Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

TaylorMade R11 Driver Head Rattle

Precis1on
 Share
Note: This thread is 4580 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Precis1on Well Established Member

Precis1on

Posted
Posted

Hey Guys,

My R11 from last year has some rattling bits going around inside the clubhead. It doesn't bother me when I'm swinging, but the driver doesn't sound the same anymore. It sounds like I'm hitting the ball with a hollow piece of wood rather than that high pitched crack that I normally get.

What should I do? Call TM for a replacement? Take it in somewhere to get it looked at? I'm disappointed, I only got this driver last year. Might give me an excuse to shell out for a Ping i20 though :).

Driver: :tmade: R11 9.0 - Bassara Griffin UL - Tour Stiff 3-wood: :tmade: R11 Ti 15.0 - JAVLNFX M6 - Stiff Hybrid: :tmade: Rescue Hybrid - JAVLNFX Hybrid - Stiff 4-PW: :mizuno: JPX 800 PRO - Nippon 1150 GH Tour - Stiff Wedges: :edel: 50/56/60 - Nippon WV 125 Putter/Ball/RF: :edel: / :bridgestone: B330 / :leupold: GX-3i


dlance Member

dlance

Posted
Posted

Typically if something like this happens you can send it back for repair/replacement. I have done this several times with my Scotty Cameron Putter when the shaft was coming loose from the head one time and a pin was loose in the shaft (rattle like you are describing) the 2nd time. It can take a little bit to get back, but it is a heck of a lot cheaper then buying a new club...

of course if you are leaning towards another club anyways, you can send it back for repair, buy the new club, then sell the R11 when you get it back to make the new club cheaper.


jlt73 Established Member

jlt73

Posted
Posted

have you checked to make sure the weights are tight?

Driver:    SLDR TP 9.5* (Tour AD DI 6S)

Wood:   Jetspeed 3W (Aldilia RIP Alpha) & SLDR 5W (Diamana Kai'li)

Hybrids: Rescue 11 3H (18*) & Rescue 11 4H (21*)

Irons:     Rocketbladez Tour 4-PW

Wedge:   ATV 52* & 58*

Putter:   Bettinardi Signature 6


Precis1on Well Established Member

Precis1on

Posted
  • Author
Posted

I actually took off all of the weights and shaft and tried to get the bits to fall out of the head. No dice there. Going to take it in to Golfsmith or Golf Galaxy and see what they say. Will probably just get a replacement head from TM in the end though.

Driver: :tmade: R11 9.0 - Bassara Griffin UL - Tour Stiff 3-wood: :tmade: R11 Ti 15.0 - JAVLNFX M6 - Stiff Hybrid: :tmade: Rescue Hybrid - JAVLNFX Hybrid - Stiff 4-PW: :mizuno: JPX 800 PRO - Nippon 1150 GH Tour - Stiff Wedges: :edel: 50/56/60 - Nippon WV 125 Putter/Ball/RF: :edel: / :bridgestone: B330 / :leupold: GX-3i


  • 10 months later...
Precis1on Well Established Member

Precis1on

Posted
  • Author
Posted

Hey Claude,

I took my driver to a custom club shop for them to look at. Apparently the screw threads of the weights were beginning to break off inside the head. Normally they put rat glue inside the head to catch debris like that, however the debris on my head wasn't sticking.

When they attempted to take my toe weight off, the entire thing snapped and I was left with a screw bit stuck in my driver. They put some rat glue inside my driver and it caught the bit and the debris inside. They gave me a free weight which is now glued into the toe because of the rat glue they shoved in there, but no rattle and I don't plan on moving the weights at all.

So the solution from my above experience, is to get a very thin pipette and squeeze some heated rat glue inside your club. Shake your clubhead to get the debris to stick on that rat glue. Either way... I'd be careful :).

Driver: :tmade: R11 9.0 - Bassara Griffin UL - Tour Stiff 3-wood: :tmade: R11 Ti 15.0 - JAVLNFX M6 - Stiff Hybrid: :tmade: Rescue Hybrid - JAVLNFX Hybrid - Stiff 4-PW: :mizuno: JPX 800 PRO - Nippon 1150 GH Tour - Stiff Wedges: :edel: 50/56/60 - Nippon WV 125 Putter/Ball/RF: :edel: / :bridgestone: B330 / :leupold: GX-3i


RayG Great Member

RayG

Posted
Posted
Has that fixed the noise issue? If it doesn't sound like the original club and is still getting that wooden thud, I suspect a bit more than just a bit of screw being loose. (not you, the club...:-D)

Note: This thread is 4580 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • iacas
      "5 Minutes Daily" Practice Challenge

      By iacas · Posted

      Day 444 - 2025-12-18 Light day of hotel room work. GEARS Summit v2.0 today. Good day.
    • WillieT
      "5 Minutes Daily" Practice Challenge

      By WillieT · Posted

      Day 38 (18 Dec 25) - got out in the backyard with grandson this afternoon.  We got into a little game of pitching the ball from about 25yds to a target point just off the asphalt lane behind the backyard.  Goal - just clear it with a quick hop and stop.  Focused on using the wedge swing motion I was talking with the course pro yesterday….smooth and thru just bruising the grass.  In addition to a concentrated focus on technique, it also called for a quiet mind locked in on target point.  Rehearsed this with both the 50° and 55° wedges.  
    • Ty_Webb
      The Spin Axis Podcast

      By Ty_Webb · Posted

      I listened to the Shaun Webb one about the swing coach app. Sounds like a great thing and will (hopefully) be very useful for me. I do think the hosts are underestimating where AI could be in a few years. Right now it's just regurgitating stuff that it has been told or it has scrubbed from somewhere else and a human guiding things will be quite a lot more helpful than just the AI, but it's going to keep developing and it will reach the stage where it's figuring this stuff out on its own. Time will come when it will have you do a TPI style screen and take various height/arm length/leg length etc. measurements, have you tell it some history and your time constraints and goals and what not and it will watch a video of your swing face on and DTL and it will know exactly what you need to work on. 
    • turtleback
      Optimum Golf Channel Games

      By turtleback · Posted

      I found it entertaining, but the announcing was lousy.  How did the measuring on the final shot start with Rory being closer and being told he won, and then with no explanation it turns out Scottie won?  Weird.
    • 5amZ
      "5 Minutes Daily" Practice Challenge

      By 5amZ · Posted

      Day 128 12-18 Worked on rotation and getting to lead side. Still working on the flow feeling while doing that. Recorded swings. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept