Jump to content
IGNORED

ukulele


bogeyhitter25
Note: This thread is 5610 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I had a good friend that joined a Ukulele club in San Francisco and he loved to sing and play the Ukulele, he's in Ukulele heaven singing and playing his Ukelele when he's not playing golf.

Titleist 910 D2 9.5 Driver
Titleist 910 F15 & 21 degree fairway wood
Titleist 910 hybrid 24 degree
Mizuno Mp33 5 - PW
52/1056/1160/5

"Yonex ADX Blade putter, odyssey two ball blade putter, both  33"

ProV-1

Link to comment
Share on other sites


I started on a Uke as a very young guy, then transferred to a classical guitar when my hands grew large enough. The Uke normally has the same tuning as the bottom four strings of a classical guitar (DGBE), where the 6 string guitar is normally tuned EADGBE.

RC

 

Link to comment
Share on other sites


How are they messed up? Broken? If so, you can go to a music store and buy strings, or subsitute the bottom (meaning higher pitch) four strings of a classical guitar (not steel strings, Ukes use nylon type strings. Talk to the store clerk -- but call ahead to make sure they have Uke strings or classical strings. You can also order strings online from sites like "Stringsbymail." You might email such sites beforehand to make sure you are getting what you need.

You will also need a tuning pipe, pitch fork, or electronic tuner (or you can find tuning notes on some internet sites.) At first strings will not hold pitch. It takes several days for them to settle in and you will need to tune every day you play your new Uke (sometimes after each "tune" you play. Each time I put new strings on my classical, I have to tune every few minutes for the first several days. When your strings stop needing daily tuning, it is time to change strings. People who play a great deal change strings often, some as often as every 10 to 14 days. Most people can go much longer than that.

Hope this helps.

RC

 

Link to comment
Share on other sites


+1 for what RC said. Musicians friend has a good selection of uke strings. They're not hard to change on your own but they will have a significant stretch period before they'll hold their tune. I like to pull on mine before tuning to help quicken the stretching process. Good luck and have fun. Youtube has a ton of uke lessons that should get you on your way pretty quickly.

What's in my Edge stand bag
G10 10.5*
Z-Steel 3 wood 14.5* 403-AD 18* & 21* Hybrids Burner 09 4-pw DGS300 Z TP 52* & RAC TP Black 56* White Steel 2 Ball SRT 35" Tour B330s

Link to comment
Share on other sites


Note: This thread is 5610 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • When I lived in Oregon my friend had a rule. It could only be 2 of the following 3 items for us to play. If all 3 we’d skip.    1. Windy (20+) 2. Rainy (needs to be steady, rain in Oregon is pretty common) 3. Cold (less than a high of 50) This was a pretty solid rule.    
    • Day 74: Worked on priority piece, full swing for about an hour this evening after dinner. Really need to exaggerate “hitting to right field feel” more than I think to produce slight push draw ball flight. 
    • Day 170 - Got some good work in on the short game, as well as more work on my priority piece. 
    • I searched around but didn’t see any other threads on this so I’ll put it here. I work in the laser industry and one of the applications has been additive manufacturing. The main market for the past 10 years has been SpaceX and the space industry and some medical applications. The new one I saw this week is 3D printing irons. Cobra and the company that they are using is marketing these irons pretty aggressively.  In talking with the folks in the booth at the trade show, the claim is that they can gain strength but reduce the weight to put it exactly where they want. The print of the iron is very cool. Mostly everything behind the face is a thin metal lattice and then in the heal and toe is a block of tungsten for weight.  I am old enough to remember the arguments about forged versus cast irons. I wonder if folks here will pay a bit more to get 3D printed irons.  They have a booth here where you can hit them but I hate lines and the line to do it is always long. I go again tomorrow, and if the line isn’t too long I’ll give it a try and report back.    Here are some pictures (I had some trouble uploading, I’ll try later)      
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...