Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5267 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I bought a set of these to replace by DCI 962's and I have noticed these fly alot lower. Any reason for this or am I just not used to the extra weight of the head?

Mizuno MP-57 Irons

Titleist 975D Titanium Driver

Callaway 3 wood

Mizuno MP T-10 Wedges 52,56,60


  • 2 weeks later...
Posted

I would suspect that the characteristics of the golf shaft don't fit your speed and transition timing from back to front.

Titleist 910D2 10.5* Stiff / Taylormade 3 Wood - Superfast 2.0 15*  3 Superfast 2.0 Rescue 18* Stiff Shafts


Posted

Well the MP-57s are 1 degree de-lofted compared to your older set. They also have a tad less offset.

That probably shouldn't make for much of a difference in height alone however the weighting of these clubs is probably very different. Not just added weight but distribution of weight. The more weight goes tot he edges the higher the ball flight.

nickent.gif4DX Evolver Driver, ping.gif Rapture 3 Wood, taylormade.gif Burner 08 5 Wood, nickent.gif 3DX RC 3-4 & 5DX 5 Hybrid,
nickent.gif 6-PW 3DX Hybrid Irons, cleveland.gif High Bore 09 GW-SW, touredge.gif 60* Wedge, maxfli.gif Revolution Blade Insert Putter
 
Yes I'm Aware That's 16 Clubs!

Posted

Shaft perhaps? What shaft was in your DCI's? Tri-spec? What is in the Mizzy's?

Originally Posted by Redvalic

I bought a set of these to replace by DCI 962's and I have noticed these fly alot lower. Any reason for this or am I just not used to the extra weight of the head?




Posted

The 57s are considerably less of a cavity-back than your old Titleists were, so part of it could be too that you either dont have enough clubhead speed.  A bigger cavity is going to give a higher launch, so with less of a cavity you need to hit the ball a bit harder to get enough backspin to get the ball up in the air.

It could be the shafts too.  If the shafts are too stiff for your swing it would cause you to not get as much height on your shots.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Note: This thread is 5267 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Nah, man. People have been testing clubs like this for decades at this point. Even 35 years. @M2R, are you AskGolfNut? If you're not, you seem to have fully bought into the cult or something. So many links to so many videos… Here's an issue, too: - A drop of 0.06 is a drop with a 90 MPH 7I having a ball speed of 117 and dropping it to 111.6, which is going to be nearly 15 yards, which is far more than what a "3% distance loss" indicates (and is even more than a 4.6% distance loss). - You're okay using a percentage with small numbers and saying "they're close" and "1.3 to 1.24 is only 4.6%," but then you excuse the massive 53% difference that going from 3% to 4.6% represents. That's a hell of an error! - That guy in the Elite video is swinging his 7I at 70 MPH. C'mon. My 5' tall daughter swings hers faster than that.
    • Yea but that is sort of my quandary, I sometimes see posts where people causally say this club is more forgiving, a little more forgiving, less forgiving, ad nauseum. But what the heck are they really quantifying? The proclamation of something as fact is not authoritative, even less so as I don't know what the basis for that statement is. For my entire golfing experience, I thought of forgiveness as how much distance front to back is lost hitting the face in non-optimal locations. Anything right or left is on me and delivery issues. But I also have to clarify that my experience is only with irons, I never got to the point of having any confidence or consistency with anything longer. I feel that is rather the point, as much as possible, to quantify the losses by trying to eliminate all the variables except the one you want to investigate. Or, I feel like we agree. Compared to the variables introduced by a golfer's delivery and the variables introduced by lie conditions, the losses from missing the optimal strike location might be so small as to almost be noise over a larger area than a pea.  In which case it seems that your objection is that the 0-3% area is being depicted as too large. Which I will address below. For statements that is absurd and true 100% sweet spot is tiny for all clubs. You will need to provide some objective data to back that up and also define what true 100% sweet spot is. If you mean the area where there are 0 losses, then yes. While true, I do not feel like a not practical or useful definition for what I would like to know. For strikes on irons away from the optimal location "in measurable and quantifiable results how many yards, or feet, does that translate into?"   In my opinion it ok to be dubious but I feel like we need people attempting this sort of data driven investigation. Even if they are wrong in some things at least they are moving the discussion forward. And he has been changing the maps and the way data is interpreted along the way. So, he admits to some of the ideas he started with as being wrong. It is not like we all have not been in that situation 😄 And in any case to proceed forward I feel will require supporting or refuting data. To which as I stated above, I do not have any experience in drivers so I cannot comment on that. But I would like to comment on irons as far as these heat maps. In a video by Elite Performance Golf Studios - The TRUTH About Forgiveness! Game Improvement vs Blade vs Players Distance SLOW SWING SPEED! and going back to ~12:50 will show the reference data for the Pro 241. I can use that to check AskGolfNut's heat map for the Pro 241: a 16mm heel, 5mm low produced a loss of efficiency from 1.3 down to 1.24 or ~4.6%. Looking at AskGolfNut's heatmap it predicts a loss of 3%. Is that good or bad? I do not know but given the possible variations I am going to say it is ok. That location is very close to where the head map goes to 4%, these are very small numbers, and rounding could be playing some part. But for sure I am going to say it is not absurd. Looking at one data point is absurd, but I am not going to spend time on more because IME people who are interested will do their own research and those not interested cannot be persuaded by any amount of data. However, the overall conclusion that I got from that video was that between the three clubs there is a difference in distance forgiveness, but it is not very much. Without some robot testing or something similar the human element in the testing makes it difficult to say is it 1 yard, or 2, or 3?  
    • Wordle 1,668 3/6 🟨🟨🟩⬜⬜ ⬜🟨⬜⬜🟨 🟩🟩🟩🟩🟩
    • Wordle 1,668 3/6 🟨🟩🟨🟨⬜ 🟩🟩🟩🟩⬜ 🟩🟩🟩🟩🟩 Should have got it in two, but I have music on my brain.
    • Wordle 1,668 2/6* 🟨🟨🟩⬛⬛ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.