Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5363 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

So my previous R9 TP driver is set to default setting and on address, the face is slightly open for me. Not because of the driver is set to open,

but it's just how I set my arms on address.

Now my new R11 TP driver is squared up on address and I'm still trying to get used to this driver.

It feels that I can hit the draw a bit easier with my older R9.

Now the questions are:

1. Do tour pros prefer a 2 degree open face driver?

2. If so, why? And if not, what do they use?

3. Since the draw is a right to left shot, is my old set up the right way to do it?

(slightly open face on address, as if I'm aiming right)

Cheers


Posted


Originally Posted by Sai-Jin

So my previous R9 TP driver is set to default setting and on address, the face is slightly open for me. Not because of the driver is set to open,

but it's just how I set my arms on address.

Now my new R11 TP driver is squared up on address and I'm still trying to get used to this driver.

It feels that I can hit the draw a bit easier with my older R9.

Now the questions are:

1. Do tour pros prefer a 2 degree open face driver?

2. If so, why? And if not, what do they use?

3. Since the draw is a right to left shot, is my old set up the right way to do it?

(slightly open face on address, as if I'm aiming right)

Cheers



1. Do tour pros prefer a 2 degree open face driver? Doesn't matter what pros use ( you've got your own swing )

2. If so, why? And if not, what do they use? As above

3. Since the draw is a right to left shot, is my old set up the right way to do it?

(slightly open face on address, as if I'm aiming right) You are right. The ball will start in the DIRECTION THE CLUB FACE IS POINTING...so to hit a draw, the clubface must be closed relative to the swing path , then you have to leave room for a draw so you have to aim the clubface to the right and then swing further to the right.

:tmade: SLDR X-Stiff 12.5°
:nike:VRS Covert 3 Wood Stiff
:nike:VRS Covert 3 Hybrid Stiff
:nike:VR Pro Combo CB 4 - PW Stiff 2° Flat
:cleveland:588RTX CB 50.10 GW
:cleveland:588RTX CB 54.10 SW
:nike:VR V-Rev 60.8 LW
:nike:Method 002 Putter


Posted

Aha... no wonder I was hitting right to left all day long with my old R9 and now with the R11, I'm either hooking or hitting it straight with a big draw.

Thanks for the confirmation.

But out of curiosity though, I still want to know if the tourpros do prefer a 2* open club driver on default and if they do, what is the reason.


Posted


Originally Posted by Sai-Jin

But out of curiosity though, I still want to know if the tourpros do prefer a 2* open club driver on default and if they do, what is the reason.


Here's my understanding of it (take from this what you will):  the big terrifying miss, especially for those who play a draw, is the over-curve (this is why I don't understand it when people claim a draw eliminates the right side of the course for a right-hander.  Are they planning on hooking everything?).

The more the face is open, the more right the ball will start relative to where the player would have started the ball with a neutral face driver .  So, this setting would give some slight more insurance against a hook (not against the ball hooking;  against where the ball ends up in event of a hook), and a huge amount of insurance against a pull hook, at the risk that the player might occasionally send one straight into the first cut on the right.

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Another hybrid in here too.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Posted

Interesting, that's really informative, thank you.

And you are right, per my experience, with my new R11, I've been hitting a lot of big curved draws after a straight ball flight plus a bit more hooks than normal.

But that's because of my square at address face. I'm gonna pull my right leg back so that my club is slightly open again as when I used my R9 and see where it goes.

Oh btw, what is a baby draw?


Posted


Originally Posted by Sai-Jin

Interesting, that's really informative, thank you.

And you are right, per my experience, with my new R11, I've been hitting a lot of big curved draws after a straight ball flight plus a bit more hooks than normal.

But that's because of my square at address face. I'm gonna pull my right leg back so that my club is slightly open again as when I used my R9 and see where it goes.

Oh btw, what is a baby draw?



A very small draw

:tmade: SLDR X-Stiff 12.5°
:nike:VRS Covert 3 Wood Stiff
:nike:VRS Covert 3 Hybrid Stiff
:nike:VR Pro Combo CB 4 - PW Stiff 2° Flat
:cleveland:588RTX CB 50.10 GW
:cleveland:588RTX CB 54.10 SW
:nike:VR V-Rev 60.8 LW
:nike:Method 002 Putter


Posted


Originally Posted by Sai-Jin

The one that kinda go straight then after the top of the ball height, it just turns left a little?



Yeah.  A baby curve is essentially straight, but will move slightly in one direction.   It's nice to know about if it's your flight, so you don't go straight for a pin on the left, but maybe you can go straight for a pin on the right.  Essentially a very narrow shot cone.

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Another hybrid in here too.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Posted

I have seen my ball does this a couple of times, but more often a bigger draw or an error of a push.

Seems like this is the hardest shot to make in golf?


Note: This thread is 5363 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.