Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5939 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I am in the market for new irons, since I absolutely hate my X-22's, I've been told the reason I'm having problems is probably a combination of the uniflex shafts, and the fact that I learned to play with irons with a lot less offset, and can't adjust to the offset in the X-22's.

I went and demo'd a buttload of new irons today, and here's what I found out for me:

Cleveland CG7's, regular flex steel shafts: Hit a 7 iron, average distance 138 yards, slices were common.

TaylorMade Burners, regular flex steel shafts: Hit the 7 iron average 146 yards, ball flight was very high.

TaylorMade Burner XD, regular flex graphite shaft: Hit the 6 iron, average 138 yards, shaft was 3/4" longer than the CG7's and Burner. Did not like the way the club felt at all on impact.

Mizuno MX200, regular flex graphite shaft: Hit the 7 iron, average 148 yards, solid feeling club, mid ball flight.

Nike CCI, non forged, regular flex, graphite shaft: Hit the 7 iron, average 147 yards, decent feeling club.

My favorite that I demo'd today:

The TaylorMade Burner Tour Model, steel shaft, regular flex. Only got to hit the 6 iron, average 178 yards. Long, straight ball flight, perfect trajectory.

I think I've found my new clubs. I thought Tour models were geared towards lower handicaps than mine, but there was just something about that club that I really liked. It felt good in my hands, good on impact, and gave me the feeling that every shot was going to be perfect.

Posted
Most likely, the reason you are having problems is due to:
1. Your swing/posture/set up (your own fault, not the club)
2. You probably need different shafts fitted for you

But, mostly because you need lessons. Good players can hit any type of iron/offset given the right shaft. Get fitted for the right shafts and use the rest of the money for lessons.

In my Grom:
R9 460 Aldila RE-AX 60g Stiff
07' Burner 3 Wood Stiff
09' Rescue 2 and 4 Stiff
09' Burner 3-PW Superfast 85 Stiff 09' Vokey Spin Milled Black Nickel and Oil Can Wedges 50,54,60SeeMore Putter Pro V1 2.0 SG 2.5


Posted
To the above....I believe you have hit the nail on the head.

Posted
I agree with the above. Also, I don't trust the launch monitors. I would find a place that has a real range and watch the ball flight with your own eyes. Also, get fitted (a real fitting with a true professional at a place like I mentioned above).

Brian


Posted
Most likely, the reason you are having problems is due to:

agreed ...... but at the same time i didnt do too well with callaway irons either. as soon as i switched ....bang. reg flex might not be stiff enough either. secondly GET FITTED!!! it makes a world of difference.

Forget your opponents; always play against par. ~Sam Snead

Sumo2 5900 9.5, ProForce V2 stiff
Diablo 3w
Baffler TWS 3h MP57 4-pw VR wedge 52.10, 56.14 TPz 60.06 Studio Style Newport 2 SG5ProV1x


Note: This thread is 5939 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I have a couple of trips planned, although golf was a secondary component in each.  In February we're going to visit some friends near Naples, so Mary Anne and I have added on a few days to stay and play at Streamsong.  Then In March we're going to Hawaii (again), and will almost certainly get in a few rounds there.
    • My next golf trip will probably be a short one, but I’m really looking forward to it. I’m thinking of staying relatively close, picking a spot with a few solid courses and making a long weekend out of it. For me, the best golf trips are about good courses, relaxed vibes, and time away with friends.
    • Nah, man. People have been testing clubs like this for decades at this point. Even 35 years. @M2R, are you AskGolfNut? If you're not, you seem to have fully bought into the cult or something. So many links to so many videos… Here's an issue, too: - A drop of 0.06 is a drop with a 90 MPH 7I having a ball speed of 117 and dropping it to 111.6, which is going to be nearly 15 yards, which is far more than what a "3% distance loss" indicates (and is even more than a 4.6% distance loss). - You're okay using a percentage with small numbers and saying "they're close" and "1.3 to 1.24 is only 4.6%," but then you excuse the massive 53% difference that going from 3% to 4.6% represents. That's a hell of an error! - That guy in the Elite video is swinging his 7I at 70 MPH. C'mon. My 5' tall daughter swings hers faster than that.
    • Yea but that is sort of my quandary, I sometimes see posts where people causally say this club is more forgiving, a little more forgiving, less forgiving, ad nauseum. But what the heck are they really quantifying? The proclamation of something as fact is not authoritative, even less so as I don't know what the basis for that statement is. For my entire golfing experience, I thought of forgiveness as how much distance front to back is lost hitting the face in non-optimal locations. Anything right or left is on me and delivery issues. But I also have to clarify that my experience is only with irons, I never got to the point of having any confidence or consistency with anything longer. I feel that is rather the point, as much as possible, to quantify the losses by trying to eliminate all the variables except the one you want to investigate. Or, I feel like we agree. Compared to the variables introduced by a golfer's delivery and the variables introduced by lie conditions, the losses from missing the optimal strike location might be so small as to almost be noise over a larger area than a pea.  In which case it seems that your objection is that the 0-3% area is being depicted as too large. Which I will address below. For statements that is absurd and true 100% sweet spot is tiny for all clubs. You will need to provide some objective data to back that up and also define what true 100% sweet spot is. If you mean the area where there are 0 losses, then yes. While true, I do not feel like a not practical or useful definition for what I would like to know. For strikes on irons away from the optimal location "in measurable and quantifiable results how many yards, or feet, does that translate into?"   In my opinion it ok to be dubious but I feel like we need people attempting this sort of data driven investigation. Even if they are wrong in some things at least they are moving the discussion forward. And he has been changing the maps and the way data is interpreted along the way. So, he admits to some of the ideas he started with as being wrong. It is not like we all have not been in that situation 😄 And in any case to proceed forward I feel will require supporting or refuting data. To which as I stated above, I do not have any experience in drivers so I cannot comment on that. But I would like to comment on irons as far as these heat maps. In a video by Elite Performance Golf Studios - The TRUTH About Forgiveness! Game Improvement vs Blade vs Players Distance SLOW SWING SPEED! and going back to ~12:50 will show the reference data for the Pro 241. I can use that to check AskGolfNut's heat map for the Pro 241: a 16mm heel, 5mm low produced a loss of efficiency from 1.3 down to 1.24 or ~4.6%. Looking at AskGolfNut's heatmap it predicts a loss of 3%. Is that good or bad? I do not know but given the possible variations I am going to say it is ok. That location is very close to where the head map goes to 4%, these are very small numbers, and rounding could be playing some part. But for sure I am going to say it is not absurd. Looking at one data point is absurd, but I am not going to spend time on more because IME people who are interested will do their own research and those not interested cannot be persuaded by any amount of data. However, the overall conclusion that I got from that video was that between the three clubs there is a difference in distance forgiveness, but it is not very much. Without some robot testing or something similar the human element in the testing makes it difficult to say is it 1 yard, or 2, or 3?  
    • Wordle 1,668 3/6 🟨🟨🟩⬜⬜ ⬜🟨⬜⬜🟨 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.