Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

Putter Identification Help! Jerry Barber Diamond Face Putter


Note: This thread is 5017 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hello, I am Looking for information on a Putter I purchased from a Gentleman in Moreno Valley California about 20 years ago (Leon Pounders) He said he bought it off of H.H. Jones (The Club Finder).
I have always wondered about the history of the putter, when it was made, what company made it, etc.
Leon told me it was Jerry Barbers personal putter which I had no reason to doubt but always did anyway.
The putter looks in shape much like an IMG Style or Wilson 8800 series,
It has 3 diamonds on the face in the center, near the toe on the face it is stamped Diamond Face, on the back near the toe it is stamped JERRY BARBER
On the top line there is a site line nearer the heel than center.
I am including some photo's of the putter so you can get a visual of it.
If you can share any information about it or can send me in the right direction to find out more I would greatly appreciate it Please reply to davidrietter@live.com or to ia8750@hotmail
Thank you to anyone who can help
David Rietter


Posted

Looks nothing like an 8800 series putter. I have an 8875 and an 8881, and the others ive seen look nothing like it.

In the Ogio Kingpin bag:

Titleist 913 D2 9.5* w/ UST Mamiya ATTAS 3 80 w/ Harrison Shotmaker & Billy Bobs afternarket Hosel Adaptor (get this if you don't have it for your 913)
Wilson Staff Ci-11 4-GW (4I is out of the bag for a hybrid, PW and up were replaced by Edel Wedges)
TaylorMade RBZ 5 & 3 Fairway Woods

Cobra Baffler T-Rail 3 & 4 Hybrids

Edel Forged 48, 52, 56, 60, and 64* wedges (different wedges for different courses)

Seemore Si-4 Black Nickel Putter


Posted

Yeah, most 8800 series are more rounded and the top line doesn't raise at the toe. I am just curious if anyone knows anything about the maker, when and etc.


Note: This thread is 5017 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
    • Day 56 (4 May 26) - Worked on some ball-then-ground drills - going from P3 thru impact - with a slowed tempo, working to keep all parts in sync.   
    • Wordle 1,780 3/6 🟩⬜🟨🟨🟨 ⬜⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,780 4/6 🟨⬜⬜⬜🟨 ⬜🟨🟨🟨⬜ 🟩🟨🟩🟨⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.