Jump to content
Note: This thread is 6803 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I was hoping to get some help since my pro doesn't return for the season until next month. I am a new golfer and it seems like I've always struggled with the different angle of attack for an iron in comparison to a wood. This year I've gotten to the point where I only use my irons, typically teeing off with a 3 or 4 iron, due to a lack of confidence in my 5 wood. Please note (I don't yet own a driver or 3 wood. This is based upon recommendations from others.) I actually haven't played bad this year but I obviously don't have the distance that I really need.
As I understand, please correct me if I'm wrong, one should hit down and through when using an iron. While with a wood, the path is more horizantal (swing image: striking a nail into the back of the ball). Finally I also understand that the angle of attack would be from below (upwards) when utiling a wood to hit a ball on a tee.
Is this all correct? If so, how can I ensure a smoother swing transition from wood to iron? Or is it something I just need to practice?

In the bag
Driver: HiBore (10.5, graphite - regular)
Irons: MX-23 (steel - regular)
Wedges: Vokey (56, 60 degrees)
Putter: White Hot 2-Ball Blade


  • Administrator
I was hoping to get some help since my pro doesn't return for the season until next month. I am a new golfer and it seems like I've always struggled with the different angle of attack for an iron in comparison to a wood. This year I've gotten to the point where I only use my irons, typically teeing off with a 3 or 4 iron, due to a lack of confidence in my 5 wood. Please note (I don't yet own a driver or 3 wood. This is based upon recommendations from others.) I actually haven't played bad this year but I obviously don't have the distance that I really need.

Some people do it solely with ball position. If you imagine the arc of the clubhead as bottoming out a few inches behind your front toes, then you can see why you place irons back in your stance (where you're hitting down), a 5-wood about at the bottom (flat), and things on tees forward in your stance (to catch it on a slight upswing.

The answer may be - and in fact probably should be - as simple as that.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Some people do it solely with ball position. If you imagine the arc of the clubhead as bottoming out a few inches behind your front toes, then you can see why you place irons back in your stance (where you're hitting down), a 5-wood about at the bottom (flat), and things on tees forward in your stance (to catch it on a slight upswing.

That's just the way I see it. So, it doesn't matter which club you have in your hand, the fundamental swing should be the same. You've got to keep things as simple as possible - the game is hard enough as it is ! The angle of attack at impact then depends on where the ball lies in relation to the bottom of the arc made by the clubface. Obviously, the further back the ball (towards the back foot), the steeper the attack angle at impact and the more turf will be taken AFTER the ball is struck. If you aren't taking quite a bit of turf with the short irons, you are probably not getting set up right (i.e. ball too far forward) - resulting in lots of chunked or sculled shots.

Driver: Cobra 460SZ 9.0, med.
3 Wood: Taylor stiff
3-hybrid: Nike 18 deg stiff
4-hybrid:
Taylor RBZ 22 deg regular
Irons:5-9, Mizuno MP30, steel
Wedges: PW, 52, 56, 60 Mizuno MP30
Putter: Odyssey 2-ball


Thank you very much for your replies. I know I tend to over analyze. This said, I do have a follow up question. Hope this isn't a stupid one. I put the ball up in my stance for my 3 and 4 iron as well as for my fairway wood. As I understand I should be hitting slightly down on the ball with the 3/4 iron but not with the wood. Is that right?

I ask because this year I'm hitting my 3/4 iron well (for me) but can't seem to hit my 5 wood consistently. Please note, Chas is right, I don't tend to take much of a divot on most shots. Although my short irons tend to be my most consistent clubs.

In the bag
Driver: HiBore (10.5, graphite - regular)
Irons: MX-23 (steel - regular)
Wedges: Vokey (56, 60 degrees)
Putter: White Hot 2-Ball Blade


Just to further complicate things, these days there's no compelling reason for anyone to even be hitting a 3 or 4 iron - if you haven't already tried one, hit a couple of the newer so-called "hybrid" irons and see what you think. They're much easier to hit than a traditional long iron, and you can even effectively replace your 5-wood with a 2-hybrid in around an 18 or 19* loft.

I don't play a fairway wood at all...I carry a 16* hybrid I can hit around 230 off the turf, and if I'm farther out than that I lay up. I think that's the best solution for us middle-to-high handicappers.

"My swing is so bad I look like a caveman killing his lunch." ~Lee Trevino

Currently playing Maltby C.E.R. 701u

Build your own...Total cost of my complete set of golf clubs: 500 bucks.Beating a guy who sports a $2000 bag of : priceless.


Old Tom,
I agree with your post, since I've been using a couple of hybrid clubs for a while now and never used a long iron (3 or 4). But, just a few weeks ago, I finally worked on my 3i and 4i at the range and find I can hit them pretty good now (at the range at least ....), I'm no longer intimidated by these clubs. I'm more accurate with them than with a hybrid (directionally), but still am more likely to chunk or thin the ball and so don't get such consistent distance. I do advise people to work on their longer irons, because if you're confident with those, the shorter irons (5i on down) feel easier as a result.
I'm no low-handicapper, but I think you've got it about right TerenceFinn (but some scratch player please correct me if I'm wrong). The ideal contact with any wood or hybrid is essentially at the very bottom of the arc, hence the forward ball position. With a long iron, you should hit just slightly before bottom, to better ensure a solid hit. Of course hitting it at bottom wouldn't be a problem, but it's a bit harder to avoid the chuck/thin that way IMO.
Problem I've got now: to keep within 14 clubs, do I take the 3i, 4i, 18deg hybrid or 21 deg hybrid ? (I always take 3 and 5 woods as well as the driver, I like hitting fairway woods when I need the distance on par5s etc). Gotta choose. I haven't settled on anything yet, which is OK: variety is the spice of life !

Driver: Cobra 460SZ 9.0, med.
3 Wood: Taylor stiff
3-hybrid: Nike 18 deg stiff
4-hybrid:
Taylor RBZ 22 deg regular
Irons:5-9, Mizuno MP30, steel
Wedges: PW, 52, 56, 60 Mizuno MP30
Putter: Odyssey 2-ball


Be carefull of the phrase hit down, I see many newer golfers moving their body or shoulders downward in an attempt to hit down. Try to build an awareness of what the clubhead is doing. The club head should be moving down and through. If you try to force it your body posture may be compromised and it may be difficult to release the club.

1W Cleveland LauncherComp 10.5, 3W Touredge Exotics 15 deg.,FY Wilson 19.5 degree
4 and 5H, 6I-GW Callaway Razr, SW, LW Cleveland Cg-14, Putter Taylor Made Suzuka, Ball, Srixon XV Yellow


  • Administrator
Be carefull of the phrase hit down, I see many newer golfers moving their body or shoulders downward in an attempt to hit down. Try to build an awareness of what the clubhead is doing. The club head should be moving down and through. If you try to force it your body posture may be compromised and it may be difficult to release the club.

That's a good point. You hit down through the ball naturally if the ball is at the bottom or just behind the lowest point in the club's arc.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Note: This thread is 6803 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 335 - More putting work, with the focus on setup and hitting the sweet spot. 
    • Day 153: putted for a while using the 2 cups drill inside. Working on bead primarily. Contact was really good. 
    • Day 8: 12/17/2024 Okay I took my new PPJ swing thought to the range today. I wasn't sure I was quite ready to do so, but I'm glad I did.  When I got it right it was good... really good. When I got it wrong it was a major fail. I hit lots of really ugly ones. But I didn't let that deter me. I stayed committed and focused on the PPJ and I avoided any temptation to go back to what I was doing before just so that I could "look" better at the range. I'm pretty excited about what I saw when I got it right.  I hit the 6 iron mostly (nearly all block work today). I also hit about 6 balls each with the PW, 8I, 5W and Driver. Those had varying degrees of success. I did crack one drive that let me feel and see what the changes will look like once I get fully trained.  Anyway, I'm going to go back to the mirror work for a couple of more days before bringing it back to the range. I do feel like if I can get this right my swing will improve a lot. So I think its worth the effort. I liked the way it looked on GEARs when I get it right, and I like the results I got at the range when I got it right. Now the goal is to work towards getting it right more often. 
    • So I think it's that they can't just bend the shaft or hosel to get it to a new lie angle. They adjust that and it changes the weighting, so they have to then adjust all the weights to get it balanced again. I get the impression that it's a bit of an iterative process and they do it all in the US, so they're paying US labor costs to build it and make it work how it's supposed to. Whether you believe in the tech or not, I think that's a true statement.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...