Jump to content
IGNORED

Once again another ruling that needs clarification


Note: This thread is 4797 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

It happened on the 18th hole today where there is a lateral hazard marked by yellow stakes which is a forced carry from the tee, and my friends tee shot hits the rocks (in the hazard) and bounces backwards. However he is able to play the ball from the hazard as it is lying in a beach like area, so he proceeds to hit his shot and skulls it into the rocks and bounces backwards but this time far enough so that it goes into the water.

So the question here is where does he drop? because I'm pretty sure you cannot drop in a hazard and his ball had never crossed the hazard line at any point during his  second shot.

Does he drop in the hazard? Re-tee? or something else?

We let him just drop the ball in the hazard as we couldn't come up with any other solution


He drops according to the rules. [quote] 26-2. Ball Played Within Water Hazard a. Ball Comes to Rest in Same or Another Water Hazard If a ball played from within a water hazard comes to rest in the same or another water hazard after the stroke, the player may: (i) proceed under Rule 26-1a. If, after dropping in the hazard, the player elects not to play the dropped ball, he may: (a) proceed under Rule 26-1b, or if applicable Rule 26-1c, adding the additional penalty of one stroke prescribed by the Rule and using as the reference point the point where the original ball last crossed the margin of this hazard before it came to rest in this hazard; or (b) add an additional penalty of one stroke and play a ball as nearly as possible at the spot from which the last stroke from outside a water hazard was made (see Rule 20-5); or (ii) proceed under Rule 26-1b, or if applicable Rule 26-1c; or (iii) under penalty of one stroke, play a ball as nearly as possible at the spot from which the last stroke from outside a water hazard was made (see Rule 20-5).[/quote]

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades



Originally Posted by Mizuno Guy

It happened on the 18th hole today where there is a lateral hazard marked by yellow stakes...

Lateral hazards are marked by red stakes. Yellow stakes indicate a regular water hazard, from which you have fewer options than a lateral hazard. (The differences are moot for the sake of your specific question, but thought you should know for future reference,)

Bill




Originally Posted by sacm3bill

Lateral hazards are marked by red stakes. Yellow stakes indicate a regular water hazard, from which you have fewer options than a lateral hazard. (The differences are moot for the sake of your specific question, but thought you should know for future reference,)



HC 6.3 and not knowing hazard rules? May be it is possible, just do not visit them...




Originally Posted by sacm3bill

Lateral hazards are marked by red stakes. Yellow stakes indicate a regular water hazard, from which you have fewer options than a lateral hazard. (The differences are moot for the sake of your specific question, but thought you should know for future reference,)





Originally Posted by luu5

HC 6.3 and not knowing hazard rules? May be it is possible, just do not visit them...


My bad got got mixed up on which one was which. I know the rules on for the different stakes just made a mistake on which one was which.


Note: This thread is 4797 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 335 - More putting work, with the focus on setup and hitting the sweet spot. 
    • Day 153: putted for a while using the 2 cups drill inside. Working on bead primarily. Contact was really good. 
    • Day 8: 12/17/2024 Okay I took my new PPJ swing thought to the range today. I wasn't sure I was quite ready to do so, but I'm glad I did.  When I got it right it was good... really good. When I got it wrong it was a major fail. I hit lots of really ugly ones. But I didn't let that deter me. I stayed committed and focused on the PPJ and I avoided any temptation to go back to what I was doing before just so that I could "look" better at the range. I'm pretty excited about what I saw when I got it right.  I hit the 6 iron mostly (nearly all block work today). I also hit about 6 balls each with the PW, 8I, 5W and Driver. Those had varying degrees of success. I did crack one drive that let me feel and see what the changes will look like once I get fully trained.  Anyway, I'm going to go back to the mirror work for a couple of more days before bringing it back to the range. I do feel like if I can get this right my swing will improve a lot. So I think its worth the effort. I liked the way it looked on GEARs when I get it right, and I like the results I got at the range when I got it right. Now the goal is to work towards getting it right more often. 
    • So I think it's that they can't just bend the shaft or hosel to get it to a new lie angle. They adjust that and it changes the weighting, so they have to then adjust all the weights to get it balanced again. I get the impression that it's a bit of an iterative process and they do it all in the US, so they're paying US labor costs to build it and make it work how it's supposed to. Whether you believe in the tech or not, I think that's a true statement.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...