Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5034 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Okay so currently, i have a 5 wood (18*) and then i have a 4 iron (24*). Should i get a 21* 4 iron hybrid, or a 3 iron hybrid (18*) The guy at carls said 18, but i was a little confused as to why i would buy a hybrid with the same loft as my fairway wood.


Posted

What's the distance gap between your 5-wood and 4-iron?  Factor in carry and roll--you should know both numbers for both clubs.  If it's significant, you may want to get a hybrid in between.  If not, then it doesn't really matter.

It's so much more than loft.  Do you want to hit it higher?  Lower?  This is mostly about CoG and shaft.  Do you want to promote a draw?  Hybrids do this very well.

If distance is the primary concern, then you just need to take all your clubs down to a pro shop and hit them on the launch monitor.  See how far the ball goes.  Hit a few hybrids and see which one fills the gap.

Kevin

Titleist 910 D3 9.5* with ahina 72 X flex
Titleist 910F 13.5* with ahina 72 X flex
Adams Idea A12 Pro hybrid 18*; 23* with RIP S flex
Titleist 712 AP2 4-9 iron with KBS C-Taper, S+ flex
Titleist Vokey SM wedges 48*, 52*, 58*
Odyssey White Hot 2-ball mallet, center shaft, 34"

Awards, Achievements, and Accolades

Posted

My 5 wood goes about 230-235, and 4 iron is just about 200. So yeah i'd say 30 yards is pretty significant! Its tough when I'm at like 210 and I have to choke up on my 5 wood and try not to hit it as hard. So i was thinking a 4 hybrid (21*) would be the way to go? Cause my 4 iron is 24*. I would like it to have a higher trajectory, also. Thanks for the help!


Posted

You can get your 4 iron bent a little to get it to around a 3.5 iron ... maybe 2 degrees strong.  That is what a lot of pros do to fit their gaps.  If you have not gotten fitted then this is your opportunity to also check your lie angle on your clubs.  With a proper fitting you can taylor your distances to how you like them.  I don't carry a 5 wood, but my R11 @ 3 rescue is around 230 yards while my iron 4 iron on my Mizuno MP63 was around 195 yards.  When I checked the loft of my iron it was 1 degree weak, so I set it at two degrees strong and now my 4 iron is about 210 yards.

You really can't tell what an iron loft is by the manufacturer label, for example I checked my brothers Taylormade CGB Max irons and they were all 5 degrees strong!  When you consider that 4 degrees is the average gap between clubs, that meant that his 4 iron was actually a 1 degree strong 3 iron!

So get fitted and make sure there is the correct spacing between your clubs.  Also getting fit for lie is the best thing you can do for your golf game, the tiny sweet spot on your club suddenly becomes huge!


Note: This thread is 5034 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.