Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

One worn spot on grip: normal?

joekelly

By joekelly
in Clubs, Grips, Shafts, Fitting

 Share
Note: This thread is 4344 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

joekelly Great Member

joekelly

Posted
Posted

All my grips have, to some degree, a wear spot precisely where my right thumb sits on the club. On my 8i the rubber is gone and now i'm onto the tape, at this one spot,  so i wondered if this is common with other guys. The rest of the grip is good, no problems.

Where does your grip wear out first?


MS256 Great Member

MS256

Posted
Posted
My grip wears more in that spot also, but I'm pretty picky about the condition of my grips so they are changed long before it would be very obvious. I don't know if wear in that spot is normal or not because very few things about the way I hit a golf ball could be called normal.

Abu3baid Great Member

Abu3baid

Posted
Posted
Mine wears out in the heal pad, and right down the seam line of my forefinger it starts ripping slightly before I replace..

:adams: / :tmade: / :edel: / :aimpoint: / :ecco: / :bushnell: / :gamegolf: / 

Eyad

Awards, Achievements, and Accolades
1
1
1

SamGray Well Established Member

SamGray

Posted
Posted
I normally replace my grips 1-2 times per year so I really don't have an issue with grips wearing. I do have an issue with some slickness in that spot from time to time. I also have a bit of an issue with my gloves blowing out on my lower left palm...

Sam Gray

Whats in my :ping: Ping Hoofer Carry Bag?
Driver: :ping: Ping G25 9.5*    Shaft: Graphite Design AD DI 7x
3 Wood: :callaway: Callaway X HOT Pro 3 Deep 14.5       Shaft: Diamana Blue Board 83x
Hybrid: :adams: Adams A12 prototype 20*  Shaft: Aldila Rip NV blue prototype 80x
3 iron--Pitching Wedge: :mizuno: MP-64 irons 1* flat      Shafts: KBS Tour Stiff 
Wedges: :cleveland: 588 Forged 54 degree 12 degree bounce and 61 degree 9 degrees bounce   
Putter: :ping: Ping Karsten 1959 Anser 2


Na5carr3 Member

Na5carr3

Posted
Posted

Holding the club too tight? Never seen wear like that before.....

Driver      -  K15 10.5 w/ Ping TFC149D Shaft in stiff

4 Wood   -  Rapture V2 17.5* Aldila S-75

Hybrid    -   Super Hybrid SS 19* w/ Matrix Program

Irons      -   i20's 3-W, UW, SW & LW w/ KBS Tour Stiff +1/2" White Dot

Putter    -   White Ice #9 33"

Ball       -   B330-S & B330-RXS

                 D2 Feel

 

Bragging about a 200 yard 7 iron is not golf.


rustyredcab Great Member

rustyredcab

Posted
Posted

All my grips have, to some degree, a wear spot precisely where my right thumb sits on the club. On my 8i the rubber is gone and now i'm onto the tape, at this one spot,  so i wondered if this is common with other guys. The rest of the grip is good, no problems.

Where does your grip wear out first?

Down to the tape? Not normal. Not common.

Aside from any other advise, change your grips long before you wear them to the tape. Even if just in one spot.

Russ - Student of the Moe Norman swing as taught by the pros at - http://moenormangolf.com

Titleist 910 D3 8.5* w/ Project X shaft/ Titleist 910F 15* w/ Project X shaft

Cobra Baffler 20* & 23* hybrids with Accra hybrid shafts

Mizuno MP-53 irons 5Iron-PW AeroTech i95 shafts stiff and soft stepped once/Mizuno MP T-11 50.6/56.10/MP T10 60*

Seemore PCB putter with SuperStroke 3.0

Srixon 2012 Z-Star yellow balls/ Iomic Sticky 2.3, X-Evolution grips/Titleist Lightweight Cart Bag---

extra/alternate clubs: Mizunos JPX-800 Pro 5-GW with Project X 5.0 soft-stepped shafts


Note: This thread is 4344 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • WillieT
      "5 Minutes Daily" Practice Challenge

      By WillieT · Posted

      Day 34 (14 Dec 25) - Got outside for a few moments to work on bump and runs with the 4h (again using the exaggerated weight shift reminder of the left (lead) heel). Finding that it helps keep the downswing arc extended.  
    • DeadMan
      Wordle Daily Puzzle

      By DeadMan · Posted

      Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • boogielicious
      Driver and Fw3 Swing Weight Changes, Make Sense?

      By boogielicious · Posted

      You can try it with some lead tape first to see if it works for you.
    • boogielicious
      Wordle Daily Puzzle

      By boogielicious · Posted

      Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • BananaBomber
      Driver and Fw3 Swing Weight Changes, Make Sense?

      By BananaBomber · Posted

      I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept