Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5745 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Finally got my R9 3 wood, hits quite nicely. But, the paint on the crown, where the face meets the paint seems to chip rather easily. Anybody else experience this paint chipping with this club, or taylormade in general?

Posted
If you sky the 3 wood it will happen with any club.

Driver: 909D3 8.5* Diamana White Board X
3 Wood: MP 630 15* GRAFALLOY PROLAUNCH RED X
Hybrid: 909H 19* "Real" VooDoo X
3 - P: MP-68 KBS Tour Black Nickel X
56* 10 Wedge Vr60* 06 Wedge: VrPutter: Custom Made.Golf Ball: TOUR B330SI am the greatest, I said that even before I knew I was....


Posted
Yep, you can but the exact same paint on ebay. Some guy sells them.

OHIO

In my Revolver Bag
R9 460, RIP
R9 TP 3 Wood, Diamana 'ilima 70*Idea Pro Black 20*Titleist AP1 712 4-AW Spin Milled Black Nickel 56.08 & 60.10


Posted
thanks guys. I just purchased this club from timtheputterman, and I know he's got a good rep, but you never know.

Posted
I thought this was happening to my callaway driveway. I saw the paint chipping, looked at the warranty and found out that callaway's warranty doesnt cover cosmetic damage, so i just dropped it. Then on the 17th hole one afternoon, the club head snapped in half. Thankfully callaway sent be a brand new driver. Point of the story is, make sure it is purely cosmetic damage before you paint it. you might have cracked the club. Hopefully that didn't happen.

In my lightweight bag:

Driver: FT-iq 8.5*
3 wood: FT-i 3 wood
Hybrids: Diablo Edge hybrid 3-4

Irons: Diablo Edge irons 5-PW

Wedges: 50.08, 54.08, 60.10

Putter: Scottie Cameron Kombi S


Note: This thread is 5745 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Hello Golfing Buddies, It has been awhile since I posted but I am the Retired Old Man that asked for advice because I suffered two "T.I.A.'s about switching from playing right handed to playing left handed.  I purchased a Callaway Edge Left handed golf clubs. I changed the grips to oversize grips.  Well, two weeks ago and still at 79 years old, I shot a 44 and 47 on a small course in my hometown.  I am currently changing my shafts from regular flex to Senior flex.  So, you can see' it can be done! So, you other old timers; get with the program! Blessings to all of you. Retired Old Man (Terry Warner)  
    • Haiduk - Archdevil        
    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.