Jump to content
Note: This thread is 5914 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I bought a scotty cameron circa 62 #2 putter with the black oxide finish recently. I played a couple and a few practice sessions, and immediately after the first round, some rust began to appear on the sole as well as the face and even a little on the hosel.

When i bought the putter, it didnt with the silicon cloth, and i just received one from another source today. So i'll be wiping down the putter now.

However, there is a little bit of rust on it...and although it doesnt really look that bad (i can put up pictures later....at work now) i wouldnt mind getting it off.


Anyone else have black oxide finish on their putter or have any idea how to get rid of the rust?

TMX Carry Bag
Tour Burner 9.5*
Burner 3W 15*
Burner Rescue Hybrid 19*
r7 TP 4i-SW Dynamic Gold S300s 60* CG-14 Circa 62 #2 & Studio Stainless Newport 2 Pro V1x


friendly bump

TMX Carry Bag
Tour Burner 9.5*
Burner 3W 15*
Burner Rescue Hybrid 19*
r7 TP 4i-SW Dynamic Gold S300s 60* CG-14 Circa 62 #2 & Studio Stainless Newport 2 Pro V1x


what you need to do is wipe it down with baby oil to preserve it.
i had the tiger woods putter and got a tiny bit of rust, very little. i stopped playing with it because it is worth a lot of money. anywayz if you play if its raining dont put it back in the head cover. the moisture in the head cover is going to promote rust. so after your round just leave it out, but oil it down with baby oil.
glad i can help. +1 my rep please
  • Upvote 1

Driver: :tmade: 2017 M1 9.5° / 3-wood: :tmade: AeroBurner 13.5° / Irons: :mizuno:  MP-69 (3-PW) / Wedges: :titleist: SM6 Vokey 50°, 54°, 58° / Putter: :titleist: Scotty Cameron Newport with SuperStroke 3.0 slim, 50g counterweight / Balls: :bridgestone:  Tour B330-S

NLC Cup 2017 Champion / Grand Master's Cup 2017 Champion / TDR Cup 2017 Champion / DTG Celebration Cup 2017 Champion

Awards, Achievements, and Accolades

Hmm..is it black oxide or gun blue?

I WOULD NOT use baby-oil and instead HIGHLY recommend SILICONE SPRAY. I've been SC's for a bit and that's what we all use on the gun black finish. BO finish sounds aftermarket..

I have a TEI3... baby oil doesnt do crap

you need a silicone spary lubricant but it needs to be a very specific one, anything that is oil based (if it smells oily, like wd40 then DONT use it)

an oil based lube will actually adhere chemicals (ie fertilizers) from greens that will ruin your putter with putter rust

here is a great product - use it - its an electrical and food based grade lubricant that is perfect for putter care

http://www.idealtruevalue.com/servlet/the-13365/Detail

this is the only product you should use

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


what you need to do is wipe it down with baby oil to preserve it.

dont ask people to give you rep points, haha

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Hmm..is it black oxide or gun blue?

with the rust coming that quickly its definitely the stock gun blue finish...

its hard to keep this putter in great condition, hence the reason they made the series one year later in the charcoal finish but the gun blue is just more attractive than the charcoal use the product I mentioned above and this will be a gamer that will last for years to come

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


  • 2 months later...
i'm bringing up this old thread because i just got my putter back the other day from getting refinished with S.Cameron. it ended up taking about 2.5 months to get back.


anyways, i'm thinking about getting that silicone spray mentioned above but not really sure what to do with it.

anyone have any links or maybe more detailed explanation about how to care for that black oxide finish?

the people at SC aren't very helpful. They simply suggest to wipe it down after each round but that doesn't seem to do the trick.

I remember finding a link awhile ago explaining the whole maintenance process but i can't seem to find anything similar online now.

any thoughts?

TMX Carry Bag
Tour Burner 9.5*
Burner 3W 15*
Burner Rescue Hybrid 19*
r7 TP 4i-SW Dynamic Gold S300s 60* CG-14 Circa 62 #2 & Studio Stainless Newport 2 Pro V1x


Heres what ive always done with my circa,

i put the cloth in the headcover, that way it always gets "wiped down" whenever i put it away, i also wipe it down when iget home if its been a rainy day. i have never seen any forms of rust on either of my circas.

|Callaway FT-9 Tour Neutral 9.5 Diamana BlueBoard| TaylorMade TourLaunch 14.5 Matrix Ozik F7M2 X| Adams Idea Pro 20 Matrix Ozik Altus X| Mizuno MP-32 4-PW TTDG S300|Titleist Vokey 50| Tour Issue Titleist Black Ni Vokey SM 54|Callaway X Forged 62 || Kirk Currie Brazos| Callaway Tour IX/...


you need a silicone lubricant, as mentioned before never use WD40.

one nice trick is to apply lubricant into the headcover so you'll constantly lube up the putter each time it is covered.

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


this spray work on the oil can vokey wedges too to help keep them from rusting?

r7 draw driver 9.5* stiff shaft
Big bertha 06 irons, 4-sw
56*vokey spin milled 10*bounce
Victoria ;)
tp black balls cart bagJack nicklaus Golden Bear 52* and 60* wedgesWalter hagen: 3 wood 5 wood 4 hybrid stiff shaft"I don't say my golf game is bad, but if I grew tomatoes they'd come up sliced."www...


yes, unfortunately you would need to treat the wedge as soon as you buy it

something I failed to do

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


just came in today lol =] so why treat it first what benefit does that have? would it matter as long as its completely dry and all?

r7 draw driver 9.5* stiff shaft
Big bertha 06 irons, 4-sw
56*vokey spin milled 10*bounce
Victoria ;)
tp black balls cart bagJack nicklaus Golden Bear 52* and 60* wedgesWalter hagen: 3 wood 5 wood 4 hybrid stiff shaft"I don't say my golf game is bad, but if I grew tomatoes they'd come up sliced."www...


whenever you play with the wedge, go home... warm water and soap, clean and dry completely

spray with the silicone spray and leave out of your bag

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


sweet deal ill def have to do that, now the soap what type of soap should i use? does it matter? like dish soap? hand soap? like a bar soap? i know certain ones are bad on certain things

r7 draw driver 9.5* stiff shaft
Big bertha 06 irons, 4-sw
56*vokey spin milled 10*bounce
Victoria ;)
tp black balls cart bagJack nicklaus Golden Bear 52* and 60* wedgesWalter hagen: 3 wood 5 wood 4 hybrid stiff shaft"I don't say my golf game is bad, but if I grew tomatoes they'd come up sliced."www...


I use handsoap... like whatever my mom buys for the bathroom

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Note: This thread is 5914 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...