Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4375 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

So I have the option to buy either 1 vokey 54-11 wedge for 20 bucks in pretty good condition. Or 2 callaway (I believed vintage forged) wedges 54 -12 and 58 -10 for 15 bucks each, can't tell if they are rusty or just "vintage". Does it matter? Not completely sure about the bounce but I think any of them would be better than my current and only wedge which is 60* from Kmart.

What do you guys think I should go with?


Posted

Well... having seen none of them, and knowing nothing of your skills or how you approach wedge play, it is a bit hard to guess.  But assuming they aren't TOO vintage, I'd go with the two Callaways, mostly because I think a 54 and a 58 is more useful up close than a 54 alone, particularly if you have been getting along okay with the 60.  If you can, look at the condition of the grips and make sure they shafts are intact.  New grips would set you back the cost of the clubs, and a bent or badly rusted shaft pretty much makes them garbage.  If you could hit them before buying, that would be nice.

Driver: Titleist 913 D2 10.5*, Aldila RIP Phenom 50

Fairway 1: Titleist 913F, 17*, Titleist Bassara W55

Fairway 2: Titleist 913F, 21*, Titleist Bassara W55

Irons: Titleist AP1 714 5-PW, Aerotech Steelfiber i95

Wedges: SCOR 4161 48/52/56/60, Genius 9

Grips: GolfPride New Decade Red Mid-size on all of the above.

Putter: Scotty Cameron Newport 2 - Super Stroke Slim 3.0


Posted
I'd go with 2 over 1. Grips can be done yourself for under 10 bucks and whoever said rusty or bent shafts make them garbage knows not of what they speak.

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


Posted

Hit them all at the store before I bought and went with the 2 callaways over 1 vokey. Both clubs look to be in good shape. Shafts are straight with no rust and 1 of them still has a pretty good grip.


Posted

The Callaway XForged "vintage" has a non-chrome finish and was designed to "rust".

The two should work well; you might regrip both so they have the same model, thickness and age.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

The Callaway XForged "vintage" has a non-chrome finish and was designed to "rust".

The two should work well; you might regrip both so they have the same model, thickness and age.


That's kinda what I though. Thanks for the info. I probably will regrip them someday. I'm just not that great yet so the grip doesn't really bother or affect me much. Thanks for the advice tho


Posted

... I probably will regrip them someday. I'm just not that great yet so the grip doesn't really bother or affect me much. ...

Well, yes it does. Especially for your scoring wedges (54* and 58*), you want the same and thickness of grip. If one grip is thinned out and the other is full, you will tend to get more hand action on the thinned out one and greater likelihood of missing to the left (if you are R-handed).

Spend a few extra $$ for new grips (installation often cheap or free in winter). That way, you'll have consistent "handles" when you break in the wedge team.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

Well, yes it does. Especially for your scoring wedges (54* and 58*), you want the same and thickness of grip. If one grip is thinned out and the other is full, you will tend to get more hand action on the thinned out one and greater likelihood of missing to the left (if you are R-handed).

Spend a few extra $$ for new grips (installation often cheap or free in winter). That way, you'll have consistent "handles" when you break in the wedge team.


Ok, probably best to make sure my equipment at least gives me the best chance at getting better at this crazy game. Should I look for any specifics in the grips? Is there a difference between the cheaper and more expensive ones?

Thanks for the help, I am totally new to the whole golf equipment thing since I have only used a starter box set up till this point.


Posted

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

Should I look for any specifics in the grips? Is there a difference between the cheaper and more expensive ones?

Just look for something that feels good to you. There are plenty of quality grips for $5 or less. And as @WUTiger pointed out, it's best to be uniform with them if possible.

Tyler Martin

Awards, Achievements, and Accolades

Note: This thread is 4375 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Wordle 1,657 5/6* 🟨🟨⬜⬜🟩 ⬜⬜🟨🟩🟩 ⬜🟩🟩🟩🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
    • Day 37: did my drill swings in the garage with foam balls for about 15 minutes. Working on getting my backswing more turned and then going from there. 
    • Thanks but honestly… I don't know any other way. I don't mind being wrong so long as I know where to go from there. I don't like being wrong — I'd love to get things right (which is different than "being right"). I recommend grabbing a furniture slider or a paper plate or something, and doing something like this: First, make a swing where you let your trail foot swing out as you turn, then twist that foot back in. From DL and FO, it'll look like this: Then, during a regular backswing, try to twist your foot in slightly (demonstrated in the left image): You'll notice a crease along the trail side of your hip, your pelvis will "fold" into that thigh (internal rotation of the hip joint), and your "bits" will be squished a little between your pelvis and your thigh. Ben Hogan said once: "At the top of the back swing the groin muscle on the inside of your rt [sic] leg near your right nut will tighten," Hogan wrote. "This subtle feeling of tightness there tells you that you have made the correct move back from the ball." I don't know about that, but you will probably feel something down around that area.
    • Yep. I think it will start to feel even more athletic when we start on the downswing stuff later.  I know, it's just I want to be younger so I have more time to enjoy the changes. 🙂 
    • I need to drop a couple of stone. 🙂 😛    Yep. Yeah, but in the end, it feels more athletic, like you're actually using your legs, yeah? As you know… we use the best available info we have. Like others, I was fooled a little by 2D images for awhile (moving or still). Unlike others, I've learned and grown and moved on since then, while they're still looking at their images (often from lousy camera angles).
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.