Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5599 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I was 'fit' for a set of Ping i5 irons (4-GW) about 5 or 6 years ago. My swing 'tendency' was to lift a bit and straighten my arms, thus causing me to hit out towards the toe of the club. Thus, I was fitted for 'silver' (3.75*) upright clubs.

Fast forward 5 years and now my swing is much better and more consistent. However, now I have a problem where I will sometimes hit very close to the hosel of the club and (heaven forbid) even shank it sometimes. I think the main issue is the fitting of my clubs, since they are so severely upright. This seems to cause me to stand closer to the ball (unless I consciously move farther away). Does that make sense?

I'm going in for a fitting on Wed. with a local pro, I just wanted to get some opinions on fitting and adjustments so I have a better understanding of things on Wed.

In my :nike:  bag on my :clicgear: cart ...

Driver: :ping: G10 9*    3-Wood: :cleveland: Launcher
Hybrid: :adams: 20* Hybrid      Irons: :ping: i5 4-GW - silver dot, +1/2"
Wedges: :cleveland: 56* (bent to 54*) and 60* CG10     Putter: :ping: Craz-e (original blue)


Posted
You are generally fit based on your height, wrist-to-floor, and hand size. Some slight adjustments may have been made based on your swing, but it shouldn't change too much, if at all, when you get fit again.

Driver - Cobra S3 9.5* - Mitsubishi Rayon JavlnFX M7 
Fwy - Titleist 904F 18*
Irons - Mizuno MP-14
Wedges - Cleveland 588 54*, Ping Tour 58*
Putter - Ping D66 (iWi)

 


Posted
You can change your lie angle over time. If you changed your posture, or your arm position at impact, the lie angle can change. It's wise to note better players tend to hit more toward the hosel, while beginners tend to hit more toward the toe.

Posted
Im a maroon dot. 5.5 upright. Just take your clubs and them off a lie board. I doubt they are out of wack unless your arms grew or shrank. Ive been a +5.5 man since high school and im almost 30.

In my L8...
Driver: Launcher 460 9.5
Fairway Wood: 18 degree hybrid
Irons: G5 3-GW
Wedges: m/b 50, 56Putter: Anser 2Ball: D2 Feel


Posted
I did a fitting in 1995 and my color code was black. Two things have changed since then. First, I had hip replacement surgery and my swing changed dramatically as a result. Second, Ping refined its color coding system a few years ago, adding a few new colors to fill in some gaps in its previous system. I went in for a fitting earlier this year after I found that all my iron shots that used to go straight were going right. Big surprise! My color code went from black (standard) to orange (2.25 degrees flat). I sold my black dot i3s and bought a set of G2 orange dots. Now I hit my irons with a slight draw and all is well again.
My Implements of Destruction (carried in a Hoofer Lite bag):

DRIVER: Big Bertha Diablo 10 degree draw, Aldila regular flex
FAIRWAY WOODS: G2 14 degree 3 wood & 17 degree 5 wood
IRONS: S59 3-PWWEDGES: M/B 54, 58, & 60 degree PUTTER: I Series Anser 4 (or G5i Anser, Anser 2F, or original...

Posted
Im a maroon dot. 5.5 upright. Just take your clubs and them off a lie board. I doubt they are out of wack unless your arms grew or shrank. Ive been a +5.5 man since high school and im almost 30.

I don't think my clubs are 'out of wack', I think my swing has changed. I think I was fitted to try and correct a very faulty swing move, lifting up or changing my posture and then straightening my arms and hitting out near the toe. My swing was similar to Geoff Olgilvy's swing (see photos).

I would do the same thing, compensating with my athletic ability, but not as consistently as Geoff (obviously). I wasn't fitted because my arms were longer / shorter or my swing plane was flat / steep. According to the 'web fitting', I believe I should be closer to standard length / lie. I'm 6'0" tall, 35" wrist to floor (hard to measure myself), which I think is Yellow dot on website fitting. I'll find out more on Wed. when I go see a local pro.

In my :nike:  bag on my :clicgear: cart ...

Driver: :ping: G10 9*    3-Wood: :cleveland: Launcher
Hybrid: :adams: 20* Hybrid      Irons: :ping: i5 4-GW - silver dot, +1/2"
Wedges: :cleveland: 56* (bent to 54*) and 60* CG10     Putter: :ping: Craz-e (original blue)


Posted
My advice would be to trust your gut no matter what someone else tells you. I was fitted (over the course of an hour) for graphite shafts, 1/2" short and purple dots. However I have always hit standard lenght, regular steel shafts and red dot. And I hit them well.
If you find yourself on the border of 2 different color codes you might want to think about shot shape. I kept my red dots because it's easier to draw the ball. I certainly do not need any help fading or slicing and I sure don't want to encourage it by having too flat a lie angle.

David


  • 2 weeks later...
Posted
I'm 6' and 36.5" to the floor and I was fit for 1/2" long and 1.5 upright, I am picking up my clubs today and I am terrified.

Posted
I got refitted for clubs in 1994, and got a set that was 2* flat. The pro and clubmaker did a "tape test" on me, and found I was hitting back toward the heel on impact. This squared up my impact, got rid of periodic hooks with iron shots.

About 10 years later, I had the feeling I was "getting in my own way" on swings. Turned out I was crouching a bit too much. I took a more upright posture, and flattened my swing somewhat. End result = normal lie is now best for me in irons.

Fitter will look at your height | arm length | stance. Next, he'll probably put "impact tape" on the bottom of a couple of your irons, and let you hit some shots. Impact tape now has score lines on the bottom; in 1994 the tape test was just masking tape, and the clubmaker made an educated guess on adjustments.

Anyway, if you're into golf clubs it should be a very interesting experience. Let us know what happens.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
Black dot here on the G2's.

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


Posted
Fitting is really important. Even though I don't play Ping irons (only an I10 3-iron in my bag), I've noticed that lie angle can change quite a bit. When I started, I hit some Ping clubs at a demo day an turned out be a yellow (whatever lie angle that is). Did another fitting before getting my Titleist AP2s and turned out to be standard lie angle, the same lie angle I have on the Ping I10 iron I ordered a couple months before my Titleist irons.

Note: This thread is 5599 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.