Jump to content
Note: This thread is 6932 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

If you have ever wonder how to build your own putting green, take a look at this turf website. It walks you through the whole construction process on green, tee box, and sod wall bunker construction. www.kinipela.ca

  • Administrator
If you have ever wonder how to build your own putting green, take a look at this turf website. It walks you through the whole construction process on green, tee box, and sod wall bunker construction.

Thanks. That looks nice... and the biggest expense is the greens mower, I guess...

I hope you stick around. Welcome to the forum...

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

To build a USGA specs green is extremely expensive and time consuming.My geen is 1000 sq feet and it was a LOT of work.

In my new FT carry bag
FT-9 Tour nuetral 9.5
FT-15 degree 3 wood
Fussion Hybrids #2&4
Fussion irons with Grapholoy Pro launch Red shafts56&60 Cally X forged wedges with Red shaftsSG9 putterCally I ballBushnell Meadealist range finder


If it was easy, everyone would have one. It all comes down to what you want in a putting surface, you get what you give. You are right when you say it takes a lot of time to maintain healthy turf, but if you are into it, it's well worth it.


I'm going to probably do an artificial one next spring... Too much maintenance for a real one.

I have an artificial one and I'm glad I didn't build a real one, I travel too much to baby a real one.

Awards, Achievements, and Accolades

Chopper;You can build your own by making a base of 80/20 mix 16 inches deep over a regular lawn that has been scalped.This will work well up to 1000sqft.The USGA digs down 3 ft and has multiple layers of gravel and sand and now even running water pipes.My green is L93 bent and rolls in the spring and fall at 12.5 to 13 on my stimp meter.

In my new FT carry bag
FT-9 Tour nuetral 9.5
FT-15 degree 3 wood
Fussion Hybrids #2&4
Fussion irons with Grapholoy Pro launch Red shafts56&60 Cally X forged wedges with Red shaftsSG9 putterCally I ballBushnell Meadealist range finder


  • 4 weeks later...
Hey Everardo,
How big is your putting green and what did you use for the putting surface?

Peter Valone
Home Course:Mill Creek

"The invisible opponent whose tangible form is the card and pencil; the toughest opponent of them all -- Old Man Par." Bobby Jones


Chopper;You can build your own by making a base of 80/20 mix 16 inches deep over a regular lawn that has been scalped.This will work well up to 1000sqft.The USGA digs down 3 ft and has multiple layers of gravel and sand and now even running water pipes.My green is L93 bent and rolls in the spring and fall at 12.5 to 13 on my stimp meter.

The root zone ratio and the depth is great to work with. I don't know about scalping the old turf then adding 16" of the growing medium on top. Think of the thatch and the root system of the scalped turf, it would create a layer effect and could create a drainage problem, not good. You are far better off to sod cut the old turf out, then put down your root zone mix. If you don't want to put in subsurface drainage make sure you have at least 1% slope on the surface of the green. This will ensure no puddles on the green after a heavy rain, the excess water will flow off. If you go to my website you will see the green cavity, the pea stone layer, and the root zone mix going in, then the Poa cores, the total depth is 18".

I don't know where you got your information about building a USGA putting green, but you don't have to dig down 3' to create the green cavity? I have never seen or heard of pipes with water in them running underneath a putting green, too much potential for something to go wrong i.e. broken pipe washing away the green or if you had to do a repair, you would have to dig up a section of the green to get access to the pipes. Irragation pipes will run around the outside of a green, but never underneath. Do you find it hard to maintain the health of your green keeping the stemp meter at 13 throughout the growing season, especially when the heat of the summer comes. I would be interested to hear about your Turfgrass cultural practices and if you use wetting agents. It sounds like you have a lot of fun with your green and that's important when you think of the time spent caring for it. Take care - Chopper.

Chopper;I have posted pictures of my green on this site and have been using L93 bent pure with no poa for 6 seasons.I only cut it short during the growing season and not the heat of the summer as not to strain it.As far as the water pipes under the turf they use these to cool the grass in the summer at places like Pinehurst.Alot of the courses now din't even airearate anymore they have water airation machines that syringe massive ammounts of water into the root system and leaves no damage to the green.Here on long island they only core aireate twice a year with 90/10 top dressing,spring and fall.They then Water aireate twice more during the summer.I use a 4x8 sheet of plywood with 1 inch round 3 inch long wood screws spaced 4 inches apart as my core aireator.Just lay it down and pick it up and move on.I use Greens grade fertilizer 28 4 6 Twice amonth in he spring and once a month during the summer.In the spring I use Heritage as my main chemical as it is good for almost all ailments.It is 400.00 but well worth it.Over the Years Ive been hit with Pythium Blight,Takeall patch and dollar patch and have had to scramble to get the chemicals i needed to cure the problem.By now most of the local courses know me cause I have picked all of thier brains at one time or another.As far as how i got my info for the bed of my green the web site was Real Green .com from indiana they also sold me my first mower{push}.I now have a 21" Mclanes 10 blade greens mower from California.Its a lot of work but the Mrs and I love it so we work it together.

In my new FT carry bag
FT-9 Tour nuetral 9.5
FT-15 degree 3 wood
Fussion Hybrids #2&4
Fussion irons with Grapholoy Pro launch Red shafts56&60 Cally X forged wedges with Red shaftsSG9 putterCally I ballBushnell Meadealist range finder


Note: This thread is 6932 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 153: putted for a while using the 2 cups drill inside. Working on bead primarily. Contact was really good. 
    • Day 8: 12/17/2024 Okay I took my new PPJ swing thought to the range today. I wasn't sure I was quite ready to do so, but I'm glad I did.  When I got it right it was good... really good. When I got it wrong it was a major fail. I hit lots of really ugly ones. But I didn't let that deter me. I stayed committed and focused on the PPJ and I avoided any temptation to go back to what I was doing before just so that I could "look" better at the range. I'm pretty excited about what I saw when I got it right.  I hit the 6 iron mostly (nearly all block work today). I also hit about 6 balls each with the PW, 8I, 5W and Driver. Those had varying degrees of success. I did crack one drive that let me feel and see what the changes will look like once I get fully trained.  Anyway, I'm going to go back to the mirror work for a couple of more days before bringing it back to the range. I do feel like if I can get this right my swing will improve a lot. So I think its worth the effort. I liked the way it looked on GEARs when I get it right, and I like the results I got at the range when I got it right. Now the goal is to work towards getting it right more often. 
    • So I think it's that they can't just bend the shaft or hosel to get it to a new lie angle. They adjust that and it changes the weighting, so they have to then adjust all the weights to get it balanced again. I get the impression that it's a bit of an iterative process and they do it all in the US, so they're paying US labor costs to build it and make it work how it's supposed to. Whether you believe in the tech or not, I think that's a true statement.
    • Ah, the old EE in the backswing move. Chest going back and staying down doesn't help.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...