Jump to content
IGNORED

Project X 6.0 v.s. Dynamic Gold S300

TempoIsKey

By TempoIsKey,
in Clubs, Grips, Shafts, Fitting

 Share
Note: This thread is 5327 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

TempoIsKey Well Established Member

TempoIsKey

I currently play the PX 6.0 shafts and have no complaints at all. I was just thinking about trying out some Mizuno MP-57's and most seem to come with DG S300 shafts. Any of you guys got any insight about the differences between the two shafts. Thanks in advance.
"The Zen philosopher Basho once wrote, 'A flute with no holes is not a flute. And a doughnut with no hole is a danish."

909 D3 Diamana Blueboard 63g
909 F2 3 Wood
MP-57's 4-pwIdea Pro 2 and 3 iron hybridsTour-W 52 deg wedge Tour-W 56 deg wedge2 Ball center shaft putterProV1
Link to comment
Share on other sites

2bGood Dedicated Member

2bGood

the s300 will be a little softer and find they fly a bit higher
Driver R7 Superquad NV 55 shaft or Bridgestone J33 460 NV 75 shaft
3 and 5 Wood X
Hybrid original Fli Hi 21* or FT 22*
Irons AP2
Wedges Vokey 52* - 8 , 56* 14, 60*-7Putter California CoranodoBall TP RedGPS NeoRange Finder- Bushnell Tour V2 When Chuck Norris puts spin on the ball, the ball does not...
Link to comment
Share on other sites

Happy Dragon Well Established Member

Happy Dragon

PX is a lighter shaft that launches the ball higher. DG is a heavier shaft at 130g and has a flatter trajectory. I personally like the DG better because you feel the weight of the club and easier for me to "drop it in the slot." People say the PX has a longer carry, but I haven't noticed a difference.

Driver= Titleist 909D3 9.5 deg
3 Wood= Titleist 909F3 15 deg
Hybrid= Adams Idea Pro Black 19 deg
Irons 3-P= Titleist 695 CB
Wedges= Titleist Vokey Spin Mill 54/10, 60/4Putter= Titleist Scotty Cameron Newport 1.5Ball= Titleist ProV1x, NXT Tour

Link to comment
Share on other sites

RC Great Member

RC

Having played both for some time in the last three years, I settled back on the DGs. The PXs seemed dead feeling in my case, just a little less punch and not quite the same kick point I like. Of course I have played DGs a lot more than any shaft, so it could be familiarity made the difference. Another guy I play with, who is much better than I am, tried the PXs, and he also switched back to DGs. Some like PX, others don't -- sorry no help.

RC

 

Link to comment
Share on other sites

andef Dedicated Member

andef

i can compare the px 5.5 to the dynamic golf s300 and the project x gave me a higher ball flight and about 5 yards longer carry. the s300 is quite a bit heavier than the px 5.5 so it gives a more boring trajectory
Link to comment
Share on other sites

hamletsdead Well Established Member

hamletsdead

I've got the Project X 6.0s in my MP57s and they are fantastic. I get plenty of height and distance with them, and don't notice them flying on a flatter trajectory relative to the DG S300s (which is have in my 67s). My SS is about 102-105 with driver, with a pretty quick transition, and the 6.0s are just right for me. I've got 6.5s in my travel set of X-forged, and those are a little lower-flying, but 6.0 is a nice balance. If you want it to go higher, just swing harder.

In my C-130 Cart Bag:

Driver: Titleist D2 10.5° Aldila R.I.P. 60
Woods Exotics CB4 15° Aldila R.I.P. 70
Hybrids Exotics CB4 17°, 22° Aldila R.I.P. 80 

Irons 4-PW MP-57 Project X 6.0, MP-29 PW

Wedges  Eidolon 52°, 60° Rifle Spinner 6.5

Putter Bettinardi BB12

Ball One Black

Rangefinder Nikon Laser 500"Golf...

Link to comment
Share on other sites

jpasiczn Member

jpasiczn

I concur. I hit the PX 6.0 on a set of TM r7 TPs for a while. Got my high ball flight under control. Nice launch profile. The dg s300s might get you hitting higher. Hit them in for a club fitter into a screen to find out how it will work for you.

R7 460 TP 8.5* Driver
Burner TP 3 wood
r7 Steel 5 wood
rac TP MB with FCM 6.0 shafts #4-PW
rac Fe2O3 52* 8*bounce Spin Milled 56.14* and 60.04* wedges Rossa Corzina putter ProV1x

Link to comment
Share on other sites

  • 2 weeks later...
plugged Dedicated Member

plugged

Looking at this thread, I am seeing half the folks saying the Project X 6.0 will fly the ball higher and the other half saying the same thing about the DG S300. I'm a little consued.

Driver: Burner 10.5 deg
5W: R7 18 deg
3H: Idea Tech
4-PW: MP-57
GW: Vokey 52 degSW: 56 degLW: 60 degPutter: Black Series 1 34"Ball: Pro V1

Link to comment
Share on other sites

GTV8 Member

GTV8

There is more that goes into trajectory than just the type of shaft. The clubhead design and individual swing characteristics also affect the ball flight. Like many people say, you have to hit them and see which performs best for you. I am a high ball hitter (not ballooning) and I get about the same height from DG's, PX's and SGI shafts I have hit.

Dymo2 str8-Fit 10.5 driver & Dymo2 3 wood
#3 & #4 Machspeed Hybrids
5-PW i701 irons
52 & 58 XFT Wedges
White Ice 2-Ball CS Putter One Vapor Sidekick push cartSonocaddie Auto Play GPS

Link to comment
Share on other sites

Note: This thread is 5327 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept
The popup will be closed in 10 seconds...