Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6688 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

hi there, was at the driving range hitting my ping g5 driver and started to notice a different sound that my club made on impact, as this sound was not abnormal, it was just slightly different, i never gave it a thought to look at the club face..... i since realised after looking at the club face there is a massive crack right in the sweet spot on the face and bent slightly in... surely this should never happen to a club of that quality... i do hit the ball hard but no matter how hard, a club head of this stature should never give in like this surely....

any ideas if this sort of problem can be fixed or is it not fixable?? hope i dont have to buy a new driver, ive spent £330 ($650) on this club with the re shaft and hope i dont have to buy a complete new driver any replies appreciated thanks

Bubba Watson

In the Bag:

Driver: Titleist 910d3 9.5* Stiff Projext X-7A3 Rescue: Taylor Made Burner TP 20* X-stiff 3 Iron: Titleist AP2 Projext X Rifle Irons: Titleist 710mb NS PRO 105T Stiff Wedges Cleveland CG12 60* Titleist Vokey Spin Milled 56.07 Cleveland CG14 52* Putter: Titleist Scotty Cameron Studio 2.5 (2008) Ball: Titleist Pro-V1


Posted
u will just have to buy a new head, unless Ping replaces it. u can take the shaft off and stick it into a new head if u have to

Driver: 10.5* SuperQuad TP 1st Edition All Black V2 Stiff
5 Wood - 585.h 19* DG S300
Irons: 3-PW S59 Stiff
Wedges: Rac TP 52*, 60* MP-T 56*
Putter(s): Anser 3 TP Black ballGET TO SINGLE DIGITS!Goal: Beat a certain admin that lives in my town


Posted
i think ping will replace it, i know several other major OEMs will do the same. My friends G2 cracked like 2 years ago and they sent him a new head, im pretty sure it was free. Get in touch with your ping rep or call them, theyll help you sort stuff out.

Driver: r7 460 TP 10.5 w/Ozik Altus SX
3 Wood: Tour Proto 14.5 w/Ozik Xcon7 SX
Hybrid: Tour Proto. A2TS 19 w/ Matrix Ozik Altus HB SX
Irons: R7tp w/project x 6.0
Wedges: spin milled 56 w/ Proj. x 5.5 XTour60putter: Monza CorzaBall: Pro V1/ whatevers in my bag.


Posted
As mentioned above, get in touch with your Ping Rep. In some cases the place where you bought the club will send it back to Ping for you. That happened to a friend. His 3 wood head was damaged, and the Golfsmith sent it back for free (shipping) as a "sorry for the inconvience." The Golfsmith also gave him a demo to use until he got his club back. Check with the place you purchased first.

Posted
I had the old ping SI3 driver that did the same. I took it into the shop and they sent it to ping. I had to pay the shipping to ping but that was it
Driver - TaylorMade R9 460 10.5°
3 Wood - TaylotMade Burner Tour
3 & 4 Hybrids - Adams a7
Irons - R7 tp 5-PW
Wedges - Vokey SM Black Nickel - 52º - 56º - 60ºPutter - Scotty Cameron California - SonomaSkyCaddie - SG4Lowest Round - 68 - Par 72 /67.6/120Lowest Tournament Round - 69 -...

Posted

hi, many thanks for the replies, i thought about sending it to ping, but then i thought they wouldnt accept responsibility because ive had a new shaft put in it by the local driving range. When i first took it for a reshaft, I was told it invalidates the gurantee on it i suppose i can always try because its obviously a club fault and not mine, its right in the sweet spot so shouldnt do that..... do you still think its worth taking it to ping or not???? many thanks

Bubba Watson

In the Bag:

Driver: Titleist 910d3 9.5* Stiff Projext X-7A3 Rescue: Taylor Made Burner TP 20* X-stiff 3 Iron: Titleist AP2 Projext X Rifle Irons: Titleist 710mb NS PRO 105T Stiff Wedges Cleveland CG12 60* Titleist Vokey Spin Milled 56.07 Cleveland CG14 52* Putter: Titleist Scotty Cameron Studio 2.5 (2008) Ball: Titleist Pro-V1


Posted
give it a try, at this point you have nothing to lose.
Driver - TaylorMade R9 460 10.5°
3 Wood - TaylotMade Burner Tour
3 & 4 Hybrids - Adams a7
Irons - R7 tp 5-PW
Wedges - Vokey SM Black Nickel - 52º - 56º - 60ºPutter - Scotty Cameron California - SonomaSkyCaddie - SG4Lowest Round - 68 - Par 72 /67.6/120Lowest Tournament Round - 69 -...

Posted
yea they will replace it for free. I broke my RCH Callaway shaft on an old VFT Hawkeye just at the beginning of the summer and Callaway replaced it still. As long as the break comes in the course of normal play, I believe they have to replace it.

In The Huffer:

Driver: Superquad 10.5* Aldila NV-S Shaft
3w: 975 F
Hybrid: 22 Degree Baffler Multimetal3-PW: LCG Burner IronsSW: 56 Degree 588 GunmetalPutter: DfX No 2Balls: ALWAYS NXT Tour #3's, or NXT Extreme #3'sHome Course: Glenmoor Country Club: Jack Nicklaus Signature Course. 7015...


Note: This thread is 6688 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.