Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6096 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hey everyone,

Recently, my putting had been off and I was just going through the usual methods of research and I decided maybe, I should try using the line on the ball again. It never really worked for me the first time around and I thought it was silly because my perception would be a bit off. Now, I tried it again and getting my read done first actually contributed to me making many many more putts. I found that I needed to have a read and a line that I can't compromise mid putt and just trusting where that ball is pointed helped me a lot.

How many of you use the line on the ball to align your putts before you set up to it?
Awards, Achievements, and Accolades

Posted
I've always found the line to be distracting to me. When I line the ball up I put the company side stamps on the sides and the model stamp pointing at the hole/line-of-putt, but everything is turned so I can not see them when I address the ball. The problem I have with using a line or one of the stamps to line up ball is that my eyes tend to focus on that instead of thinking about line of the putt and the speed (I used to have the same problem in fairways where if I saw anything on the ball my eyes locked on it and I ended up hitting almost everything thin).
Driver: SQ DYMO STR8-Fit
4 Wood: SQ DYMO
2H (17*), 4H (23*) & 5H (26*): Fli-Hi CLK
Irons (5-6): MX-900; (7-PW): MP-60
Wedges (51/6*): MP-T Chrome; (56/13): MP-R ChromePutter: White Hot XG 2-Ball CSPreferred Ball: e5+/e7+/B330-RXGPS Unit: NEOPush Cart: 2.0

Posted
Long before everyone got into the line on the ball, I used to simply aim the words/logo. It's not necessarily mega-accurate but it helps. So does the line on the ball.


 


Posted
My golf coach made us use it and i didn't feel it helped. I normally dont use it unless my putting is really really falling apart.

In my Extreme Sport Stand Bag
Driver: 4DX D-Spec Driver 10.5* Stiff UST SR3
3W: F-60 15* Regular Fujikura E150 Fit-On
Hybrids: 4DX Ironwoods 20* 23* Regular UST SR3
Irons: 4DX CB 5-PW Stiff True Temper ST-90Wedges: Vokey 50* 56*Putter: SabertoothBall: DT Roll


Posted
I never use the lines on the ball, I can never line them up right and think too much about it.

I pick something in the green about 6 inches to a foot in front of the ball, stand behing the ball and line up the putter perpendicular to the ball then swing around to the ball and line up with the putter in the normal putting stance.

In the Bag...Ping Hoofer

3dx Tour Square - UST V2 HMOI X Flex
3dx 15* - X flex
Baffler DWS 20* Aldila NV Stiff 4-GW 600XC Forged Irons- S Flex 55* SW - Burner XD 60* LW - Burner XD Craz E Putter <----ProV1x---> Pellet


Posted
I've never bothered with it. If I'm playing as a single, you'll never see me pick the ball up until it's holed out.

in the bag...

Driver: MX560
3W/5W: Tight Lies
3i-pw: Pi-7gw/sw: Tom Watsonputter: Bulls Eye bag: Ozoneball: / home: Lake of the Woods @ www.golfthelake.com


Posted
I always line it up and I have found that it has helped me tremendously. It helps with my 2 ball becasue that doesn't a line on it.
Awards, Achievements, and Accolades

Posted
...How many of you use the line on the ball to align your putts before you set up to it?

:Raises Hand:

I use it on every putt - line up the putt the way you want it then forget about the breaks in the putt (after all its the speed that dictates the line anyway). Helps me focus more on making a solid strike.

:P
In the bag Nike SasQuatch SuMo 10.5* {} Tiger Shark Hammerhead 3w, 5w, 3h {} Nickent 3DX Pro 5i-PW {} Titleist Vokey 250.08* {} Cleveland CG11. 54* {} Callaway X-Tour 58.11* {} Carbite Tour Classic Putter {} Titleist ProV1x


Posted
I'm kinda a feel player/putter. I have tried the line on the ball. But often times I would get over the ball and just "feel" it needed to be a little more right or left. Rather than re-spot the ball and go through my whole preshot routine, I just vaguely point the factory stamped line in the general direction, then ignore it and focus on my intermediate target and pace.

Posted
:Raises Hand:

+1: it removes a variable from the equation leaving you free to focus on the speed of the putt. Helps me a lot...

In the bag:
905R 9.5° - UST ProForce V2 65R
909F2 15.5° Titleist Diamana 75
909H 19° Titleist Diamana 80
Zing 2 3-PW Vokey SM48.08 @ 51° Vokey SM56.11 Unitized Leo

Posted
I always use the line,i know exactly where i am aiming once i square up to it.

aeroburner tp 10.5 stiff
superfast tp 2.0 3 wood stiff
Halo 25 and taylormade tp 19 degree hybrids
miura cb 202 and wedge
tp 52* wedge, tp 56* taylormade spider mallet putter


Note: This thread is 6096 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 34 (14 Dec 25) - Got outside for a few moments to work on bump and runs with the 4h (again using the exaggerated weight shift reminder of the left (lead) heel). Finding that it helps keep the downswing arc extended.  
    • Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • You can try it with some lead tape first to see if it works for you.
    • Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.