Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6601 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I decided to buy:

Driver, 3 Wood and Putter

For the putter I like the SC Studio Style Newport... not sure which number I should get.

For Driver and 3Wood I was heading towards Titleist just because I like the brand. However, I heard they are tough.

What would you reccommend for high handicap? I guess I would need something as neutral as possible? I will not be a long hitter for a while as I am very focused on control at the moment.

Any advaise is very welcome!

In my Bag:

Big Bertha 460 11* Driver
Big Bertha 3 Wood
Staff Hybrid 21* Staff Hybrid 24* Big Bertha 08 5-SW Irons Lob Wedge Vokey Oil Can 60* Newport 2 Studio Style Putter Balls


Posted

Driver - You need to be looking at something with a lot of loft (you will hit the ball further and straighter) For this i would be looking at something along the lines of:
Nike Sumo Lucky 13
Ping G10
or Ping G2/Nike Sasquatch if your looking for something a bit older and cheaper.

For your 3 wood i would suggest something big and forgiving with a graphite shaft such as:
Nike Sasquatch (both versions new and old of this club are good and worth looking at)
Taylormade V Steel, a bit older and there fore a bit cheaper, but i used this club for a long time and i loved it, only not using it because the shaft is too soft now.
Callaway Big Bertha
Ping (have forgotten the individual names of the club)

I would suggest having the same 5 wood as your 3 wood, for consistency in feel.

Irons - for your Irons i would suggest something fat and forgiving:
Nike Slingshot Irons (or Slingshot Tour if you wanted something a bit harder to hit)
Callaway Big Bertha
Mizuno mx 23 (bit older but great clubs)
most of the Ping range
Taylormade CGB

For your wedges i would suggest going for either 52 and 60 degrees or 56 and 60 degrees, there are hundreds of wedges to choose from but the most popular are usually:
Titleist vokeys
Cleveland (any one of their range of wedges are rated highly)
Mizuno Raw Haze
Ping (slightly more forgiving)
Taylormade RAC

Putter is personal preference, keep trying lots of different ones until you find what you like, as a starting point you could look at:
Odyssey
Taylormade Rossa series
Scotty Cameron series
YES! putters

Hope this helps, looks like its going to be an expensive Christmas lol

In my Ping UCLAN Team Bag

Nike Sasqautch 9.5 - V2 Stiff
Cleveland HiBore 15 - V2 Stiff
Ben Hogan Apex FTX, 2 - PW - Dynamic Gold StiffNike SV Tour 52, 58 - Dynamic Golf StiffYes Golf Callie - 33 inchesBall - Srixon Z star X


Posted
If you like Titleist, try the 907D1. It's very easy to hit straight and elevate. Also, if you are looking at the SC Newport, the Newport 2 is the only one that comes in various shaft lengths. For a fairway wood, the 906f4 is easy to hit. Titleist is making more stuff for the mid-handicapper, so don't be too intimidated by the name.

Posted
I decided to buy:

If you like Titleist, but want something for a high handicap, check out Cobra. Try for a 10.5 or 12 degree driver; especially if you play a low-spin ball, you'll be looking at decently long and decently straight drives in no time.

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Another hybrid in here too.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Posted
If you like Titleist, but want something for a high handicap, check out Cobra. Try for a 10.5 or 12 degree driver; especially if you play a low-spin ball, you'll be looking at decently long and decently straight drives in no time.

FWIW, I agree that Cobra might be a better choice for one whose handicap is north of 20. Also, I might suggest that instead of fairway woods, you give low lofted hybrids a try. Hybrids are so easy to hit and so many very fine golfers are using these clubs. Many manufacturers make great hybrids but, since we're talking Cobra, they make some of the most popular. Good luck.

shortgame85
In the Bag:
Driver: :TaylorMade: RBZ 9.5 Reg Flex
3 Wood :TaylorMade: RBZ Reg Flex
Hybrid: Ping G25 Hybrids 17*, 20*, 23*

Irons:Ping G25 5-Gap Wedge, Sr Flex, Vokey 56.14 Spin Mill NS Pro Reg, Flex

Putter: Bobby Grace Center Shaft 32"


Posted
FWIW, I agree that Cobra might be a better choice for one whose handicap is north of 20. Also, I might suggest that instead of fairway woods, you give low lofted hybrids a try. Hybrids are so easy to hit and so many very fine golfers are using these clubs. Many manufacturers make great hybrids but, since we're talking Cobra, they make some of the most popular. Good luck.

At the moment I am using Hybrids (21* and 24*) from fairways... I am also using them from tee most times. I was thinking at a 3W to tee off whenever I do not feel confident to tee off with driver.

In my Bag:

Big Bertha 460 11* Driver
Big Bertha 3 Wood
Staff Hybrid 21* Staff Hybrid 24* Big Bertha 08 5-SW Irons Lob Wedge Vokey Oil Can 60* Newport 2 Studio Style Putter Balls


Posted
At the moment I am using Hybrids (21* and 24*) from fairways... I am also using them from tee most times. I was thinking at a 3W to tee off whenever I do not feel confident to tee off with driver.

Your hybrids are similar in loft to a 4 iron and a 3 iron ( or 7 wood ). How well do you strike the ball with them off the tee or the fairway? If you have lots of confidence with your hybrids but are not so skilled with a 3 wood or other fairway woods, you may wish to sample a 15 degree hybrid. I suggest this only because hybrids seem so much easier to hit than fairway woods. But if you can hit a 3 wood as well as a hybrid, or just prefer it to a hybrid, then go for it. In any event, go for what gets you where you want to go most often.

shortgame85
In the Bag:
Driver: :TaylorMade: RBZ 9.5 Reg Flex
3 Wood :TaylorMade: RBZ Reg Flex
Hybrid: Ping G25 Hybrids 17*, 20*, 23*

Irons:Ping G25 5-Gap Wedge, Sr Flex, Vokey 56.14 Spin Mill NS Pro Reg, Flex

Putter: Bobby Grace Center Shaft 32"


Posted
I decided to buy:

Forgiving Drivers:

Mizuno MX-560 Ping G10 Cleveland HiBore XL Any of these would help improve your game, go for the high loft. For your 3 wood it would also be advisable to get same brand as your driver but then again it still would depend on what you're comfortable with. If you're having difficulty handling a 3 wood, try going for a 4 wood. Ping G10 series has a good 4 wood, so why not try out both their 3 and 4 wood to see which suits you better. Good luck in your selection! I'm sure you'll enjoy testing these clubs!

ISLAND PAR

In my Mizuno Bag:
TBD, MacGregor 4W(16*), 3H(20*),4H(23*), 5H(26*) Mizuno MX-900 6-PWAdams Watson 2010 Wedges (GW, SW, LW),Ping Wolverine Putter "But I thought you meant these golfers from our club when you said you needed SANDBAGGERS to help with the flood...


Posted
For your wedges i would suggest going for either 52 and 60 degrees or 56 and 60 degrees

I would definitely have to disagree, 60* wedges take too much time to get a hold of, but if you spend a lot of time practicing and hitting wedges especially then go ahead. But I would suggest getting a 52* and/or a 56*. And I also agree with the suggestion to get a

SQ SUMO, I have one, and it is extremely forgiving, and it just wants to go straight and is hard to make it do other wise.

Here's what I play:

Titleist 907 D2 10.5* UST ProForce V2 76-S | Titleist 906F4 18.5* Aldila VS Proto "By You" 80-S | Titleist 585H 21* Aldila VS Proto "By You" 80-S | Titleist ZB 4-PW TTDG S300 | Bob Vokey Spin Milled Oil Can 54.10 | Bob Vokey Spin Milled Oil Can 60.08 | Scotty Cameron Red X5 33" |


Posted
Your hybrids are similar in loft to a 4 iron and a 3 iron ( or 7 wood ). How well do you strike the ball with them off the tee or the fairway? If you have lots of confidence with your hybrids but are not so skilled with a 3 wood or other fairway woods, you may wish to sample a 15 degree hybrid. I suggest this only because hybrids seem so much easier to hit than fairway woods. But if you can hit a 3 wood as well as a hybrid, or just prefer it to a hybrid, then go for it. In any event, go for what gets you where you want to go most often.

My first 6 months of golf I played almost exclusively on Par 3 courses. When I started on regular courses a few weeks ago I just focused on gaining confidence with one club up at the time. Now I am in very good control with the 24* and 21* from both tee and fairway.

I tryied 3W only a few times at the range... I was thinking of setting 3W as next club to gain confidence with. Replacing 3W (and 5I) with hybrids it sounds to me like not going on the correct route... it is the same as a "chipper" I saw in a shop... it might be very effective but I see it as cheating like thing... (not sure I expressed my point clearly). Should I change my mind and go for Hybrid 18* or try 3W first and if I cannot gain confidence change approach? I am more concerned with Tee shots, as I think I will stick with 21* and mostly 24* from fairway for a while.

In my Bag:

Big Bertha 460 11* Driver
Big Bertha 3 Wood
Staff Hybrid 21* Staff Hybrid 24* Big Bertha 08 5-SW Irons Lob Wedge Vokey Oil Can 60* Newport 2 Studio Style Putter Balls


Posted

Thanks all for valuable help so far...

Thanks for encouraging me in spending money on golf gears as well!

In my Bag:

Big Bertha 460 11* Driver
Big Bertha 3 Wood
Staff Hybrid 21* Staff Hybrid 24* Big Bertha 08 5-SW Irons Lob Wedge Vokey Oil Can 60* Newport 2 Studio Style Putter Balls


Posted
Based on the fact that I will probably drop quite a few hp points in a year and gain sensibility to better feel differences from one club to another... I decided to put a price cap on the Driver and Wood. Also, I have a few limitations from specs available in the shop I selected.

My Choices are:

Driver Callaway Big Bertha 460 11*
3 Wood Big Bertha
Putter Scotty Cameron Studio Style

I still have a few things to decide... Any suggestion is more than welcome (also if you have any points against the selections above...)

1) Shaft Flex... At the moment I am not looking at swinging very very fast. What other things should I consider?

2) Putter lenght... I like very mutch the short one (33) any disadvantage compared to the longer ones?

In my Bag:

Big Bertha 460 11* Driver
Big Bertha 3 Wood
Staff Hybrid 21* Staff Hybrid 24* Big Bertha 08 5-SW Irons Lob Wedge Vokey Oil Can 60* Newport 2 Studio Style Putter Balls


Note: This thread is 6601 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.