Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6490 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Whats the difference between cord grips and velvet or polymer grips? I have had some slippage on the range and even in tournaments and I wanted to know if paying the extra money is worth getting cord grips.

In my Bag-

Driver: 909 d3 Matrix Ozik XCON 6 stiff
3 wood: 906 f4 Graphite Design YS-6+
Irons: r7 tp Dynamic Gold S300Wedges: vokey spin milled Putter: tei3 newport 2


Posted
Just buy one, put it on on club, and play a few rounds with it and see if you like it. Better yet, just hit a bunch of balls at the range with that club. If it doesn't tear through your hands or glove then it might be for you. If you don't like it then you are only out about $10 for the cord grip and one to replace it.

I don't know if they are better or not, personally I don't like them. I tend to grip the club pretty hard sometimes and they will give me a blister or two.

I will judge my rounds much more by the quality of my best shots than the acceptability of my worse ones.


Posted
Cord grips TEAR through my hands. 5 swings and I have a nice big blister.
TAYLORMADE FOR LIFE!
DRIVER: R5 Dual TP 10.5* Matrix Ozik Stiff
3 WOOD: Tour Burner 14.5* Matrix XCon5 Stiff
HYBRIDS: Tour Burner Hybrids 20* 23* Matrix XCon5 Stiff
IRONS: MB Smoke 5i-PW Project X Flighted 6.0WEDGES: Z TP 50.06(bent) 54.10 60.06PUTTER: Newport Studio Select 33.75"BALL: TP...

Posted
I have cord grips and like them. Yes, they are harder on the hands, but I don't get blisters from them. No slipping happens with them, they are very firm which I like, and they last a long time.

Ping G 410 10.5 ˚ Driver Ping Tour Stiff Shaft
Ping G 410 14.5˚ 3 Ping Tour Stiff Shaft
Ping G 410 19˚ Ping Tour Stiff Shaft
i 500 irons 4-UW 1/2 inch over, blue dot, NS Pro Modus 105 Stiff Shafts
Ping Stealth Wedges Wedges  54˚ 58˚

Scotty Cameron Studio Select Newport 2 34" 


Posted
I prefer cord grips over all others. I can't state this strongly enough.

I have no issues with them tearing up hands or gloves. Gloves, imho, are a consumable with a limited life. When they wear after several rounds then I'll make them "range" gloves until holes develop and then they are trashed.

The Tour Velvet Cord and the Crossline Cord are my favorites.

I fully believe they are worth every $$$. For me, they outlast regular grips three times as long. Also, the humid conditions of playing around here make grip selection more of a consideration.

I generally have to special order my sticks due length& lie needs....I've always requested cords at that time, too. Never been charged more for this and always been pleased. Ping's cords are super!!!!!
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
I simply do NOT like cord grips. THey are brutal on gloves and my hands. Yet, I dont feel they are any more stable than my Winn Grips or even the lamkin wraps I had previously.

Posted
chords are brutal if you're not used to them or don't play often like people have said .. I never liked them. I always used golf pride tour wraps .. just last week I finally splurged on some Wynn Grip Polymer Chords (partial chord) .. they're soft yet still tacky .. and aren't brutal on the hands .. I used one glove all day today in 90 degree heat and didn't have one shot slip out of my hand .. it was nice.

Sean

What's in the bag:
Driver: TaylorMade R11S 9 degree.  Set to upright 8 degree.  Aldila RIP Alpha 60s X flex shaft.

3 wood: TaylorMade 13 degree RocketBallz (coming shortly).. X Flex Matrix X Conn.

Hybrids: 2iron / 4iron Taylor Burner Rescue.

Irons: 5 - PW 2008 Model Year Titleist AP2

Wedges: 49*, 54* 60* Cleveland 588 Rusties.

Putter: Scotty Cameron Kombi Long.

Balls: Titleist Pro VX

Bag: Titleist Black / Red Staff


Posted
I think cord is the way to go... I always find with just tour velvet my grip slips if I'm not wearing a glove. The new decades are the way to go though with only half of the grip being cord.

in the bag

Driver: 909D2 9.5° Oban Devotion Shaft

3 Wood: G10 15.5°
Hybrid: 3dx RC 20° Ironwood 

4-PW: MP-57's S300

Wedges: 51° MP-T Black Nickel 56° Vokey Spin Milled 

Putter: Tracy II 35" Iomic Grip 

Ball: Pro V1x


Posted
I simply do NOT like cord grips. THey are brutal on gloves and my hands. Yet, I dont feel they are any more stable than my Winn Grips or even the lamkin wraps I had previously.

I still have some clubs with Golf Pride Victory half-cords.

When I pick them up, I just remember pain and the club slipping out of my hands because the grip is way too firm for me. Golf Pride Tour Wraps for me on every club and I now play without a glove. (I have a leather grip on my putter - wouldn't have it any other way)

Best, Mike Elzey

In my bag:
Driver: Cleveland Launcher 10.5 stiff
Woods: Ping ISI 3 and 5 - metal stiffIrons: Ping ISI 4-GW - metal stiffSand Wedges: 1987 Staff, 1987 R-90Putter: two ball - black bladeBall: NXT Tour"I think what I said is right but maybe not.""If you know so much, why are you...


Posted
Besides the roughness on the hands, do cord grips prevent slippage? My hands are really sweaty and I have had clubs slipping out of my hands launching out into the range. I have always had this problem, and just wondered if cord grips will help. Yeah, I don't care about the roughness. For some reason I just don't get blisters. Is cord the way to go to prevent slipping?

In my Bag-

Driver: 909 d3 Matrix Ozik XCON 6 stiff
3 wood: 906 f4 Graphite Design YS-6+
Irons: r7 tp Dynamic Gold S300Wedges: vokey spin milled Putter: tei3 newport 2


Posted
Besides the roughness on the hands, do cord grips prevent slippage? My hands are really sweaty and I have had clubs slipping out of my hands launching out into the range. I have always had this problem, and just wondered if cord grips will help. Yeah, I don't care about the roughness. For some reason I just don't get blisters. Is cord the way to go to prevent slipping?

It's a trade off.

The cords create friction. However, to keep the cords in, the grips are made out of a very firm rubber compound.

Best, Mike Elzey

In my bag:
Driver: Cleveland Launcher 10.5 stiff
Woods: Ping ISI 3 and 5 - metal stiffIrons: Ping ISI 4-GW - metal stiffSand Wedges: 1987 Staff, 1987 R-90Putter: two ball - black bladeBall: NXT Tour"I think what I said is right but maybe not.""If you know so much, why are you...


Posted
I've tried a few of the cord grips. They were pretty rough on my hands. ( I guess that I'm a wuss). I have found that the Golf Pride Tour Wrap is best for me. They are fairly cheap and are very soft & tacky.


Joe

In the bag at this point

Adams RPM 9.5°
Adams Tightlies Strong 3 16°
Adams Tightlies Strong 7 24°Hogan CFT Hybrid 3Hogan CFT irons (5-P)Alien SWCameron Futura 2 35"Top Flight Gamer


Posted
Besides the roughness on the hands, do cord grips prevent slippage? My hands are really sweaty and I have had clubs slipping out of my hands launching out into the range. I have always had this problem, and just wondered if cord grips will help. Yeah, I don't care about the roughness. For some reason I just don't get blisters. Is cord the way to go to prevent slipping?

I play Lamkin Crossline Cords. The firmness gives better feedback off my blades. But, in terms of "slippage", the grips doesn't really hold much better to sweaty hands than the Lamkin Crossline non-cord version.


Posted
Go demo a club that has a chord grip on it. Hit it a few times and then see if you like the feel of the chord during your swing. Having a chord grip does not = a better grip. A grip that you like and fits you = the best grip.

Whats in my Warbird Hot Bad:

Driver: 907D1 9.5 - 65-S Aldila VS Proto --- FT-IQ coming soon?
2 Hybrid: Rescue mid-TP 16 deg
3 Hybrid: Rescue TP - HC Tour Only Model 19 deg - DG X-1004-PW: 695CB Irons - Project X 6.0Wedges Vokey SM58, Vokey SM54, Vokey 250Putter Futura PhantomWhere I WorkMy...


Posted
Yeah. Thanks.

In my Bag-

Driver: 909 d3 Matrix Ozik XCON 6 stiff
3 wood: 906 f4 Graphite Design YS-6+
Irons: r7 tp Dynamic Gold S300Wedges: vokey spin milled Putter: tei3 newport 2


Note: This thread is 6490 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Popular Now

  • Posts

    • He's using a driver swing, while I used the iron swing. Bryson goes from about 65° B to 15° B, hence the 50°. If you bend your right elbow, you're going to pull your hands across your chest some. Conversely, if you abduct your right arm and hold onto a grip with your left arm, you can see how extending the right elbow as we do in the golf swing during the downswing will "pull" the right shoulder/humerus forward (adducting it, as going from 65° to 15° of abduction is). Even people who pull their right shoulder WAY too far around them eventually get it "back in front" when their right arm/elbow extends. So, such a motion shows up as shoulder adduction even though the movement that causes it is just widening the trail elbow. The left hand on the grip almost "pulls" the hands forward as the left arm can't stretch much (there's some shoulder protraction, but that's almost maxed out at P4).
    • That makes no sense at all.  so, I watched that Instagram. Here is a summary...  Bryson.... Address: Trail Shoulder 0 degrees adduction. P4: Trail Shoulder 65-deg abduction. Impact: Right shoulder 15-deg abduction. P9: 10 degrees adduction. Rory... Address: Trail Shoulder 16 degrees adduction. P4: Trail Shoulder 26 degrees abduction. Impact: Right shoulder 0 degrees abduction.  P9: 18 degrees of adduction.  DJ... Address: Trail Shoulder 4 degrees adduction. P4: Trail Shoulder 42 degrees abduction. Impact: Right shoulder 2 degrees abduction.  P9: 15 degrees of adduction.  Their point is that arm doesn't stay on the trail side. That the arms have to get across the chest from P4 to P9. I mean they do. What matters is the rate of which it happens relative to the position of the swing. The trail shoulder at P9 is not abducted a lot. The range of that total abduction movement is like 40 to 70 degrees. Bryson might be an outlier. Rory might be an outlier as well.  A couple of points.  1. None of them had any adduction at impact. So, this tells me the trail arms stays on the trail side of the body at impact. Is it moving towards lead shoulder, yes. It doesn't happen till post impact. The right side of the body is moving towards the target, so the arms don't have to as much as people think.  2. Trail shoulder adduction from Impact to P9 is 18 to 25 degrees.  3. P9 adduction of the trail shoulder is only about 2 to 12 degrees more adducted than at address. The arms/hands stay in front of the chest a long-time post impact. If Rory, from his address position just rotated his body towards the target and raised up his arms so he is at P9. He basically didn't have to move his trail arm further across his chest than where he started at address. Visualize that for a bit. I bet for people who tend to stall and drag their arms across their body to hit the ball, that would emphasize how much the arms stay in front of the body and how much you have to turn.             
    • Do you know how Manavian is measuring his shoulder adduction-abduction that purports to demonstrate 50 degrees or motion in Bryson's downswing? I know the broader biomechanics research/scientific literature on this suggests shoulder adduction-abduction is only a modest contributor of force generation in the downswing, so I'm definitely not convinced by anything he's arguing, I'm just curious how different people can be claiming to use ostensibly the same "data" to tell a much different story.
    • I have an update… I don't have much of a response, because the fact that they would ADD the numbers for the lead and trail shoulder together… I mean, wow. I was giving them too much credit. Nobody would think to assume they were doing THAT. That's beyond comical. One of the biomechanists I talked to put it this way: "So if I squatted down and went from 180 to 90 deg knee angle, then I would say 180 deg range of motion because I have two knees?" I'd type more (maybe), but honestly, I'm laughing a bit too hard. 🤣 Update: Mini Manavian blocked me on Instagram, so I cannot see his post showing Bryson with about 50° of range of motion (with a driver) from P4 to P7, and 75° only if you go out to the mid-follow-through. What a terrible loss for me. 😉 
    • Thanks, interesting to read. The swing is definitely very timing dependent. I hit it consistently I guess but consistently bad.    
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.