves back and then toward the target.  This happens because the weight moves toward the right heel right away.  Then during the transition the left knee, left hip, and left shoulder turn away from the center clearing left in that order.    The footwork should feel as though both feet should roll toward the target and the weight then moving quickly into to the left heel.  you will notice hogans left big toe is up early in the downswing.   This tells you his weight is in the left heel.

Forgot to mention that this camera ngle is slightly behind him so it would show up even more from directly behind.

http://www.youtube.com/watch?v=Fsl7aozegEM&feature;=related



btw, I was looking at this a little more. The camera is a little shaky but with a pin tip Hogan does more his right hip slightly further back than the original buttocks line on the backswing, I do this too in my swing. he then brings his left hip to that new line slides and finishes on that same new line. So it looks like the line moves back slightly and stays there. Not sure if I would want the chair at 45 degrees but just dont put your butt so close to the chair at address so you have room to bring the right hip back further and slide on that line. Of course your hips are going to open up on the downswing keeping the center of your hip in the same spot.

Anyone else want to comment on this? should it be at 45 degree angle?


  • 4 weeks later...
Note: This thread is 5214 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Jesus, when he keeps saying scissoring moment, ugh that is a horrible sounding phrase. Just makes me cringe. It doesn't help my mind went to Mr. Garrison from South Park. 🤣 If you know you know.  I think for the most part, golf shaft companies have gotten this figured out. They ask questions like, what tempo do you swing at. The whole scissor terminology sounds like they want to stand out a bit.  Yea, golfers load the golf shaft differently, and different bend profiles can help out. I do think swing speed matters as well. You probably want a golf shaft with lower torque if you swing faster. 
    • Played 9 holes, shot a 39.  Kind of got around. Everything between the trees, so in play. Short game was rusty. Got to get back on that. Greens were stupidly slow because they got a lot of rain yesterday and probably couldn't cut them down. Usually in the summer they are firm and pretty fast for how sloped they are. Got to work on face to path a bit. 
    • We agree here. Top of the car has a forward force, bottom of the car experiences a backward force via the braking. Both about the COM (somewhere in between). Result is a rotational flip. Since the forward force is still higher the car probably still globally travels forward. Sure, pretty basic. You really think there are deliberate twist forces applied? Like forcing the club head forward and simultaneously forcing grip end in the opposite direction? Heck I don't think we even slow down the grip end deliberately let alone force it the other way. Sorry, if I am missing something here. The orientation change is simple incidental because there is different rate of global movement of grip vs. clubhead throughout the swing. I also happen to think the best swings have the least amount of differential movement between the two end in the impact zone.  In my defense, I never thought one could do justice in covering all aspects of a golf swing in a paragraphs or two to begin with. Especially not with grade school physics..😜 Okay.
    • Wow, @DeadMan that is such a helpful breakdown of what’s around. Really excited to check a bunch of these out. Thank you. Will definitely go to Walnut Creek. Will also try and get a commonground tee time. Haven’t played many Doak courses yet! If your schedule frees up, let me know! 
    • Yeah. I'm not sure what Vishal is really talking about with the "constrained" COM. The club's COM doesn't really change much. Less than the body's does… We definitely apply force to the golf club to move it both translationally (linear force) and rotationally (torque) to the golf club. That's what Manzella's alpha/beta/gamma is all about. Even before they switched the reference frame from the global to the club-based one. 😉 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...