what have i missed?

[TheRichie]

in my bag i have

nike vr full cavity 4-PW

nike sv wedge 60*

ben sayer c-300 driver (soon to be replaced with nike sq dymo2 st8 fit)

cheap 5wood from a 130$ set

putter from same cheap set

near future buys will be

nike sq 5wood

taylor made rsi putter or nike golf ic putter

Nike Golf SQ Machspeed Hybrid #2 19*

should i swap the 5wood for the 3wood?

[nickel_aTm]

First off, I'd add a couple wedges.  What I looked up had the VR full cavity PW loft at 45*.  I'd get a gap wedge (50-52) and also a wedge in the 54-56* range.  Your gap from 45 to 60 is huge.

Next, I'd add a 3-wood and a hybrid in the 18-20* range.  That would put you at the full 14 clubs.  Good luck.

[mlf16507]

Agree with the 52 and 56 Degree wedges.  Instead of 3 wood, I would recommend a fairway wood with at least 17 degrees of loft(4 wood)  5 Wood would work fine if you can't get 4 wood.

The chances of you hitting the 4 iron consistent is slim.

The ruleof thumb is average golfer cannot hit an iron that is more than 38" long and 25 degrees in loft. Therefore, look at 19 and 22 degree hybrids

[TheRichie]

Originally Posted by mlf16507

Agree with the 52 and 56 Degree wedges.  Instead of 3 wood, I would recommend a fairway wood with at least 17 degrees of loft(4 wood)  5 Wood would work fine if you can't get 4 wood.

The chances of you hitting the 4 iron consistent is slim.

The ruleof thumb is average golfer cannot hit an iron that is more than 38" long and 25 degrees in loft. Therefore, look at 19 and 22 degree hybrids

about the 4 iron, its still in my bag but i have no got a nike sq machspeed 3 hybrid and im hitting it well, first round with it tomorrow, can see it being used alot off the tee and long aproach shots oh and been trying it out with a putting stroke for a little chip and run, i love this club and even before i played a round with it haha