Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5784 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hey Guys, my girlfriend is starting to take an interest in golf. She is playing with an older set of clubs that were her dad's but wants to get her own. I really don't have much of an idea where to start. She's pretty tall (5'10"ish) and reasonably athletic. However, she has complained that her old clubs feel a bit heavy. I'll try and get the specifics of what she's currently using if it helps. I don't want to spend too much and willing to buy used. So, any suggestions or personal experiences from similar situations?

Driver: 909D3 9.5*
Wood: 909F3 15*
Hybrid: a4 3-4H
Irons: MP-57 5-PW
Wedges: MP R 50.5 SM 54.12 MP R 58.10Putter: Pro Platinum Newport 2 Mid SlantCorrect me if I'm wrong Sandy, but if I kill all the golfers, they're gonna lock me up and throw away the key...


Posted
I just helped a woman I work with find a set of Ping G2 used...she is 5'10 as well. I posted a couple of weeks ago and got the advice that you should for sure get her men's clubs...my pro also said any woman over 5'7 usually fits into mens.

She spent $200 on a great set and she said that she has never hit the ball that far and is loving golf again.

My Bag

Grom
r7 Limited 10.5
Hybrid 3 Baffler BB 2004 Irons 4-PW, GW, SW Vokey 60 wedge White HotProV1x


Posted
just like runners, i always see that newbies "hitting a brick wall" and they either push ahead and become long time golfers or they quit before they have really started.

you should get her a set that's as easy to hit as possible so she doesn't get turned off the game after a few bad rounds. possibly an all hybrid set for starters. as she improves, you could get her a half set (6-GW) of irons, etc.

adams or nickent come to mind...

Driver: TaylorMade RocketBallz 10.5-deg
Woods: Cobra Bio Cell+ 3W and 5W
Hybrids: Bobby Jones Workshop Hybrid 3 (20-deg) and 5 (25-deg)
Irons: Srixon XXIO7 from 6 - PW
Wedge: Srixon XXIO7 GW and SW

Putter: Bobby Grace DCT Captiva 34"; Ball: Sirxon Soft Feel; Shoes: Footjoy


Posted
I was going to say adams or nickent. But then he said it. And now I guess I said it.

907D2 driver and 906D4 3 wood
Idea Pro Gold 3 4 5 hybrids
Apex Plus 6 7 8 9 E irons
900 52 gap 56 sand 60 lob wedges
Rossa Suzuka Putter


Posted
So, Adams and Nickent sound like the way to go. Any specific models that are good to look into, or just stick with basically anything from these brands?

Driver: 909D3 9.5*
Wood: 909F3 15*
Hybrid: a4 3-4H
Irons: MP-57 5-PW
Wedges: MP R 50.5 SM 54.12 MP R 58.10Putter: Pro Platinum Newport 2 Mid SlantCorrect me if I'm wrong Sandy, but if I kill all the golfers, they're gonna lock me up and throw away the key...


Posted
I think Ping's are the most forgiving clubs, but quite expensive. Especially if you don't know if she'll keep playing. My sister really like her RAM golf set by the way, it may be cheaper as it's not such a big brand.

Posted
GF's mom uses adams clubs, and loves them. They are a mixed/hybrid set. very nice clubs. I think they are A3 OS clubs
Bag: Flight SS
Driver: 10.5* r5 draw with Pro Launch blue 65 Stiff
Irons: CCi Forged 3i-pw
Wedges: 56* CG12 black pearl and 60* low bounce RTG 900
Putter: i-Series Anser 35"Ball: e5+Tee: Zero FrictionGlove: FootJoy WeatherSofRangefinder: MedalistShoes: Sp-6 II, Adidas 360Scores this year:92 91...

Posted

HiBore XLS Tour 9.5*
Adams Fast10 15* 3W
A2OS 3H-7iron 60* LW
8iron Precept Tour Premium cb
9iron and 45* PW 50* GW 56* SW m565 and 455 VfoilPutter Anser Belly Putter Ball in order of preference TPblack e5 V2  AD333


  • 1 year later...
Posted
Wanted to resurrect this thread because my gf is looking to take up golf and will be taking lessons beginning this week. Assuming she decides to stick with it, any new recommendations on a beginner set of clubs for her (latest recommendations on this thread are over a year old and wanted to see if anything new/worthy has popped up since then). thanks in advance.

Another question, I've looked at the women's adam's sets but it seems they are primarily hybrid irons. I know that hybrids will be easier to hit with for a beginner, causing less frustration, and increasing chances of enjoying golf, however I'm wondering because of the ease in hitting hybrids, if this will "hold" her back from really learning how to hit. Call me old fashioned, but I would think in the long run it would be better for her to learn to hit irons vs hybrids. Of course, having her learn on irons might cause such a high level of frustration that she doesn't want to pursue it.....................

Any personal experiences from anyone in getting their gf/wife onto the game, keeping her from getting overly frustrated, and keeping her interest in it high?

 

In my Mizuno Aerolite IV Stand Bag:

Driver: Titleist 910D2 (9.5°, RIP Alpha 70S)
Wood: Titleist 910F (15°, RIP Alpha 70S)

Irons: Mizuno MP-68 Irons (3 - PW, C-Taper S+), Mizuno MP-33 2 Iron (C-Taper S+)

Wedges: Vokey Spin Milled (56.11 - Bent to 54°, 60.07 Tour Chrome, C-Taper S+ DSS)

Putter: Scotty Cameron Newport 2 (34")

Ball: Titleist Pro-V1x

GPS: Garmin Approach g5

Most useful training aids (for me) that I use: Tour Striker Pro 7 Iron, Swingyde, Tour Sticks alignment sticks, Dave Pelz Putting Tutor


Posted
Costco was recently selling a 8 piece set of Nike Slingshot 4D's for $300. Might wanna check out their website.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco


Posted
Mizuno Sora or Adams would be my suggestion.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Note: This thread is 5784 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.