Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 7200 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I was wondering if I can get professionaly fitted for irons/woods, but just have the irons/woods that I already own adjusted if need be. Is this possible? I have never been fit for clubs before and I know the benefits to being fit for clubs, but i dont have enough money to completely buy new clubs.
REZGOLF

Currently in the bag-

R7 460 9.5 stiffV-steel 3 wood stiff/V-steel 5 wood stiff/2 iron hybrid reg.R.A.C OS2 irons reg.52, 56, & 60 deg. regularScotty Cameron Studio Design Newport II

Posted
This shouldn't be an issue as long as the adjustments that need to be made aren't massive (more than 3 or 4 degrees flat or upright). Being left handed and having Taylormade stop making the LT's about the same time I was buying them basically put me into that position. I had to buy a set of standard lie, stiff shafted, irons knowing that they more than likely would have to be adjusted to 2 degrees upright. There are plenty of places that will adjust the lie of your current irons, depending on how old they are though, I might suggest getting fit and then having them sent back to the manufacturer to be adjusted; Taylormade was awesome about this and didn't even charge me for the adjustment. Having them (the mfg) do this typically will also keep the warranty in place for the clubs if it hasn't already expired.

Either way, if it isn't a big adjustment, it sohuld be a problem at all...
In My Bag:

Taylormade: Superquad 9.5 Aldila VS Proto 'By You' 70-S
Sonartec: SS-07 14.0 Aldila NV 85-S
Cleveland: Halo, 3i UST Irod 83-SPing: i-10 4-UW AWT-STitleist: Vokey Design Spin Milled 54.10 & 60.08Slighter: Handstamped Tacoma, 350G in Black Satin w/Sound Slot

Posted

how long did it take to get the clubs back? I think it would be best to return the clubs to the manufacturer but I also dont want to be without my sticks for too long......

REZGOLF

Currently in the bag-

R7 460 9.5 stiffV-steel 3 wood stiff/V-steel 5 wood stiff/2 iron hybrid reg.R.A.C OS2 irons reg.52, 56, & 60 deg. regularScotty Cameron Studio Design Newport II

Posted
how long did it take to get the clubs back? I think it would be best to return the clubs to the manufacturer but I also dont want to be without my sticks for too long......

I had them in a week, but I also paid for overnight shipping

. You are responsible for the cost of shipping, so you get to have them back as fast or as slow as you're willing to spend. The clubs themselves spend about 4 days there.
In My Bag:

Taylormade: Superquad 9.5 Aldila VS Proto 'By You' 70-S
Sonartec: SS-07 14.0 Aldila NV 85-S
Cleveland: Halo, 3i UST Irod 83-SPing: i-10 4-UW AWT-STitleist: Vokey Design Spin Milled 54.10 & 60.08Slighter: Handstamped Tacoma, 350G in Black Satin w/Sound Slot

Posted
I had them in a week, but I also paid for overnight shipping

how much, on average, does it cost to get fitted for clubs?

REZGOLF

Currently in the bag-

R7 460 9.5 stiffV-steel 3 wood stiff/V-steel 5 wood stiff/2 iron hybrid reg.R.A.C OS2 irons reg.52, 56, & 60 deg. regularScotty Cameron Studio Design Newport II

Posted
how much, on average, does it cost to get fitted for clubs?

I'm guessing you're asking about what it costs to get fit at a shop? I'm really not sure, I've got a pretty good relationship built wit the guys at my local shop. They gave me some demos to take out on the course, then they did the whole dynamic lie fitting with the impact tape, the lie board, and the sticker on the sole of the club. Although they wouldn't have charged me anyway since the clubs were brand new and fitting is part of the purchasing process at this particular store. Launch monitor fitting seems to range anywhere between 29.99 on up depending on the level of detail that goes into the fitting process. My suggestion would be to go back to the place that sold you the clubs and tell them you're not completely satisfied with the job they did in the initial sale and that you'd like to have the clubs more accurately fit to you.

In My Bag:

Taylormade: Superquad 9.5 Aldila VS Proto 'By You' 70-S
Sonartec: SS-07 14.0 Aldila NV 85-S
Cleveland: Halo, 3i UST Irod 83-SPing: i-10 4-UW AWT-STitleist: Vokey Design Spin Milled 54.10 & 60.08Slighter: Handstamped Tacoma, 350G in Black Satin w/Sound Slot

  • Administrator
Posted
I'm guessing you're asking about what it costs to get fit at a shop? I'm really not sure, I've got a pretty good relationship built wit the guys at my local shop. They gave me some demos to take out on the course, then they did the whole dynamic lie fitting with the impact tape, the lie board, and the sticker on the sole of the club. Although they wouldn't have charged me anyway since the clubs were brand new and fitting is part of the purchasing process at this particular store. Launch monitor fitting seems to range anywhere between 29.99 on up depending on the level of detail that goes into the fitting process. My suggestion would be to go back to the place that sold you the clubs and tell them you're not completely satisfied with the job they did in the initial sale and that you'd like to have the clubs more accurately fit to you.

A lot of shops will charge $30 to $50 to $100 for a fitting ($100 is rare - usually around $50), but apply it towards the purchase of a club if you buy one. So if you spend $50 on a launch monitor, it may not be worth it to then go online and buy the same driver for $30 less (or whatever).

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
how much, on average, does it cost to get fitted for clubs?

Make sure you get to a qualified clubfitter whatever happens. I spent $30 at Puetz golf and did not get a good fitting. I was fit for shafts too weak for my swing. I don't think the guy was paying attention since I told them I wasn't buying clubs from them. But I did spend $30... or waste it.

Ask around a bit.

Jeff

10.5° Callaway FT-iZ Tour

18°, 20°, 23° Adams Idea Pro Prototype Hybrid

4-9 Titleist 690.CB
48° Titleist Vokey Tour Nickel
54°, 58° Titleist Vokey Tour Oil Can

Scotty Cameron NP2, 33"

Awards, Achievements, and Accolades

Note: This thread is 7200 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Mostly pull cuts to slices. Some random pull draw/hooks pending of I hit the toe. 
    • What's the rest of that story? Where was the ball going?
    • The criticisms are starting already 🤣 U.S. Open pro criticizes Shinnecock green conditions: 'Bumpy' After playing his first practice round at the 2026 U.S. Open, Michael Kim offered a less-than-glowing review of Shinnecock's "bumpy" greens.   The sand, I don't care about that. If the greens didn't come back as well for latest aerification, that would be a bit of a blunder on Shinnecock I think.   
    • Well, if your frame of reference spins twice during the swing, then Bryson's ab/adduction is more like 780 degrees so there! (Yes I'm being silly, but not sure it's any sillier than what your pal Andy is doing...)
    • Update: Brandon Sorsby has decided to enter the NFL Supplemental Draft. He will not play for Texas Tech in the upcoming season.  From my perspective, I think he did the right thing. I hope he gets the correct help for his gambling addiction. I say the right thing, because I would be worried that the stress from all of this now and throughout the entire year would not be beneficial towards his mental health.  If an NFL team picks him up, then there really isn't any pressure for him to play immediately. He can work on himself and his game for the NFL.  From Texas Tech,  "Texas Tech will continue to provide the support and recovery resources Brendan requires on this journey. Furthermore, Texas Tech will not seek return of any amounts already paid to Brendan through his NIL agreements with the University," Campbell wrote. "We wish our best to Brendan, and we offer our prayers to him and his family as he chases his dreams at the next level. This has been an unbelievably painful experience for us all, but I know that his true, underlying character and lessons learned through this experience will ultimately bring him great success on the field of play and in life." Which, I also the right thing to do.   
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.