Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

Removing Paint Fill

wrx_junki

By wrx_junki
in Clubs, Grips, Shafts, Fitting

 Share
Note: This thread is 5534 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

wrx_junki Great Member

wrx_junki

Posted
Posted
To those who have done this, what method do you think is the best? I want to remove the paint fill in my Nike VR split cavities during the off season to have a cleaner look.

« Keith »


alomar123 Dedicated Member

alomar123

Posted
Posted
Acetone will work, I depending on the project use a rag, q-tip, or soak it in a bowl of it.

OHIO

In my Revolver Bag
R9 460, RIP
R9 TP 3 Wood, Diamana 'ilima 70*Idea Pro Black 20*Titleist AP1 712 4-AW Spin Milled Black Nickel 56.08 & 60.10


billysandy Dedicated Member

billysandy

Posted
Posted
Acetone will work, I depending on the project use a rag, q-tip, or soak it in a bowl of it.

Sounds about right to me. Use a toothpick, or a sharp point on a utility knife to scratch it out after you have applied some acetone with a 'q tip' or 'earbuds' as we call them here in the UK. Can't get hold of regular acetone? Use nail polish remover, acetone is the primary ingredient.

What I Play:
Wilson Mini Stand Bag | PING G10, 10.5°, Proforce V2 HL S | PING G5, 15°, 18°, Aldila NV 75 S | PING G5, 19°, Aldila VS Proto By You 80 S
Mizuno MX200 4-PW S | Ping Tour W 50/12 X | Ping Tour W 58/TS X | A selection of putters, all 35.5 inches.

Peleus Well Established Member

Peleus

Posted
Posted
I've found the best stuff to be the extra string lacquer thinner found at Ace hardware. Either dip a toothbrush in it and then rub on the clubs itself, or pour a small bowl and soak the club heads in it for 5 or 10 minutes. Comes RIGHT off.

Ogio Nexos Black on Black

Taylormade TP R9 Superdeep, 9.5, Aldila RIP A70X

Bridgestone J38 15, Motore F1 75S

Mizuno Masters Tournament Blades

Mizuno MP-T10 60.08

Ping Anser 2i


Slappy9 Well Established Member

Slappy9

Posted
Posted
A dental pick works great if you dont want to use chemicals. You can buy it at any hardware store. Also Sharpie makes a great paint pens with different sized tips that make it alot cleaner and easier to paint fill with.

OGIO Grom Stand Bag:
Driver - Taylormade R7 Limited 9.5*
3Wood - Cleveland Hibore 15*
Hybrid - Cleveland Hibore 19*
Irons - Taylormade R7s 4-GWWedges - Cleveland CG12s Black pearl 54*/12* & 58*/8*Putter - Rife ArubaBack-ups - Karsten Anser / Odyssey White Ice #9Ball - Taylormade Burner TP & LDP...


wrx_junki Great Member

wrx_junki

Posted
  • Author
Posted
Thinking if I should remove all the paint fill in my split cavities or everything but the Nike swoosh.

« Keith »


enis750 Great Member

enis750

Posted
Posted
there is this gel type paint remover you can buy
there are a lot of different types - anyone is fine

gob it on nice and generous, let stand 20-40 mins and the paint should just peel right out
I found some clubs harder than others to strip
my Vokeys were a breeze and my B'Stone J36's took about 4 times to remove

just take your time and repeat the steps

i have tried this on all types of finishes too - chrome, satin, black pearl and oil can
the gel remover will not harm your finish in anyway
"My swing is homemade - but I have perfect flaws!" - Me

Ferg Established Member

Ferg

Posted
Posted
I just removed my paintfill last night and redid my clubs. I just put some paint thinner in a cup and grabbed a handful of q-tips. Dip the q-tip in the thinner and just start rubbing the area with the paint fill. It may take a couple of q-tips as they start to turn the color of the paint fill you are removing. It really is quite easy to do.

I have Ping G10's which have an orange back piece so I am changing the numbers on the soles to match the orange. I just take some paint (nail polish) and paint in the numbers. You don't have to be too careful. Let them sit a few minutes, then take a cloth with the thinner on it and start making swipes across it. Since the paint is down in the club stamping, the rag should remove the paint that isn't in the letters. Just make sure not to start wiping too much or you may need to try again. I'll try and take pictures tonight and post them.

In my bag
Burner 10.5* reg
3h & 4-P S57
Wedges: 56* CCI and 60* SV Tour
DF 960


wrx_junki Great Member

wrx_junki

Posted
  • Author
Posted
Acetone is good stuff. Doesn't take much effort. Just apply, let it set for a second and the paint should start to come out. I removed the paint from my Cameron and didn't need toothpicks or anything like that to chip resisting paint out.

Looks like I'll be using acetone. Just thinking if I should dump my clubs in a bucket of it or just dab the clubs with a rag. Also how do you dispose of acetone, don't really want to dump it in the toilet.

« Keith »


dbwood Well Established Member

dbwood

Posted
Posted
Don't stick your club heads in a bucket of acetone. Acetone weakens and softens epoxy, and epoxy is what holds the heads on the shafts. A little bit on a q tip will do fine.
Also be careful around your ferrules, acetone will melt them.
You can dispose of it by pouring it into a pan of some kind and putting it outside. It will evaporate in an hour or so.

wrx_junki Great Member

wrx_junki

Posted
  • Author
Posted

Used some acetone to rub off the red line in the middle of the cavity on a few of my irons and this is how it turned out.





Don't think I'll be removing the black Nike swoosh and the VR is not removable since its covered in clear polish. I'd suggest taking the red line if you have either the VR blades or split cavities. Looks much better this way IMO.

« Keith »


enis750 Great Member

enis750

Posted
Posted
much cleaner
also i think that VR badge is weighted too, so remving it will or might eff w your swingweight
"My swing is homemade - but I have perfect flaws!" - Me

motteler621 Great Member

motteler621

Posted
Posted
you can get the clear coat off on the VR sign and then the paint if u really want to. I would know I accidently did it to an old car of mine. Just take a pad that can scrub like a 3m metal polishing pad and put some nail polish on that part. scrub on it and it will come of

wrx_junki Great Member

wrx_junki

Posted
  • Author
Posted
you can get the clear coat off on the VR sign and then the paint if u really want to. I would know I accidently did it to an old car of mine. Just take a pad that can scrub like a 3m metal polishing pad and put some nail polish on that part. scrub on it and it will come of

Yeah don't really want to mess with it. I think I will keep it the way it is now.

« Keith »


motteler621 Great Member

motteler621

Posted
Posted
Yeah don't really want to mess with it. I think I will keep it the way it is now.

thats cool. I meant nail polish remover, not nail polish though, you just need something that can create some friction on the surface to sort of scrub it. Will come right off


Note: This thread is 5534 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • saevel25
      Driver and 3W Swing Weight Changes, Make Sense?

      By saevel25 · Posted

      In terms of ball striking, not really. Ball striking being how good you are at hitting the center of the clubface with the swing path you want and the loft you want to present at impact.  In terms of getting better launch conditions for the current swing you have, it is debatable.  It depends on how you swing and what your current launch conditions are at. These are fine tuning mechanisms not significant changes. They might not even be the correct fine tuning you need. I would go spend the $100 to $150 dollars in getting a club fitting over potentially wasting money on changes that ChatGPT gave you.  New grips are important. Yes, it can affect swing weight, but it is personal preference. Swing weight is just one component.  Overall weight effects the feel. The type of golf shaft effects the feel of the club in the swing. Swing weight effects the feel. You can add so much extra weight to get the swing weight correct and it will feel completely different because the total weight went up. Imagine swinging a 5lb stick versus a 15lb stick. They could be balanced the same (swing weight), but one will take substantially more effort to move.  I would almost say swing weight is an old school way of fitting clubs. Now, with launch monitors, you could just fit the golfer. You could have two golfers with the same swing speed that want completely different swing weight. It is just personal preference. You can only tell that by swinging a golf club.     
    • BananaBomber
      Driver and 3W Swing Weight Changes, Make Sense?

      By BananaBomber · Posted

      Thanks for the comments. I fully understand that these changes won't make any big difference compared to getting a flawless swing but looking to give myself the best chance of success at where I am and hopefully lessons will improve the swing along the way. Can these changes make minor improvements to ball striking and misses then that's fine. From what I understood about changing the grips, which is to avoid them slipping in warm and humid conditions, is that it will affect the swing weight since midsize are heavier than regular and so therefore adding weight to the club head would be required to avoid a change of feel in the club compared to before? 
    • saevel25
      Dr. Raymond Prior and Block vs. Random Practice (The Spin Axis Podcast)

      By saevel25 · Posted

      I think part of it is there hasn't been enough conclusive studies specific to golf regarding block studies. Maybe the full swing, you can't study it because it is too complicated and to some degree it will fall into variable or random.  
    • saevel25
      Driver and 3W Swing Weight Changes, Make Sense?

      By saevel25 · Posted

      Going one step stiffer in the golf shaft, of the same make and model will have minor impact on the launch conditions. It can matter, it is a way to dial in some launch conditions if you are a few hundred RPM off or the angle isn't there. Same with moving weights around. A clubhead weights 200-220 grams. You are shifting a fraction of that to move the CG slightly. It can matter, again its more about fine tuning. As for grip size, this is more personal preference. Grip size doesn't have any impact on the swing out of personal preference.  You are going to spend hundreds of dollars for fine tuning. Which if you want, go for it. I am not sure what your level of play is, or what your goals in golf are.  In the end, the golf swing matters more than the equipment. If you want to go to that level of detail, go find a good golf club fitter. ChatGPT is going to surface scan reddit, golfwrx, and other popular websites for the answers. Basically, it is all opinionated gibberish at this point.   
    • DeadMan
      Wordle Daily Puzzle

      By DeadMan · Posted

      Wordle 1,640 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept