Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 2677 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Hi, everybody!

After watching Phil's short game DVD I googled Pelz' putting tutor, and after seeing the price I decided to make one on my own.

Here's a short howto:

Material: 1mm aluminum

Tools: hacksaw, drill, 5mm drillbit, countersink, file, sandpaper 80grit, marker pen

*) Just mark the outline of the tutor on a sheet of aluminum and cut it out with the hacksaw, see that the "bottom" end (where you put the ball later) is as straight as possible.

*) file the edges round and deburr all edges

*) mark the places for the marbles

*) drill the holes for the mables (5mm) and countersink them

*) sand the edges and the surface until it gets some satin finish (to make the ball slide less and have more "grip")

*) mark the ball place (40mm from the bottom edge) with the 5mm drill but don't drill through

*) draw the centerline square to the bottom edge

*) draw 2 lines parallel to the centerline, each one 25mm from the centerline

*) DONE

All in all, the whole tutor cost me nothing, zero, nada, 0,- because I had a sheet of aluminum in the workshop.

Ok, the marbles will be about 50cents...

Since I'm still waiting for my marbles to arrive, I don't know, if 10mm or 12mm will be best, but the calculated diameter could be 12mm.

Even without the marbles, just using the tutor on my indoor putting setup already helped me to work on my setup and get a good straight putting stroke.

With the 5mm holes you can even use 2 tees on the putting green to

a) fix the tutor so it doesn't move

b) use as gates instead of marbles

I looked at the pictures at the Pelz website and derived these measurements off of the size of the golfball (42-44mm diameter) showed there:

length: 220mm

wide end: 135mm

short end: 80mm

marble diameter: 12mm

distance between marble centers:

normal setting: 62mm

pro setting: 56mm

super pro: 50mm

And that's how it looks:

tutor01.jpg

Sadly I made an error measuring the holes for the pro-setting, but that doesn't matter to me, I will use the normal and super-pro settings...

Edit: _and_ I mis-measured the first line parallel to the centerline *g*

tutor02.jpg

maybe this will give others some help making one...

greetings

michi

  • Upvote 1

"I have my own golf course and Par is whatever I say it is. There's a hole which is a Par13 and yesterday I damn nearly birdied that sucker." - Willie Nelson


  • 4 months later...
Posted


Originally Posted by darkhunter139

Awesome thread! I might try this out. Problem is I am not very good with a hacksaw :)


You don't have to be - but then you should be better with a file ;-)

it's quite simple to make one, I spent quite too much time making everything perfect.

The most important things to make sure:

- the front and back edge are parallel and straight (so you can set you putter head this way)

- the ball starting line is perpendicular to the back edge, so you don't misalign

- if possible, keep the ball starting line right in the middle between the marble holes

greetings

michi

"I have my own golf course and Par is whatever I say it is. There's a hole which is a Par13 and yesterday I damn nearly birdied that sucker." - Willie Nelson


Posted

Nice job Michi.

I was put off the putting tutor by the price myself. I decided that I would do my own too! I have a putting matt in my house and decided to mark the lines onto that instead of making something seperate as I didn't see myself using it on a proper putting green. The practice green at my course is always too busy to get the opertunity to use such a device!

These are a couple of pictures of how it worked out. I heated a nail and burnt a small hole in the matt so the ball always goes into the same spot each time!

My iPhone Pic's 061.jpg

My iPhone Pic's 062.jpg

My iPhone Pic's 063.jpg

  • Upvote 3

S9.1 Pro-S
3 & 5 Wood
23deg Rescue
AP2 4-PW Project-X 6.0
Tour-W Gap & Lob WedgeWhite Hot 2-BallFT Org.14 Bag2.0


Posted

That's Awesome! I was considering making one myself. Thanks for all the measurements, now you've made my job easier.  I'm thinking about making mine out of 1/8" plastic. We have a CNC at work, so I should be able to just draw it in CAD then cut it out.

What's In My Golf Bag:

  Nike Machspeed Black 10.5* callaway.gif Diablo Edge 5 Wood, callaway.gifDiablo Edge 4 Hybrid
callaway.gif 5- Pw Big Bertha Irons Graphite Shafts
vokey.gif52* 8* Bouncevokey.gif56* 8* Bouncevokey.gif60* 7* Bouncerife.gifHybrid Tour Mallet


Posted


Originally Posted by flguy

That's Awesome! I was considering making one myself. Thanks for all the measurements, now you've made my job easier.  I'm thinking about making mine out of 1/8" plastic. We have a CNC at work, so I should be able to just draw it in CAD then cut it out.


In that case, how about banging out a couple dozen for your buds at the Sand Trap.

  • Upvote 1

Stretch.

"In the process of trial and error, our failed attempts are meant to destroy arrogance and provoke humility." -- Master Jin Kwon

Awards, Achievements, and Accolades

Posted

Wow, that putting mat is fantastic pierce!

I think I'll borrow that for my mat at home, too. Much easier than using the tutor!

greetings

michi

"I have my own golf course and Par is whatever I say it is. There's a hole which is a Par13 and yesterday I damn nearly birdied that sucker." - Willie Nelson


  • 1 year later...
Posted

Please SAVE YOUR $MONEY!!!!  Just get a flat stainless steel (no rust) 12 inch ruler, with a hole already put in for you, to set the ball into, & practice hitting the ball down a 12" line.  You can probably pick one up @ staples/office depot/or any drafting supply house.  It works great!!!  If you want to be creative, then use two tees as a gate @ the end of the ruler, but you really don't need to be so technical.  Just roll the ball on the ruler for the entire length.  The one I use is a "GAEBEL ENTERPRISES, INC., MODEL 1014" Mark


  • 5 years later...
Posted
On 10/4/2012 at 5:40 AM, markgolfer said:

Please SAVE YOUR $MONEY!!!!  Just get a flat stainless steel (no rust) 12 inch ruler, with a hole already put in for you, to set the ball into, & practice hitting the ball down a 12" line.  You can probably pick one up @ staples/office depot/or any drafting supply house.  It works great!!!  If you want to be creative, then use two tees as a gate @ the end of the ruler, but you really don't need to be so technical.  Just roll the ball on the ruler for the entire length.  The one I use is a "GAEBEL ENTERPRISES, INC., MODEL 1014" Mark

Late to the party I know...how bout a metal yard stick...quite a challenge!


Note: This thread is 2677 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.