Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5634 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Ok, first off this is my first thread and this might be a silly question but I just recently bought a set of mizuno mp68s. 3-pw, I love the irons but when I first bought them and went to my weekly lesson the pro checked the lie angle really quick at the start with my 6 iron. He told me to have them bent 2* up from where they were and I ran across the street to have them bent before getting into my lesson. When I got there the lie angles were all different. pw-8 or so were standard then 7 was 1* from standard. The 6 iron was 2* from standard. 4-5 were 3* from standard and the 3 iron was 4* up from standard. This was from the factory.

The guy that bent them for me said that they do that from the factory to help players that slice the ball. He said that all of my irons should be bent to the same lie angle and because of the different angles he would bend them to 3*. So now all of my irons are 3* upright. Should I have them rebent to 2* upright from the factory specs for mizuno irons? I hit them well and accuracy is pretty decent but if bending them to what the pro told me will help then obviously I want to bend them to that.

Also the pro that I get lessons from is a club fitter for mizuno....

Posted
Ok, first off this is my first thread and this might be a silly question but I just recently bought a set of mizuno mp68s. 3-pw, I love the irons but when I first bought them and went to my weekly lesson the pro checked the lie angle really quick at the start with my 6 iron. He told me to have them bent 2* up from where they were and I ran across the street to have them bent before getting into my lesson. When I got there the lie angles were all different. pw-8 or so were standard then 7 was 1* from standard. The 6 iron was 2* from standard. 4-5 were 3* from standard and the 3 iron was 4* up from standard. This was from the factory.

If your pro is a club fitter for mizuon, why aren't you asking him?


Posted
You should have seen what the 6 iron was, then had him bend everything so it was 2 upright from that.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Posted
You should have seen what the 6 iron was, then had him bend everything so it was 2 upright from that.

so I am correct in that not all the clubs will have the same lie angle then. And I am asking here because the pro was the one that confused me to begin with. Ill just get the factory specs off of mizuno and take them somewhere else and have them bend them 2* up from those specs.


Posted
Mizuno's are flatter than most brands. Try looking up the specs of a few different brands to compare. You will also see that the progression from 3iron to wedge also varies slightly brand to brand.
Driver: Callaway Diablo Edge 10*
Woods: Mizuno F-60 (15*, 18*); Hybrids: Callaway FT-iZ 21*, Callaway X 24*
Irons: Mizuno MX 25 (5I - GW)
Wedges: Mizuno MP T Chrome (56/10), MP T-10 Black Satin (60/8)
Putter: Odyssey White Hot Tour #9

Posted
Can't you just sit down with your pro and have him explain it to you until you understand? It seems that you trust his judgement, so go with what he has to say no? Don't be shy to tell him you don't 100% understand what he's saying. I donno, just my opinion!

Cheers,

Posted
Can't you just sit down with your pro and have him explain it to you until you understand? It seems that you trust his judgement, so go with what he has to say no? Don't be shy to tell him you don't 100% understand what he's saying. I donno, just my opinion!

haha yeah I do trust him and thats what I did only thru email. I took my irons today with the factoy specs and told the guy to bend them 2 up from the numbers on the sheet that I brought in so I am good to go now. Thanks guys!


Posted
You should have seen what the 6 iron was, then had him bend everything so it was 2 upright from that.

Why? Only the club fitter will know what lie angle is right for each particular swing.


Note: This thread is 5634 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.