Jump to content
Note: This thread is 5728 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Okay, so now that I'm getting some butter Mizuno irons, they will be my babies. I only have 3 of them built thus far and they are starting to get a little bit of bag chatter, which I know "builds character," but I'm curious if anyone has any real experience with this.

Mizuno's bag's have that "Kabuki" divider system that is supposed to reduce bag chatter and keep the clubs from clanking against each other as much, and I'm curious if it will actually do what it claims. If any company were to come up with a bag design that would minimize damage to soft forged irons, I'd expect Mizuno to be the one.

I have a Ping Hoofer 2 that is still going strong, but the clubs definitely clank quite a big especially when walking.


Does this actually work? And if so, is it worth $100+ for a new bag now that I've got much softer irons?
Penta TP Ball || Nakashima Golf HTEC Tour Driver - w/ Mitsubishi Rayon Bassara 83g || Izett Golf 15* Deep Face 3-Wood - w/ Royal Precision Rifle Steel || MD 18* Hybrid - w/ Aerotech SteelFiber 110g || MP-58 3, 4 Irons... MP-60 5, 6 Irons... MP-32 7-PW - w/ Dynamic Gold || MP-T 53-08...

Bag Boy has the cliplock system that clips each club in it own slot. This is supposed to reduce club chatter a bunch.

In my bag are
Hibore XLS 10.5*
Hibore XLS 22* 3i Hybrid
TA7 irons 3-PW, SW
CG11 60* LW VP #5 putter.


ya i have the mizuno stand bag with that thing and It works at little but nothing special

15 yrs old



DriverBurner 10.5 degree stiff flexFairway Burner 15 degree proforce 75 gram regular flex Hybridrescue dual 19 degree stiff flexHybrid edge cft hybrid 24 degree stiff flex Irons progressive XC 5-PW regular HOPING FOR TOUR PREFERRED's!SW rac satin tp wedge 56 degreesLW spin milled...


chatter is fine, don't listen to the companies that make this stuff, it's unnecessary accessorizing (say that 5 times fast!)

I play forged irons and use the hoofer two and it's no problem. No amount of chatter will change the performance of your clubs. Nicks and scratches only means you use them. Go to any college tournament or major amateur event and you'll hear it everywhere.

Driver - TaylorMade R7 425
3-Wood - Callaway Original Steelhead
Irons - Ben Hogan 3-PW Apex FTX, Rifle 6.5
Wedges - Titleist Vokey 52, 56, and 60
Putter - Scotty 2004 Newport Beach 1.5


chatter is fine, don't listen to the companies that make this stuff, it's unnecessary accessorizing (say that 5 times fast!)

Couldn't agree more


ya i have the mizuno stand bag with that thing and It works at little but nothing special

I have the Twister III bag and I don't notice much chatter at all. But you're gonna get some its a great sound of golf. Nothin better than forged iron heads clackin' together.

:taylormade: R9 9.5d with Fujikura Motore 65 Stiff
ss-07 13deg 3 wood Graphite Design Purple Ice 85-S
Md-17 1i/4w UST V2 Tour Hybrid X
A3 Pro 20 Tour Prototype Mitsubishi Javln X
MP 57 4,5,6 Project X 6.5 MP 67 7,8,9 Project X 6.5 Vokey 200 series 48d Project X satin 6.5/ Vokey 09SMTC 54.11...


I completely agree with the above, clubs clinking together is one of the classic sounds of golf, it's usually when you know a true player is near.

Nothing screams douche like having 14 clubhead covers or something of the like.

Driver - TaylorMade R7 425
3-Wood - Callaway Original Steelhead
Irons - Ben Hogan 3-PW Apex FTX, Rifle 6.5
Wedges - Titleist Vokey 52, 56, and 60
Putter - Scotty 2004 Newport Beach 1.5


I completely agree with the above, clubs clinking together is one of the classic sounds of golf, it's usually when you know a true player is near.

Wrap your towel around your clubs when you walk. To me nothing screams douche like the guy that purposefully walks extra bouncy to make the clatter super audible.

A true player isn't defined by the sound he makes, just the scores he posts. Although I do agree - iron covers are for people that piss sitting down.

driver: FT-i tlcg 9.5˚ (Matrix Ozik XCONN Stiff)
4 wood: G10 (ProLaunch Red FW stiff)
3 -PW: :Titleist: 695 mb (Rifle flighted 6.0)
wedges:, 52˚, 56˚, 60˚
putter: Studio Select Newport 1.5


let the irons clang all they want, i dont mind it, its actually kind of soothing, kinda walking to the beat of a drum.. Ha

but I do have covers for my vokey wedges.. I like to keep my wedges clean and dingless.

But........but......... why would you want to reduce the SOUND OF FEEL?!?!?!?!?

Driver: Tour Burner 9.5° Stock Stiff
Wood: Tour Burner TS 13° Stock Stiff
Hybrid: Tour Burner T2 18° Stock Stiff
Irons: Tour Preferred 3-PW Rifle Project X 6.0
Wedges: 54.10|58.08 Z TP Rifle Spinner 5.5 Putter: VP Mills VP2 Ball: TP/Red.LDP Bag: Warbird Hot Stand Bag 2.0Started playing...


But........but......... why would you want to reduce the SOUND OF FEEL?!?!?!?!?

Touché...
Penta TP Ball || Nakashima Golf HTEC Tour Driver - w/ Mitsubishi Rayon Bassara 83g || Izett Golf 15* Deep Face 3-Wood - w/ Royal Precision Rifle Steel || MD 18* Hybrid - w/ Aerotech SteelFiber 110g || MP-58 3, 4 Irons... MP-60 5, 6 Irons... MP-32 7-PW - w/ Dynamic Gold || MP-T 53-08...

To me nothing screams douche like the guy that purposefully walks extra bouncy to make the clatter super audible.

Maybe I just don't watch others enough, but I've never seen anybody walk extra bouncy to make their clubs make noise, that is just absurd.

Driver - TaylorMade R7 425
3-Wood - Callaway Original Steelhead
Irons - Ben Hogan 3-PW Apex FTX, Rifle 6.5
Wedges - Titleist Vokey 52, 56, and 60
Putter - Scotty 2004 Newport Beach 1.5


I completely agree with the above, clubs clinking together is one of the classic sounds of golf, it's usually when you know a true player is near.

Ouch..

I don't mind the Irons clanking, but my irons have nicked the shafts of my Woods and I don't want that on my graphite shafts! So I either throw an extra towel between them, or use head covers on those close to my Woods, but that's a PITA... I hate messing with covers and the towel...

I have the Mizuno Tour Stand Bag... I understand why you don't want clatter sound- for me, I have playing partners that I don't want to disturb by walking while they swing. I know this is odd, but some of the people I play with are somewhat slow and I wanted a bag with less clatter sound so I can speed up play without disturbing anyone in my group or disturbing other groups while they are hitting. IMO, the Kabuki works well to mitigate the sounds of clubs hitting each other. However, I miss a separate putter well and the legs/stand component isn't really sturdy- if u have a putter, you must have a cover especially if you have a mallet or else it will scratch your iron shafts. I thought this would be a top notch bag at $200 but, it has many top notch features, but a few odd design flaws IMO. The Callaway Warbird bag has a sturdy stand feature although I'm not impressed with the aesthetics of the bag- too much logo-ing and colors, but I expected it to be sturdy like the Callaway bag. In the future, I hope Mizuno creates a better, more solid leg/stand feature and perhaps reshape the Kabuki to include a putter well. If so, the bag will be perfect.
Note: This thread is 5728 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 9: 12/18/2024 Okay so about 15 minutes of focused mirror work today and I still have the station set up outside my office door so every time I enter or leave I get 1 to 5 extra slow-mo swings in.  The PPJ swing thought is getting better. In terms of PP I need to make sure I keep the attention on using the ground up through the movement and not just "going through the motions".  The J part, I have to focus on my lead sit-bone driving directly away from the ball. I still like to go up and out on that when I lose focus.  Repetitive slow-mo and medium-mo swings are helping. 
    • What technology? There’s not much. Or a spreadsheet. 🤣😜
    • I was thinking about what you suggested on this. And it's very possible its true.  I was also thinking, why wouldn't they have a piece of software that tells them something like: "If you drill the shaft hole at x angle and the shaft is y long, but the weights in A, B and C locations at D, E and F amounts? I mean we aren't modelling anything here that isn't a known relationship?  I've been in the manufacturing world a long time (33 years.) I've worked for and seen tons of manufacturers in the US who can handle one-piece flow with no hiccups what so ever.  I would love to take a plant tour and offer my services to these guys. On a whim, I looked on their webpage and they do have two positions available. A fulfillment associate and a fitting representative. Both at positions are at their plant in OR. Neither of these was a lean manufacturing engineer so I moved on.  I apologize for beating this dead horse.  I'm not sure why the cost adder for custom built from standard parts bothers me so much. It could be because I've worked so many places that just have you build up a nomenclature which relates to a build sheet and end of line test. Which equals no cost adder for standard parts. Maybe it's because I once toured the Roles Royce plant in England and thought "I'd never feakin buy one of these cars." Maybe I've been spoiled by PXG and Mizuno, the last two places I've order custom fit irons from. They customized each club including lie angle tweaks, loft tweaks, length tweaks, weight port tweaks, etc... No cost adder. 
    • Ugh, I think I'm a little out of practice. Wordle 1,278 5/6* ⬛🟨🟨⬛🟨 🟨🟨🟨⬛🟩 ⬛🟩🟨🟨🟩 🟩🟩⬛🟩🟩 🟩🟩🟩🟩🟩
    • Wordle 1,278 4/6 ⬜⬜⬜⬜🟨 ⬜⬜⬜⬜🟨 ⬜🟩⬜🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...