Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5430 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I am looking to buy some new irons..I am around a 9 or 10 handicap. I have looked at the Callaway Razr X ones and Taylormade 2.0 and the Titelist Ap1 irons..all the same price. Any words of advice on which clubs are better than another. I have hit the Callways and taylormade irons..both felt nice off the club in the simulator that is. Willing to take any advice you have..Thanks!


Posted

Take a look at the Mizuno JPX 800s. They're as long as the Burners or the Razrs with less offset and very forgiving. Unless you need the offset, these are the best sticks around in the GI category....at least in my opinion, and I tried all the same ones. A close 2nd are the Cobra S3s. I would put the AP1s at the bottom because they're not as long as the others...just as forgivng though.


Posted

When you're looking at distance, take a look at the loft of the irons... Some can be misleading. You'll think "OMG this 7i is going 200!!!" when in reality, it's the same loft as another makers 6i or 5i... and don't ignore STOCK shaft length either... I think overall you'll find that irons are VERY similar. You'll just have to find a set that "feels good" or "looks good at address", which will inspire confidence...

... and the #1 tip:  Get fitted for irons. (shaft length, lie, grip size, etc...)


Posted
Originally Posted by BigBen827

When you're looking at distance, take a look at the loft of the irons... Some can be misleading. You'll think "OMG this 7i is going 200!!!" when in reality, it's the same loft as another makers 6i or 5i... and don't ignore STOCK shaft length either... I think overall you'll find that irons are VERY similar. You'll just have to find a set that "feels good" or "looks good at address", which will inspire confidence...

... and the #1 tip:  Get fitted for irons. (shaft length, lie, grip size, etc...)


Make sure you look at this before you think that the AP1's aren't as long as any of the above mentioned. For instance, an AP1 7 iron has a degree more of loft than a JPX 800 and two degrees more loft than a S3.


Posted

Ok i will look into that. Thanks alot! honestly I dont think I would be able to tell if its like a one degree difference from the razr x to the 2.0 irons.  I think the PW is the the one that has different degrees ..one is 44 and the other is 43 i thought.. But i will look at the specs and compare...any preference on these two brands? im such an indecisive person haha...reviews help alot..and me hitting them equally well didnt help..I will need to hit them again.


Posted

I just looked up the specs..and it was 1 degree either way for both sets..taylormade had some 1 degree more and some 1 degree less..and visa versa with the razr X compared to taylormade


Posted
Originally Posted by Tmurry14

the gunmetal head of the TM irons look sweet...i just need to hit them again and figure out a difference between them

just so you know, that finish on the grooves does start to wear off a bit. it's not noticeable at address (at least so far). shots off the toe don't leave a mark, though (on the darker black area).


Posted

It'd also be nice to know a little more about your game... are you a 9 or 10 hcp and still getting better and practicing often or do you just play every other weekend.  What areas of the swing do you have trouble with?  The reason I ask is that at that level you can get a less forgiving club that will allow you to work the ball later on if you are on the path where you are improving... if you just play every once in a while or aren't practicing often then the more forgiving sets would be the better option.

Of the three sets you listed, I personally like the Titleist.  I really like the way that they look... If you feel that you can handle a little more club you could always look at the AP2s as well... I really like those.

Tristan Hilton

My Equipment: 
Titleist TSR2 Driver (Fujikura Pro 2.0 TS; 10.5°) · PXG 0211 FWs (Diamana S+ 60; 15° and 21°) · PXG 0211 Hybrid (MMT 80; 22°) · Edel SMS Irons (SteelFiber i95; 5-GW) · Edel SMS Pro Wedges (SteelFiber i110; 56°, 60°) · Edel Classic Blade Putter (32") · Maxfli Tour Ball · Pinned Prism Rangefinder · SuperStroke Grips · Flightscope Mevo · TRUE Linkswear Shoes · Vessel Player V Pro 

Awards, Achievements, and Accolades

Posted


Originally Posted by tristanhilton85

It'd also be nice to know a little more about your game... are you a 9 or 10 hcp and still getting better and practicing often or do you just play every other weekend.  What areas of the swing do you have trouble with?  The reason I ask is that at that level you can get a less forgiving club that will allow you to work the ball later on if you are on the path where you are improving... if you just play every once in a while or aren't practicing often then the more forgiving sets would be the better option.

Of the three sets you listed, I personally like the Titleist.  I really like the way that they look... If you feel that you can handle a little more club you could always look at the AP2s as well... I really like those.

I would still like to get better yes..I do not practice as much as I should or would like.  I have more trouble with my 8-W shots actually..much better player with my long irons. I will try and hit the titleist clubs..I have looked at a used set for 420 dollars..what do you think of that price? FYI my name is Tristan too haha..I had the king cobra oversize irons from 1995..they were my dads..then when he stopped playing I took them and used them till now..honestly I want a new set of clubs while improving my game more..possibly a few strokes a round if not more. But I have my days were I do much better and much worse..the consistency needs to be there. I just hope with new clubs n practice I can get back to being consistant..but who is consistant in golf now days haha


Posted

Tmurry14,

Since you're a 10 handicap you should take a look at the Mizuno JPX-800 pro irons. They are a forged game improvement iron that has less offset and a thinner top line than most game improvement irons, but best of all,... they just feel wonderful when struck well. I like that most companies are now offering a forged game improvement iron for us avid golfers who dont want a big clunky club but don't have the "game" for a players iron either. The JPX-800 pros still get good distance without jacking up the length and lofts to gain distance like some others do. The Callaway Diablo forged irons are a nice set but the are pretty $$$, and the AP-2 forged irons are nice as well but not quite as forgiving as the JPX-800 pros in my opinion.

Good luck in your search.


Posted


Originally Posted by Shaggy

Tmurry14,

Since you're a 10 handicap you should take a look at the Mizuno JPX-800 pro irons. They are a forged game improvement iron that has less offset and a thinner top line than most game improvement irons, but best of all,... they just feel wonderful when struck well. I like that most companies are now offering a forged game improvement iron for us avid golfers who dont want a big clunky club but don't have the "game" for a players iron either. The JPX-800 pros still get good distance without jacking up the length and lofts to gain distance like some others do. The Callaway Diablo forged irons are a nice set but the are pretty $$$, and the AP-2 forged irons are nice as well but not quite as forgiving as the JPX-800 pros in my opinion.

Good luck in your search.


I am not a fan of those clubs or mizuno actually..but I appreciate the offer of information


Posted


Originally Posted by Tmurry14

I am looking to buy some new irons..I am around a 9 or 10 handicap. I have looked at the Callaway Razr X ones and Taylormade 2.0 and the Titelist Ap1 irons..all the same price. Any words of advice on which clubs are better than another. I have hit the Callways and taylormade irons..both felt nice off the club in the simulator that is. Willing to take any advice you have..Thanks!



I personally would go with the TM Burner 2.0 irons. Not only do they look nicer, they are GI irons that are actually played by some of their touring staff (Kenny Perry and Natalie Gulbis).

My Tools of Ignorance:

Driver: Ping I20 9.5*
Woods/Hybrids: Cobra AMP 3W and 3 HY

Irons: Cobra AMP 4-GW

Wedges: Callaway Forged Copper 56* and 60*

Putters: Scotty Cameron  35" (Several of the flow neck blade variety)

Ball: Bridgestone B330-RX and Srixon Z-Star

Bag: Nike Performance Carry


Posted


Originally Posted by Elvisliveson

I personally would go with the TM Burner 2.0 irons. Not only do they look nicer, they are GI irons that are actually played by some of their touring staff (Kenny Perry and Natalie Gulbis).



What does GI mean? and thanks..I think I am leaning towards those as wel. And if natalie plays with them then I def have to go with the TM :) hah


Note: This thread is 5430 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 254 5-4 Arms off chest in backswing and downswing. Short swing, pause and then hit.  Hit foam balls. Keeping arching of wrist a focus as well. 
    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.