Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5791 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Your explanation makes a lot of sense. It's easy to imagine that I'll chunk a shot, if I straighten my right arm or if I don't hold the right wrist hinge before impact.

your posture and stance look good to me. i wouldn't straighten my knees any more than they are already. everything looks great, it's just a matter of getting the feeling of not straightening your right arm until after the swing, which is hard to do at first. but what i try to do is lead the downswing with my right elbow and pull it in front of my body and through the shot.


Posted
your posture and stance look good to me. i wouldn't straighten my knees any more than they are already. everything looks great, it's just a matter of getting the feeling of not straightening your right arm until after the swing, which is hard to do at first. but what i try to do is lead the downswing with my right elbow and pull it in front of my body and through the shot.

Ok. I tried the narrower + closer to ball stance today at a golf course.

Chunked SW 4 times inside 100 yards. Chunked 7 iron twice from the fairways. Shot 84. Should I continue with the new stance?

My Clubs
Driver - Nike SUMO 13* R flex
Wood - Cobra 5 wood 18* R flex
3-PW hybrids/irons - Mizuno MX-950 R flex
Wedge - Mizuno MX-950 51* Wedge - Cleveland CG14 56* 14*Putter - RifeBall - Taylormade TP LDP RED


Posted
Ok. I tried the narrower + closer to ball stance today at a golf course.

well, whatever you want to do. when you hit a good iron shot, do you feel you've got more control with the new stance or the old one? if you've got more with the new then i'd keep it and work on keeping my hands moving forward through the hitting area so you don't chunk it. but if you've got more with the old stance then by all means go back to that. personally, i find it easier to control the ball and have a better trajectory with a narrower, closer stance. but it's all up to you.


Posted
well, whatever you want to do. when you hit a good iron shot, do you feel you've got more control with the new stance or the old one? if you've got more with the new then i'd keep it and work on keeping my hands moving forward through the hitting area so you don't chunk it. but if you've got more with the old stance then by all means go back to that. personally, i find it easier to control the ball and have a better trajectory with a narrower, closer stance. but it's all up to you.

There are several things that I like with narrower closer stance.

1. Less in-out swing. Less hook trajectory. As a matter of fact, I hit all 4 par 3s GIR. The flight trajectory was straight and where I aimed. But they were all teed up. Off the deck, most iron shots are still draws. 2. I feel my arms are more passive at impact than before. There's only 1 thing that I don't like with the new stance. 1. Steeper angle of attack resulting in chunk shots. This is a weird combination of in-out swing + steep angle. I know this is my fault. But need to address this. Overall, I like the new stance and I think it's necessary to get to the next level. So I don't mind struggling for several weeks on the course. So is this correct? Maintaining flying wedge = flatter angle of attack?

My Clubs
Driver - Nike SUMO 13* R flex
Wood - Cobra 5 wood 18* R flex
3-PW hybrids/irons - Mizuno MX-950 R flex
Wedge - Mizuno MX-950 51* Wedge - Cleveland CG14 56* 14*Putter - RifeBall - Taylormade TP LDP RED


Posted

there's not really a ''flatter'' angle of attack per se. the flying wedge should stay intact no matter what angle of attack with which you strike the ball. i wasn't going to say this earlier cause i didn't want to say too much, but in your downswing you come very far to the inside. i recommend staying on the same ''plane'' for lack of a better term in the downswing. if you look at your swing. you take the club basically straight back, but in the downswing you come from pretty far inside. i think if you came straight back and straight through while maintaining the flying wedge, you'll have a really good stroke. i try to feel like my hands come right over my right shoulder, then back down in front of my body thus preventing me from getting stuck and hooking/pushing the ball.

if you notice davis brings his hands, just like all other pros, above his shoulder then right back down the line and not inside to out. it takes a little while to get used to, but i truly think it would do you well in the long run. so i'd say keep the narrower/closer stance, and try to swing straight back, and straight through at the target.


Posted
senorchipotle,

Once again, thanks.

I have been practicing this narrower closer to ball stance for the last 4 days. I have struggled a lot initially but I think it's coming around.

9 GIRs today. Only 2 hook and 1 slice tee shots. No hook iron shots. I hit 3 pure iron shots, when normally I would hit 1 pure, if I'm lucky. Love that sweet feeling. It's like a bliss!

More importantly, I feel my swing is much smoother and effortless than before. I'll keep working at it.

My Clubs
Driver - Nike SUMO 13* R flex
Wood - Cobra 5 wood 18* R flex
3-PW hybrids/irons - Mizuno MX-950 R flex
Wedge - Mizuno MX-950 51* Wedge - Cleveland CG14 56* 14*Putter - RifeBall - Taylormade TP LDP RED


Note: This thread is 5791 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.