Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5669 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Has anyone used these? How do you like them. I currently have the ping i10 S400 shafts, there just to heavy for me and too stiff.

Has anyone tried playing with both of these shafts, prefer one over the other. Any input would be good. I have an opportunity to switch out sets.

In my Bag:

Driver- Launcher Driver 9.5 Loft, Stiff Shaft
Woods- G2 3- Wood
Hybrid- Halo 2 Iron G10 3 Iron HybridIrons- 4- Pitching i10Wedges- 52, 56 and 60 Degree RACPutter- 2 Ball


Posted
try true temper high launch shafts they are realy light and you could easiy find them in regular flex.

Burner 10.5* driver
Burner 3 wood GD Pershing Shaft
Burner 5 wood GD Pershing Shaft
Tour Burner irons
Rac black 52* Rac satin 60* Red x 3 pro v1


Posted
thanks for the reply.

Not sure if I want to go too light, I have an opportunity to switch my set for another with the AWT.

The S400 are just to heavy and too stift. I like the S300, which makes me think it is more of a weight thing rather than stiffness.

Will the ones you mentioned be too light?

In my Bag:

Driver- Launcher Driver 9.5 Loft, Stiff Shaft
Woods- G2 3- Wood
Hybrid- Halo 2 Iron G10 3 Iron HybridIrons- 4- Pitching i10Wedges- 52, 56 and 60 Degree RACPutter- 2 Ball


Posted
Shaft weight info

AWT = Ascending Weight Technology, come in Soft Regular, Regular, Stiff, Extra Stiff. The shafts are lighter in the long irons and the weight gradually increases into the short irons. The differences in weight will give a "flighted" ball flight where the long irons will encourage a higher ball flight and short irons be lower and more control.

Posted
Do you want a higher ball flight or a lower, more piercing ball flight. I currently play i10's and the ball flight is WWAAAYYY to high for me, and right now I play the AWT's. So if you want a higher ball flight go with the AWT's, if you want a lower ball flight go with the ZZ-65's (both stock offerings in PING irons.)

Here's what I play:

Titleist 907 D2 10.5* UST ProForce V2 76-S | Titleist 906F4 18.5* Aldila VS Proto "By You" 80-S | Titleist 585H 21* Aldila VS Proto "By You" 80-S | Titleist ZB 4-PW TTDG S300 | Bob Vokey Spin Milled Oil Can 54.10 | Bob Vokey Spin Milled Oil Can 60.08 | Scotty Cameron Red X5 33" |


Posted
Umm if im u ill try the project x shafts. Its equally weighted and it is lighter then the true temper

Driver: Titleist D2, 9.5* loft, Aldila VooDoo XS, IOMIC Grip Red
Fairway: Titleist 906 F2, 13* and 18* loft, Fujikura 757 Tour Spec. XS, IOMIC Grip Black
Irons: Callaway Tour Authentic Prototype 3-9, Project X 6.5, IOMIC Grip Black
Wedges: Titleist Vokey 48*, Titleist Proto Vokey 52*, Titleist...


Posted
I guess my problem with my current S400 shafts is that I have trouble getting my club head back due to the weight, I am fine with my scoring irons, it is more of an issue with my 4, 5 and 6 iron.

Personally I would like a higher trajectory, but not to excessive. I just feel the s400s are just to hard for me to hit, yes it could be my swing as well, just dont feel comfortable with the heaviness on them.

I do like my 7 iron on with the s400, I feel I have more control with my shot, which I would rather have then the distance, where as the 4-6 iron I am looking for some control but distance as well.

In my Bag:

Driver- Launcher Driver 9.5 Loft, Stiff Shaft
Woods- G2 3- Wood
Hybrid- Halo 2 Iron G10 3 Iron HybridIrons- 4- Pitching i10Wedges- 52, 56 and 60 Degree RACPutter- 2 Ball


Posted
I play with x-stiff awt's on my i-10's. I wouldn't trade them for the world. my swing speed is up over 110 though, so depending on that your swing speed might wanna look at a different flex.

The one complaint I have is that the shaft really magnifies the hitches in your swing. If you pull the club head through before your arms are ready the shaft is gonna follow your lead and once in a while I end up pulling the ball left, straight, but left. That might have something to do with the stiffness though.


overall, great shaft. highly recommended.

G10 10.5* TFC 129 S
906F4 15.5* Aldila VS Proto S
Burner Rescue 19* ReAx Superfast S
I10 3-LW AWT XS
Karsten Series Anser 2 35" Pro V1 or HX Hot BiteC'mon single digits!


Posted
My swing speed is more around 100-110 with my irons. I think the stiff would work out for me, I will try them first and see which one feels more comfortable.

In my Bag:

Driver- Launcher Driver 9.5 Loft, Stiff Shaft
Woods- G2 3- Wood
Hybrid- Halo 2 Iron G10 3 Iron HybridIrons- 4- Pitching i10Wedges- 52, 56 and 60 Degree RACPutter- 2 Ball


Posted
You have a 100-110 mph swing speed with you IRONS?! Wow dude, you are a BEAST!!!!!!

Here's what I play:

Titleist 907 D2 10.5* UST ProForce V2 76-S | Titleist 906F4 18.5* Aldila VS Proto "By You" 80-S | Titleist 585H 21* Aldila VS Proto "By You" 80-S | Titleist ZB 4-PW TTDG S300 | Bob Vokey Spin Milled Oil Can 54.10 | Bob Vokey Spin Milled Oil Can 60.08 | Scotty Cameron Red X5 33" |


  • 2 years later...
Posted
Do you want a higher ball flight or a lower, more piercing ball flight. I currently play i10's and the ball flight is WWAAAYYY to high for me, and right now I play the AWT's. So if you want a higher ball flight go with the AWT's, if you want a lower ball flight go with the ZZ-65's (both stock offerings in PING irons.)

Well that explains the continued high ball flight I get. I swear it is obnoxious. They just sail on me. I may have to send my irons in to ping an get the ZZ-65 shafts put in them.

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

Note: This thread is 5669 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.