Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4883 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I use to be very consistent with my irons, Always withing 5 yards down to the 6 iron. However recently I have a lot of fades and push shots. I always use to have a tight little draw and I am confused on what I am doing. I have attached a video. Hopefully some of you can have an idea and help me.

Driver Taylormade r9 supertri *9.5
Hybrid Taylormade rescue burner 19 degree
Irons 2008 taylormade TP
Wedges Taylormade rac TP 52, 56, 60
Putter Scotty Cameron Newport 2.0 Studio StyleBall Bridgestone e6

Posted

Here is the video, when I use to hit all my shots very crisp through the ball. Straight or little draw. Any ideas?

Thanks

Driver Taylormade r9 supertri *9.5
Hybrid Taylormade rescue burner 19 degree
Irons 2008 taylormade TP
Wedges Taylormade rac TP 52, 56, 60
Putter Scotty Cameron Newport 2.0 Studio StyleBall Bridgestone e6

Posted

Any ideas, sometimes I have a very strong pull as well. I can not seem to figure it out. I have always relied on my irons. Am I coming across the ball. In my second video I feel like my follow through is a straight path through the ball, as the first video I may be coming across the ball.

Driver Taylormade r9 supertri *9.5
Hybrid Taylormade rescue burner 19 degree
Irons 2008 taylormade TP
Wedges Taylormade rac TP 52, 56, 60
Putter Scotty Cameron Newport 2.0 Studio StyleBall Bridgestone e6

Posted

I am no expert but I am gonna throw in my .02

If you are fighting a slice and a pull then I imagine that is caused by an over the top swing.

If face is open with this path then you would be hitting a fade/slice while if you have the face square to the swing path it would be a pull. You would almost never see a draw if your path was out to in.

Maybe concentrate on swinging more in to out.

Bag: Ogio Ozone XX

Driver: :titleist: 910 D2 (Project X 7A3)

3 Wood: :titleist: 910F ;(Mitsubishi Rayon Diamana 'ahina 82)

Hybrid: :titleist: 909H 19* (Diamana Blue)

Irons: :titleist: 755 3-P (Tri Spec Stiff Flex Steel)

Wedges: :titleist: (Vokey 52* 56* 60*)

Putter: Ping Karsten Anser 2

Balls: :titleist: Nxt tour/ Prov1x


Posted

The ball position in the top video looks like it's too close to your body. It might be a different club or crooked camera, but try to have the space the width of a hand or so between your body and the butt of the club. Hard to hit a draw with your hands pulled in like that unless you put it way back in the stance, which isn't useful on most shots. On the other hand, it's easy to come across, resulting in pulls and slices.

I'm not much help on the rest of your swing but that's Occam's razor and a likely cause.

And don't practice swinging in a space that small; you could throw off your setup. You can't play good golf if you don't set up properly.

In My Bag:

Adams Super LS 9.5˚ driver, Aldila Phenom NL 65TX
Adams Super LS 15˚ fairway, Kusala black 72x
Adams Super LS 18˚ fairway, Aldila Rip'd NV 75TX
Adams Idea pro VST hybrid, 21˚, RIP Alpha 105x
Adams DHY 24˚, RIP Alpha 89x
5-PW Maltby TE irons, KBS C taper X, soft stepped once 130g
Mizuno T4, 54.9 KBS Wedge X
Mizuno R12 60.5, black nickel, KBS Wedge X
Odyssey Metal X #1 putter 
Bridgestone E5, Adidas samba bag, True Linkswear Stealth
Awards, Achievements, and Accolades

Posted
Thank you for the input, any other ideas?
Driver Taylormade r9 supertri *9.5
Hybrid Taylormade rescue burner 19 degree
Irons 2008 taylormade TP
Wedges Taylormade rac TP 52, 56, 60
Putter Scotty Cameron Newport 2.0 Studio StyleBall Bridgestone e6

Posted

Your top video could be misleading because you aren't actually hitting a ball. But, comparing the two swings, you are not turning through the ball as you were previously. I've drawn a few lines to illustrate this. Hopefully this helps and maybe someone better qualified to help will chime in here as how to fix it. These 2 pics were both right before impact.


Posted
Thank you for the input that's true I don't think I'm turning through the ball. Does anyone have any suggestions on how to practice this. I feel like I'm sliding my hips instead of turning through. Please let me know if any drills if possible thank you. Also, I don't feel as I my hands are rotating through the swing.
Driver Taylormade r9 supertri *9.5
Hybrid Taylormade rescue burner 19 degree
Irons 2008 taylormade TP
Wedges Taylormade rac TP 52, 56, 60
Putter Scotty Cameron Newport 2.0 Studio StyleBall Bridgestone e6

Posted

The one thing that really stands out from the first swing to the second is your top of the backswing position. In the second swing when you are hitting good you are completing the backswing in a parallel position to your target line. In the first one you are most definitely not completing the backswing and looks like the club is laid off.Really check and see if you have changed something in your setup from the first to the second swing.


Note: This thread is 4883 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 22: mirror work for a while. Working on my elbow in the downswing - keeping it in a better position. 
    • Day 36 (16 Dec 25) - continued the exaggerated left foot weight shift trigger adding some easy low flighted pitches with the 5h and a few putting style bump and runs with the 5h as well.
    • Day 442 - 2025-12-16 Got some swings in at an indoor academy a little south of Erie.
    • Has anyone played the new Maxfli forged irons? For the first time in I don't know how many years, they have come out with new clubs. From what I read, Maxfli was bought by Taylor Made a long time ago which then took all of their ball making technology and patents in order to get into that market. The club business was left to whither and the reorganized company, now a part of Dicks / Golfworks / Maltby, is producing these new clubs. (Their Tour X balls which I play are really good.) Anyway, I tried them both out at Golf Galaxy. There's a player's distance iron (XC-3) and a blade (XC-2) and both feel really, really nice, almost "Mizuno-like" in their soft buttery feel and they're a bargain at $800 for a set. I'm planning to ditch my Titleist's and want to go back to a forged iron. I almost pulled the trigger on the Mizuno Pro-245's last summer, but a damaged tendon sheath in my finger combined with a back injury messed up my golf game so I held off. Now the Pro-245's are no longer available, soon to be replaced by the MX-15. (At twice the price of the Maxfli's...that's what got my attention in the first place.) If anyone has played with the new Maxfli's or just tried them out like I did, let me know what you think.
    • Day 126 12-16 Back swing and rotation work today. Didn't hit any balls. Focusing on rotating and getting to lead side. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.