Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5670 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
If I wanted a 55* wedge would there be any advantage to either:
bending a 54* up
- or -
bending a 56* down?
FWIW I use a standard lie and medium bounce (~7*).

tia

Posted
It would gain a degree of bounce if you bent the 54, or lose a degree of bounce if you bent the 56.

Posted
What clubs are in your bag (wedges) and what are your yardages. That should be the determining factor.

In the Bag: TaylorMade R11 TP - TaylorMade R7 TP TS - Cleveland Halo - TM TP 2009 3-PW - Vokey SM 52 - Vokey SM 60 - Rife Barbados CS - ProV1x 


On the Computer:  Analyzr Pro 
 


Posted
Say you have a Pitching wedge with a loft of 45 and a 60 lob wedge. You might want to bend it to a 54 if you don't play on buying a gap wedge, or a 56 if you plan on buying a gap wedge.
What's in my Bag:
Driver-TaylorMade 09 burner 10.5* | 3 wood-TaylorMade 09 burner | 3 hybrid-TaylorMade Rescue 09 | 4-GW-Titliest AP1 710s | 54.08 wedge-Titliest Vokey spin milled | 60.04 wedge-Titliest Vokey spin milled | Putter-Odyssey white hot #7 | Ball - whatever i find

Posted
i'm about to do the same thing, i know changing the loft changes the bounce but what i'd like to know is how the centre of gravity and offset is affected. a 56 is going to have slightly less offset than a 54. things being equal (the bounce being the same) is it better to reduce the loft of a 56 or increase a 54?

Posted
From my knowledge, if you bent a 54* to 55*, it would cause the leading edge to be farther out, and vice versa when bending a 56 to 55. I would probably go with the 56 to 55, mainly because it would decrease the amount of bounce and cause the leading edge to be less protruding. But then again, that's me, do what you feel is right.

In the bag:
Driver: 907 D2/Proforce V2 R-flex
Hybrid: Burner '07 3 Hybrid/Re-Ax Shaft/19* (4* draw bias)
Irons: AP1 4-7i
AP2 8-PWedges: Spin Milled Tour Chrome (52.06/56.11) VR Forged Chrome 60.06Putter: Ignite 001 Ball: Pro V1/ One Tour/


Posted
For all the worry about bending a 54* up or a 56* down, I don't seriously think 1 degree is going to make enough difference to bend either.

:tmade: 09 Burner
:cobra: Speed LD F 3 wood
:cobra: Baffler 20 degree hybrid
:cobra: Baffler TWS 23 hy
:ping: G15 5-UW
:snake_eyes: 56 deg SW 
:snake_eyes: 60 - 12 wedge  
:scotty_cameron: Studio Select Newport 2


Posted
For all the worry about bending a 54* up or a 56* down, I don't seriously think 1 degree is going to make enough difference to bend either.

+1.

The tour pro's will find a difference. The average player won't. not worth fiddling around with your club.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
For all the worry about bending a 54* up or a 56* down, I don't seriously think 1 degree is going to make enough difference to bend either.

I think even a mid-level player would notice the playability of a 54/6 versus a 56/8 (both coming from a 55/7 bent either way). The 54 would play much cleaner from a tight lie, and they'd likely notice better sand and rough performance from the 56. In addition, there *should* be a yardage difference of at least 5 yards, which could matter to some depending upon the gaps in their bag

In the Bag: TaylorMade R11 TP - TaylorMade R7 TP TS - Cleveland Halo - TM TP 2009 3-PW - Vokey SM 52 - Vokey SM 60 - Rife Barbados CS - ProV1x 


On the Computer:  Analyzr Pro 
 


Posted
FWIW I use a standard lie and medium bounce (~7*).

7 degrees of bounce on what wedge? I would advise you use more bounce with the 55 as it will see a lot of use from normal greenside bunkers and more bounce will help.


Posted
It would gain a degree of bounce if you bent the 54, or lose a degree of bounce if you bent the 56.

That makes sense. Thanks, just what I was looking for.


Posted
For all the worry about bending a 54* up or a 56* down, I don't seriously think 1 degree is going to make enough difference to bend either.

Perhaps - - but I was also interested in this question for theoretical/understanding issues as well.


Posted
7 degrees of bounce on what wedge? I would advise you use more bounce with the 55 as it will see a lot of use from normal greenside bunkers and more bounce will help.

7* on my current 52* wedge

But I'm considering buying new irons and with the loft of that "P" club (the possible new one) and my current wedges I need to make sure I've got the right mix of wedges going forward. Just trying to better understand my options.

Note: This thread is 5670 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • In terms of ball striking, not really. Ball striking being how good you are at hitting the center of the clubface with the swing path you want and the loft you want to present at impact.  In terms of getting better launch conditions for the current swing you have, it is debatable.  It depends on how you swing and what your current launch conditions are at. These are fine tuning mechanisms not significant changes. They might not even be the correct fine tuning you need. I would go spend the $100 to $150 dollars in getting a club fitting over potentially wasting money on changes that ChatGPT gave you.  New grips are important. Yes, it can affect swing weight, but it is personal preference. Swing weight is just one component.  Overall weight effects the feel. The type of golf shaft effects the feel of the club in the swing. Swing weight effects the feel. You can add so much extra weight to get the swing weight correct and it will feel completely different because the total weight went up. Imagine swinging a 5lb stick versus a 15lb stick. They could be balanced the same (swing weight), but one will take substantially more effort to move.  I would almost say swing weight is an old school way of fitting clubs. Now, with launch monitors, you could just fit the golfer. You could have two golfers with the same swing speed that want completely different swing weight. It is just personal preference. You can only tell that by swinging a golf club.     
    • Thanks for the comments. I fully understand that these changes won't make any big difference compared to getting a flawless swing but looking to give myself the best chance of success at where I am and hopefully lessons will improve the swing along the way. Can these changes make minor improvements to ball striking and misses then that's fine. From what I understood about changing the grips, which is to avoid them slipping in warm and humid conditions, is that it will affect the swing weight since midsize are heavier than regular and so therefore adding weight to the club head would be required to avoid a change of feel in the club compared to before? 
    • I think part of it is there hasn't been enough conclusive studies specific to golf regarding block studies. Maybe the full swing, you can't study it because it is too complicated and to some degree it will fall into variable or random.  
    • Going one step stiffer in the golf shaft, of the same make and model will have minor impact on the launch conditions. It can matter, it is a way to dial in some launch conditions if you are a few hundred RPM off or the angle isn't there. Same with moving weights around. A clubhead weights 200-220 grams. You are shifting a fraction of that to move the CG slightly. It can matter, again its more about fine tuning. As for grip size, this is more personal preference. Grip size doesn't have any impact on the swing out of personal preference.  You are going to spend hundreds of dollars for fine tuning. Which if you want, go for it. I am not sure what your level of play is, or what your goals in golf are.  In the end, the golf swing matters more than the equipment. If you want to go to that level of detail, go find a good golf club fitter. ChatGPT is going to surface scan reddit, golfwrx, and other popular websites for the answers. Basically, it is all opinionated gibberish at this point.   
    • Wordle 1,640 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.