Looking for Taylormade R7 #7 iron (lost mine)

[TheDre]

Hi all,

I recently lost the 7 iron from my Taylormade R7 set. I just figured I'd post in case I'm lucky enough someone has one lying around they would sell.

Thanks!

Dre

[teamgs]

Have you checked out this site?: http://www.ironfinder.com/Individual...made/r7-06.htm

What about ebay?

Good Luck!

Gary

[NativeTxn]

Might also try: http://www.clubfinders.com/index.shtml

[rjwiggall]

Here's one example of what's on ebay

http://cgi.ebay.com/TaylorMade-R7-7-...?pt=Golf_Clubs

Good luck!

[TheDre]

Thanks for the help! I did find one from ClubFinders but it has a stiff shaft and I use regular. I don't use the 4 iron from my set. Is it possible to bring it to my local Golf Town and have them cut the shaft to the correct lenght for a 7 iron and use that on the 7 iron instead of the stiff shaft or buying another shaft?

[tristanhilton85]

Thanks for the help! I did find one from ClubFinders but it has a stiff shaft and I use regular. I don't use the 4 iron from my set. Is it possible to bring it to my local Golf Town and have them cut the shaft to the correct lenght for a 7 iron and use that on the 7 iron instead of the stiff shaft or buying another shaft?

No. To start, the loft would be way off. As an example, my 4i is 23* and my 7i is 34*; there is no way you could bend the club 11*. Also the weighting of the club would be way off. You are much better off just buying one off of clubfinders, eBay, etc. and if it is the wrong flex, having it reshafted.

[TheDre]

Sorry but I didnt explain correctly. I want to buy the 7i with stiff shaft but then take the shaft off my 4i since its reg flex and have it cut to the right size and put the 7i head on it. I would scrap the stiff shaft and 4i head. Are all shafts the same but simply cut down depending on the iron?

[tristanhilton85]

Sorry I didn't understand at first... I think that cutting the shaft of the 4 iron that much would change the stiffness, making it stiffer, but I'm not 100% on that. Depending on what shaft it is, however, it shouldn't be too expensive to just buy a new one.