Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5369 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

[quote name="Gerald" url="/forum/thread/38490/should-i-match-my-3-wood-to-my-driver#post_502288"]

None

I've had both F2/F3 but I am more of an iron man ..... The deeper face and smaller head of the F3 makes it easier or better from the tee, more difficult trough the fairway, while the F2 is better through the faiway, but harder to hit from the tee..... it is just a matter of the purpose you have for the 3W. The F2 longer face gives some extra confidence to most users.[/quote] I'm a HUGE fan of the 909 series, especially the F3. I like the 909's enough that I don't even have any plans to try out the 910's. I really like the lower trajectory that the F3 delivers (vs the F2). If you're a high ball hitter, an F3 w/a low launching shaft is an ideal fairway wood. Going with a 3 wood from the same series as your driver is a decent starting point, if it delivers what you're looking for in a fairway wood that is. The R9 fairway wood has a pretty shallow/long face and that doesn't work for me so, even if I gamed an R9 driver, I doubt that I'd give much serious consideration to a fairway wood from the same line. Worry more about what a given club delivers based on your needs and stick with that. In the end, it doesn't really matter what's stamped on the sole-plate if the stick works for you.

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


Posted

After having had both the F2 and F3 in the bag for a few months, I liked the F2 better bc. (even at the 13.5 model I am using) it is easier of the fairway ....... the last thing I would want is a low flight from the fairway, it gets up fast and really flies a longggggg way.

In the 910 series the F2 is marketed toward fairway use and the FD (F3) is marketed towards of the tee use ......... I feel that is what equals the 909 F2/F3.

Cal Razr Hawk 10.5 | TM Superfast 3W | Adams Idea Pro Black 20 | MP-68 3-PW | TW9 50/06 + 58/12 | Ram Zebra Putter


Posted

Great question by the way!!!

When I first started playing and buying clubs I thought I needed to have my woods match, but as I developed as a player I realized it wasn't a necessity. It is more important to have clubs that work and feel good than clubs that look good. I now play the Ping G15 driver and I had originally bought the G15 3 wood, but I hated it! I wound up getting…. brace yourself…. The Nike SQ MachSpeed 3 wood, which is probably the most unlikely club to put in my bag based on its looks (square head, etc…) but it comes stock with the shaft that I like and I can hit the $&!# out of it! Oddly enough I play a Ping i15 5 wood. The i15 I was told was a "players" club and would not work for me. But I can rip this thing! Plus it also comes stock with the shaft that I like, so its in the bag, and been there for almost a year now.

Bottom line is: Be open minded, and put what works best in your bag, not what looks best…

In my Ogio bag.

Titleist 910D2 driver, Adams irons & hybrid, Callaway wedges & a Nike Method putter.

And a yellow ball.
 

 

The great irony of life: "If nobody gets out alive, what's holding you back!?"


Posted
In my opinion 3 woods are the hardest club to find one that will work for you. Unlike the driver your 3 wood needs to be hit out of verious lies. I just try to find one that works for me.

In the Bag:
Driver:Adams Speedline F11 9 degree RIP Gamma 

3 Wood: Adams Fast 10 15 degrees Voodoo shaft
Hybrid: Irons: Mizuno MP59 Sensicore  XStiff

Wedges: Cleveland Gun Metal 52 56 degree

Putter: Rife: Belly Barbados Tropical

Ball: Titliest Pro V 1


Note: This thread is 5369 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 35 (6 Jan 26) - Got opportunity to play today, opted to mix it up - pulled Driver, 3w and 4h, keeping 7w, 5-Pw, 50 and 55 wedges and putter.  Played a set of tees up as well - goal: focus on the irons, especially the scoring clubs.  Had one of the sessions in a while (3 over 39 front, 6 over 42 back (a couple late round poor shot choices)).  Had a blast working a 10 club setup…
    • Day 17 - 2026-01-06 Mix of mat and net work, same focus on trail side and hands. Mirror work again later in the day.
    • Hi all. I have sought permission from admin to post this here. First, here's a quick link to my products on TST, which a few of the mods have been road-testing...  Most of you would be aware of the import tariffs imposed on importers to the US circa September last year. Prior to their introduction, I was selling a decent number each week into the 'States. Since the tariffs came in - which added ~AU$60 to the total cost of getting them over there - sales have dropped to virtually nil. I think fear of the tariffs is the biggest part rather than the actual cost increase, despite me declaring everywhere on my site that we pay the tariffs and have successfully got every order into the US without any problems since. What is still unknown to most US consumers is that these tariffs will DOUBLE in February as Australia Post will no longer be allowed to offer "private" rates, they all change to "commercial". I do indeed think that this will make the products uncompetitive to ship there. So what's the backstory?  I'm a small Aussie business, not some corporate juggernaut. I invented these products - not a reseller for someone else. The import tariffs double in February, so add another ~15% to the total cost. If you want StanceMate alone I can do a super deal on a run-out model PREVIEW HERE (note you cannot purchase this yet. I think the shipped price will be about AU$110 inc Shipping (tariffs included). If you want to reduce the cost of the whole Stryper Plus Bundle I can swap the runout StanceMate to reduce the overall price by AU$60. These work EXACTLY as the newer version, just not as premium quality in the way the finish is achievbed in production) IMPORTANT: All import tariffs are PRE-PAID at my end, and clears customs no problem. I've sent a half dozen since October with every one delivered. NB: I'm not here to get into the politics of the decisions on tariffs, so let's not go down that road. It is what it is! So StanceMate to your door in US - tariffs prepaid - about US$70 Bundle to your door in US - tariffs prepaid - US$240 Bundle (with version 1 StanceMate) to your door in US - tariffs prepaid - US$200 Cheers Corbs
    • Wordle 1,662 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,662 4/6 ⬜⬜⬜⬜⬜ 🟨🟩⬜⬜⬜ 🟨🟩⬜🟩⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.