Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4988 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Anyone play them? Like them? Hate them?

Differences between the Z faces and the ZTP faces?

I know they're "milled" but the interchangeable faces are "forged." How's the feel? From what I can tell I like them, but hitting them in the store off of a mat into a net that doesn't show you ball flight, spin, etc… Makes it a bit difficult to pull the trigger on getting some. Im in the market for new wedges, and with everything new these days having "conforming" grooves, Im looking at some of the old stock of the non conforming groove wedges. I really like the Callaway JAWS wedges I have now, but they aren't made anymore and nobody in my area has them in stock, so I can't rebuy them. Plus eBay prices are a bit ridiculous and you never know what you're gonna get with used wedges online.

In my Ogio bag.

Titleist 910D2 driver, Adams irons & hybrid, Callaway wedges & a Nike Method putter.

And a yellow ball.
 

 

The great irony of life: "If nobody gets out alive, what's holding you back!?"


  • 4 weeks later...
Posted

Last yr I bought a 50degree xft wedge to replace my lost gap wedge.  I really liked the idea of just having to replace the face when the grooves wear out.  $30 is a lot cheaper than a brand new club.

I found that I hit this club 20-25 yds farther than my TM CGB Max gap wedge (also 50°) which was my 100 yard club.  Some of the difference was due to a swing change, but I really like the feel of the new xft club.

My 56° RAC TP used to get me ~90 yards full swing, and is now my 100 yard club.  I just replaced it with a 54° xft to reduce the gap between the two.  Next I will replace my 60 RAC TP with a 58 xft.

As you can tell, I really do like them!

In my TM r7 Stand bag:
Driver- r11 10.5° Reg shaft

Fairway wood - r11 3 wood
Hybrids- r11 3, 4 & 5
Irons- M1 6-AW, xft 50, xft 54.12 , xft 60.08°
Still have / love my r7 CGB Max 6-PW, xft 50, xft 54.12, xft 60.08° which I keep in Myrtle Beach, Tommy Armour 855 Putter


  • 2 weeks later...
Posted

These wedges are great.  I've been using the 60 degree for about 6 months and love it.  I like the feel and the club is a little heavier which I like a lot in a wedge. Because I liked the 60 so much, I went out and got the 56 and 52 to complete the set and like those just as much.  My distance is a bit longer, but for me, wedges are about feel and control and these work great for me.  I've only used the new grooves, but I hear there's not much difference as far as an amatuer can tell.

I'm not usre if you have made any decisions yet, but I know that Golfsmith has them on sale "new" for $59.99 right now.  I just sent one of my buddies over there today since he's hit mine and loves them.

Good luck.


Note: This thread is 4988 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Wordle 1,667 5/6* 🟨🟨⬛⬛⬛ ⬛🟨🟩⬛⬛ ⬛⬛🟩🟩⬛ ⬛⬛🟩🟩⬛ 🟩🟩🟩🟩🟩
    • Day 21 - 2026-01-10 More mirror work focused on hip. 
    • I appreciate that you have taken the time to come back and update. Based on what was previously discussed I feel like the points were; forged, feel good, price, and possibly players distance. If you like the "looks" of those Maxfli irons and if price is a major point, then going straight to the source, Maltby, might make sense. Specifically, the TS3 iron. I was looking into this myself and found some reviews: Fit2YouGolf, Lets Play Thru, and ELITE FIT GOLF. As per your update I found the Maxfli to be ~$1300 fitted the way I wanted. Where the TS3 with the same fitting and assembled by Golfworks was less than $750. I suppose the downside is to actually hit the iron you will need to get lucky and find someone in your golf circle who will let you hit theirs or order a 6 or 7 iron to test. However, the way I look at that is being equivalent to some fittings. If you like the results and buy, then the fitting is free, otherwise the price of the fitting is a sunk cost. If name brand is important, then I submit for your consideration - THE BEST OVERALL IRON of 2024...... FACT !! 😉 A bit tongue in cheek that but also, I feel some good points were discussed.  
    • Day 150 1-10 focus on arching the wrist and getting the ball to go left. Recorded, hit foam balls. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.