Jump to content
IGNORED

Where to buy good and cheap golf equipment, need some advices

golflearner
 Share
Note: This thread is 2824 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

BBailey Member

BBailey

Internet sites I have tried with great success.

RockbottomGolf or Hurricane Golf... I have used both and highly recommend either. If you have some time on your hands, also try Deal a Day golf; they have daily deals on various golf equipment.


Ed Rooney Member

Ed Rooney

Any local golf shoppe should have a used bin with a good assortment of clubs. Today at my local, I saw a set of RAC LT's for $130, an R7 460 for $70, plenty of good, cheap FW's, hybrids and wedges. I picked up a $29 Ping putter.

forepoints Established Member

forepoints

Try to buy a brand name set that matches your ability. For instance, stay away from forged irons or blades. If you're starting out, get a set that is easy to hit (eg. Adams Golf). If you have a small budget, go to Play It Again Sports and check out what they have. If you find you don't like the game, you can always sell it back to them. And if it's a brand name, it'll sell faster and you usually will get more for it than a no-name.


avmcdevildog Member

avmcdevildog

I got a set of Turner LPT irons fully custom for $220 that's including shipping. They are clones of the RBZ irons. A lot of guys here will knock clones but most of them have never even seen clones. They are high quality, and come from a reputable company. Check em out www.diamondtour.com

juanrjackson Dedicated Member

juanrjackson

Check out globalgolf.com....great prices on used and openbox returns..plus fast shipping.


In my clicgear.gif 2.0 Push Cart and callaway.gifgolf bag are - 

 

 Z-Star driver 10.5  Mashie 3 and 7 metals  Mashie 4 hyrbird  Z-Star 4-PW Irons  cleveland.gifCG Black 48, 52, 56 degree wedges  GoLo putter  upro mx+ gps


  • 4 years later...
Hacker James Great Member

Hacker James

I also vote for RockBottom, GlobalGolf, 3Balls , Mr Topes.  I have used all of these and a couple of others on ebay and amazon.com

"James"

:titleist: 913 D3 with Aldila RIP Phenom 60 4,2 Regular Shaft,  :touredge: Exotics XCG-7 Beta 3W with Matrix Red Tie Shaft:touredge: Exotics EX8 19 deg Hybrid w UST Mamiya Recoil F3 Shaft:touredge: Exotics EX9 28 deg Hybrid w UST Mamiya Recoil F3  shaft, / Bobby Jones Black 22 deg Hybrid:touredge: Exotics EXi 6 -PW  w UST Mamiya Recoil F2 Shaft, SW (56),GW (52),LW (60):touredge:  TGS),/ ODDYSEE Metal-X #7 customized putter (400G, cut down Mid Belly)

Awards, Achievements, and Accolades
1

Note: This thread is 2824 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • iacas
      Garmin R50 Launch Monitor

      By iacas ·

      I've got one and am going to begin testing. Tips for Approach R50 Placement | Garmin Customer Support Garmin Support Center is where you will find answers to frequently asked questions and resources to help with all of your Garmin products. Using Practice Balls With Garmin Golf Launch Monitor Products | Garmin Customer Support Garmin Support Center is where you will find answers to frequently asked questions and resources to help with all of your Garmin products. If you buy one via a link I can give you (you'll pay nothing more than standard cost), I'll give you a free hour of instruction on GEARS. Reach out prior to purchase. And subscribe to this topic for more info. I'm going to test the accuracy and a few other things here in the next week or so.
    • DeadMan
      Wordle Daily Puzzle

      By DeadMan ·

      Wordle 1,278 3/6 ⬜⬜⬜🟩🟨 ⬜🟩⬜🟩🟨 🟩🟩🟩🟩🟩
    • ChetlovesMer
      "5 Minutes Daily" Practice Challenge

      By ChetlovesMer ·

      Day 9: 12/18/2024 Okay so about 15 minutes of focused mirror work today and I still have the station set up outside my office door so every time I enter or leave I get 1 to 5 extra slow-mo swings in.  The PPJ swing thought is getting better. In terms of PP I need to make sure I keep the attention on using the ground up through the movement and not just "going through the motions".  The J part, I have to focus on my lead sit-bone driving directly away from the ball. I still like to go up and out on that when I lose focus.  Repetitive slow-mo and medium-mo swings are helping. 
    • iacas
      Can Somebody Explain to Me Why Lie Angle Balanced Putters Are Important?

      By iacas ·

      What technology? There’s not much. Or a spreadsheet. 🤣😜
    • ChetlovesMer
      Can Somebody Explain to Me Why Lie Angle Balanced Putters Are Important?

      By ChetlovesMer ·

      I was thinking about what you suggested on this. And it's very possible its true.  I was also thinking, why wouldn't they have a piece of software that tells them something like: "If you drill the shaft hole at x angle and the shaft is y long, but the weights in A, B and C locations at D, E and F amounts? I mean we aren't modelling anything here that isn't a known relationship?  I've been in the manufacturing world a long time (33 years.) I've worked for and seen tons of manufacturers in the US who can handle one-piece flow with no hiccups what so ever.  I would love to take a plant tour and offer my services to these guys. On a whim, I looked on their webpage and they do have two positions available. A fulfillment associate and a fitting representative. Both at positions are at their plant in OR. Neither of these was a lean manufacturing engineer so I moved on.  I apologize for beating this dead horse.  I'm not sure why the cost adder for custom built from standard parts bothers me so much. It could be because I've worked so many places that just have you build up a nomenclature which relates to a build sheet and end of line test. Which equals no cost adder for standard parts. Maybe it's because I once toured the Roles Royce plant in England and thought "I'd never feakin buy one of these cars." Maybe I've been spoiled by PXG and Mizuno, the last two places I've order custom fit irons from. They customized each club including lie angle tweaks, loft tweaks, length tweaks, weight port tweaks, etc... No cost adder. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept
The popup will be closed in 10 seconds...